Your cart is empty.
Your cart is empty. Having a pressure chamber is all well and good, but unless you maximize the space inside you're going to have a rough time making dice sets at a reasonable pace...
This is a shelf system designed to hold small molds in a Harbor freight pressure pot during the resin casting process.
The stand is laser-cut from birch plywood and comes with wooden pieces. The stand is very easy to assemble, with no glue or tools required. The locking tabs allow you to take any of the shelves off of the stand to accommodate molds of different sizes.
Size:
7.5 inches tall, 9 inches in diameter (assembled)
Ralph B. Chilton
Reviewed in the United States on August 29, 2024
Some of the joints can be a bit tight during construction, so take your time and sand where necessary.
Hugmungus
Reviewed in the United States on June 13, 2023
The product is nice, quality is good, but the support being in the center limits what you can put on the shelves.
S. Loges
Reviewed in the United States on March 17, 2023
Parts were laser cut fit and form were exceptionably good. fits i my pressure pot well.Recommend
Nicole K.
Reviewed in the United States on January 25, 2023
This is a great concept, but when working with resin, you cannot get any of the spillage that happens during curing time off the wood, so you end up not being able to use it multiple times.
-That- guy
Reviewed in the United States on March 26, 2022
Just finished assembling this and quite pleased with the final product; however, it was a little tough to assemble as the tolerances were just a little bit too tight. I ended up having to use a screw driver handle as a sort of rubber mallet to get the first two pieces all the way together, and again to get the bottom plate on.I then used the torx head as it has a mostly flat end to push the circular locking bits in place, as they would not slide into their slots without the additional force.Good product, just a little hard to assemble.*Edit: I should also add that this fits perfectly well in my Vevor pot available on amazon which I converted for use with resin, so it's not just for the ones from Harbor Freight =)
Customer
Reviewed in the United States on December 9, 2022
I make handmade dice with resin and this was perfect to put in my pressure pot and make the most of the space. A little flimsy feeling and resin sticks to it pretty badly, but i still love it!!
LuciHara
Reviewed in the United States on January 29, 2022
This was exactly what I needed for my pressure pot! It was easy to assemble and it’s surprisingly sturdy. I highly recommend this for anyone who needs a multi-level rack for their pressure pot.
Grant S
Reviewed in the United States on April 29, 2022
This stand is made from very flimsy particleboard, probably worth about $1. It will hold some small molds, but if you're planning to use a dice mold that makes more than one die, or make any kind of dice box, this thing won't do the job. Because the supports are in the middle and shape it into quarters, it really limits the space to place anything larger than a single die mold. Moreover, any resin that gets on this thing is there to stay - wax paper can mitigate this, but one leak, and now you have an uneven surface. For this price, you're better off getting a Lazy Susan that will fit your pressure pot. It's plastic, so the resin will peel off of it, it's supported on the outside, and it's far more sturdy. Here's the one I bought...https://www.amazon.com/dp/B07N1WBRHP?ref=ppx_yo2ov_dt_b_product_details&th=1
Recommended Products
