Your cart is empty.
Your cart is empty.Quick OverviewThe Dayton Audio line of 2-way crossovers were designed using a second order (12dB) Linkwitz-Riley alignment. Dayton Audio metallized polyester film capacitors are used in both the high and low pass sections. Product Highlights 18 gauge inductors were used to keep DC resistance to a minimum Unique design feature of the low pass section allows use of 4 or 8 ohm woofers All components are glued or fastened down to eliminate buzzing and vibrations High quality blue PC board uses a back plate for added rigidity Product Manuals / Spec Sheets / Downloads AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis 11 Product Description The Dayton Audio line of 2-way crossovers were designed using a second order (12dB) Linkwitz-Riley alignment. Dayton Audio metallized polyester film capacitors are used in both the high and low pass sections. 18 gauge inductors were used to keep DC resistance to a minimum. A unique design feature of the low pass section allows use of 4 or 8 ohm woofers, perfect for building DAppolito style or multi woofer 2-way systems. The high pass crossover frequency is rated for an 8 ohm load. All components are glued or fastened down to eliminate buzzing and vibrations. The high quality blue PC board uses a back plate for added rigidity and eyelet holes for easy mounting. Available in a variety of crossover points. 300W power handling. Board measures: 6-1/2 W x 4-1/4 H x 1-3/8 D. Product Details Model Number XO2W-2K List Price $36.99 Unit of Measure Each UPC 844632045134 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 1.25 Product Weight -- Product Height 4-1/4" Product Width 6-1/2" Product Length -- Product Depth 1-3/8"
Juan P
Reviewed in the United States on April 10, 2023
Used these on a pair of bookshelf speakers to cross the woofer from the full range. Work great for me!
OTTO
Reviewed in the United States on October 18, 2022
You you need a pre built crossover that sounds good and won't break the bank I'd suggest the Dayton line of crossovers. I rebuilt a pair of speakers using a driver that needed to be crossed at 2500 and this fit the bill. I now have a good sounding pair of garage speakers that punch above their weight.
Tor Arne Svortevik
Reviewed in the United States on July 13, 2019
One of the two units I purchased was defective.
Rome's Play 1
Reviewed in the United States on October 10, 2019
Ok
Consumer Type Person
Reviewed in the United States on February 29, 2016
These have been great. I've used them as "starters" for testing a number of speaker projects, then built the actual or final better tuned crossovers for the projects afterwards.I have a speaker set (woofer and tweeter separates, stackable) that both should have very very ruler flat even responses, so they are something that I can use a "cookbook" crossover for - they should work that way, should be able to use a cookbook crossover with them, if not, they're way off for what they are and how they should work.For newbies I think these are great for getting one's feet wet. You can always swap back and forth between this and a crossover you're attempting to build yourself. Nice to have your setup useable, working, while you're trying to learn and build for it.Present thinking doesn't think much of cookbook crossovers like this but they can have their uses and be modified. In any case they are great for people getting started in the speaker building hobby and they can always improve their builds.
Travis Piper
Reviewed in the United States on April 21, 2016
Works great, no noticeable loss in power. This is going into a set of custom speakers.
Bryan
Reviewed in the United States on August 9, 2013
Bought this for a Gem Sound GSP-15 speaker that i got from a friend, got two but only one needed a new board. Ordered this and once installed it sounded better than the one that had the original board. Ordering a second one so the speakers sound the same.It's been going strong for three years now with no sign of dying. Will always use these boards.
FRANIXS
Reviewed in the United States on August 29, 2011
I'm Happy with this , I was a bit ife about this ,but after useing it on some speakers i had befor ,, it made it sound way better ,, I would say it was a good buy
Recommended Products
