Your cart is empty.
Your cart is empty.Diablo Saw Blade
SD floors
Reviewed in the United States on March 8, 2025
How cow this thing is a beast. Cuts through quarter inch steel and it's cool to the touch, that's no exaggeration. Very impressive.I didn't hold the plate down well enough because it was a little bit cupped from welding. Got a big kickback(my fault) and it didn't even break a tooth off. I'm extremely impressed. I also cut through welds with it, it doesn't even leave a burr. It's almost a mirror finish. Totally nuts.
outrider
Reviewed in the United States on February 8, 2025
I could not believe how easily the blade cut through the steel.
DB STOUT
Reviewed in the United States on January 24, 2025
I mounted this on an old chop saw (miter saw), and it works wonders for cutting through metal. I've used it to cut through mild and stainless steel, up to 1/4 inch thick, and 6061 aluminum. I was surprised at how easily. Cutting through that 1/4 inch steel felt about the same as cutting through a pine 2x4. Quick and easy, with very little downward pressure on the handle during the cut. And the cuts are clean and smooth.My chop saw spins at 5000 RPM, and this diablo blade is rated at 5800, so it has been a good combination with no problems. Exceeding the max of 5800 may very well cause problems such as dulling the blade, so keep that in mind if your saw spins faster, and many do.While researching this blade, one reviewer commented that it is good for cutting through metal when the entire blade width is in contact with material. However, it is not good for shaving material off the end of a piece, as is commonly done to make a piece of wood just a little shorter. I can confirm that it's not good for this when cutting steel, as it creates a lot of vibration, and I was concerned that even a tightly retained piece could be sent flying. But for cuts down the middle of a metal piece, it's great.Since I'm too lazy to switch it out for a wood blade to make the occasional wood cut. I can confirm that it's a perfectly adequate wood saw. Not the best for making furniture grade cuts, but just take your time going through wood, and you get a clean enough edge for your rough cuts.
Darkling
Reviewed in the United Kingdom on January 13, 2025
Fantastic blade, long lived, of you use these carefully rather than recklessly they last AGES and do a fabulous job - can't recommend too highly
AlohaJeff
Reviewed in the United States on March 24, 2024
Cutting aluminum and stainless steel sheet with a circular saw may seem crazy but it works great. I have had the aluminum specific blade for a couple years and it is awesome for ripping aluminum sheet for boat projects. The Stainless Steel blade works "good" but not great. I noticed a big negative change in cutting performance over a relatively short period of time (only a few cuts) which means that cutting stainless material with a circular saw is going to get fairly expensive using this method. It still beats using a band saw as the cut can be made VERY straight on large pieces of material. It's a "good" blade but I don't think it's great for the $$ paid.
Nicholas Phan
Reviewed in the United States on December 17, 2024
I bought this because I needed a more accurate and clean cut. Luckily my worx miter saw takes 7.25 blades. It's not the strongest saw because it is battery powered but it still managed to get the job done. I used oil and cut really slow but the results are perfect! It will still need some cleanup after the cut but the cut itself is flawless.
Customer
Reviewed in the United States on December 11, 2024
Great metal cutting blade for the price. used on steel 2" and 4" square tubing for construction. You need more than one for 60 or more cuts of this tubing I used.. still a great value for the price..
Cliente de
Reviewed in Mexico on November 5, 2024
Pieza para taller es la segunda vez que la compro y me resulta muy útil.
Steve
Reviewed in Canada on November 3, 2024
Great blade cuts perfectly just as advertised
jerry
Reviewed in the United States on October 31, 2024
this blade so far has cut about 30' of 1/4" iron deck plate and still no indication of failure.it makes smooth accurate cuts. this was my second blade as i had another blade from the local Menards store that lasted only 6'. i would not hesitate to buy this blade again. i did use a steel cutting fluid sprayed the surface as i was cutting.
Dr. Bigfoot
Reviewed in the United States on October 29, 2024
I like fabricating random stuff out of metal, and bought this because I was sick of the messy cuts abrasive saws and grinders make. I didn't expect much, but this blade is great. It cuts through 1/8" steel cleanly and doesn't wander the way abrasive wheels do. It saves a lot of time cleaning up and grinding the cuts before welding. I can't speak to how long it will last, but the amount of time it saved me building a picnic table frame was worth the purchase price alone.
Marcell K.
Reviewed in Australia on June 14, 2023
Cuts thick steel easily, very satisfied
MOHAMMED ALSHAHRY
Reviewed in Saudi Arabia on October 23, 2023
وصل المنتج بدون غلافة الاصلي
Recommended Products
$48.86
$ 20 .99 $20.99
$35.99
$ 15 .99 $15.99