Your cart is empty.
Your cart is empty.Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint, Quick Boots come in halves that are joined by an adhesive weld compound, and Speedi Boots are split boots that are bolted together around the axle.
Gassy
Reviewed in the United States on March 7, 2025
doesnt fit to my chevy venture,
Customer
Reviewed in the United States on August 23, 2024
Very happy with this boot. I used a compressor expander and it slipped right on to the axle no problemVery happy.
Fescobar
Reviewed in the United States on September 22, 2022
this boot was used on a 97 4runner. so It worked but you have to "mickey mouse it" (Mexican mechanic slang for winging it).If your inner cv boot has the three flatten edges you will need to retain the older edge and it will need to be sandwiched between the cup and new silicone boot to ensure proper fit.If you do not have the special tool to stretch the boots make sure you have the cv joint off the car (it will go easier trust me).To prevent the new silicone boot from flying off when you try to cinch the tie strap down you need a clean grease less surface. something that is difficult to have when this job requires you spreading grease all over the bearings and inner cup. so don't crank on the tie down tool too much! Otherwise you will have wasted a tiedown and will need to find new zip ties. I opted to use the metallic zip ties that have tat locking ball bearing, lets see how long it lasts.Many forum users recommend you to leave the old outer tie down on the original groove to prevent the more pliable silicone boot to flopping of that groove.This was not an easy task but it helps you keep the original cv axle as opposed to a cheaper quality rebuilt one.
marty0715
Reviewed in the United States on December 25, 2022
great
Customer
Reviewed in the United States on April 13, 2022
Wrong size for my vehicle
Brownidangel4
Reviewed in Canada on August 3, 2018
It worked arrived on time didn't realize it was grey..
Stacyloro
Reviewed in the United States on July 15, 2017
Worked as intended just a huge pain to stretch. Ended up just taking off the entire Cv axle. And ripped the inner trying to get it off to pass the outter by. Had no idea there is a boot stretcher for it. Lol i used a 4" PCP pipe to stretch it over for the driver side. BUT the silicone is def the way to go. But screw ties the one that come with it are a pain in the ass.
DannyBFresco
Reviewed in the United States on December 12, 2017
This did not fit the inner CV joint on my 2006 Tacoma 4x4 V6, although it says it will. The tacoma inner cv joint has curves that do not fit this item’s simple circular shape.
Customer
Reviewed in the United States on March 28, 2016
perfect and easy to fit always a pleasure to deal with Amazoncheers Rick
Recommended Products
