Shopping Cart

Your cart is empty.

Your cart is empty.

AC DC Clamp Leakage Current Sensor Tester with Output Connector BNC Plug Clamp CT Size 16mm x 18mm

5.0 Write Review
Free shipping on orders over $29.99

$123.99

$ 49 .99 $49.99

In Stock

About this item

  • ◆ AC/DC Clamp Leakage Current Sensor, suitable for high-accuracy AC and DC current and leakage current on-line detection below 600V, range: AC/DC 0mA~60A, corresponding output AC/DC 0~600mV, jaw size is 16mm x 18mmS
  • ◆ Detection method: Clamp CT, non-contact measurement; Resolution: AC/DC: 1mA; Accuracy: ±3.0%FS (50Hz/60Hz; 23°C±2°C);Power Consumption: ≤5mA; Frequency response: AC: 45Hz ~ 400Hz; DC: 10Hz ~ 10kHz
  • ◆ Voltage output: Two-speed output: 0mA~6A, 100mV/A; 6A~60A, 10mV/A; Zero adjustment: Adjust ZERO key can be zero, eliminate the interference of geomagnetic field and external electric field;
  • ◆ The sensor adopts the clamp-shaped CT structure, which can be measured without disconnecting the measured circuit. The slim design of the clamp head is particularly suitable for the place where the cable is densely packed. The permalloy iron core is used, and the anti-interference ability is strong to ensure the accuracy of measurement. stability.
  • ◆ Widely used in power, communications, meteorology, railways, automotive industry, oil fields, construction, measurement, research and teaching units, industrial and mining enterprises and other fields.


Shipping Policy : Battery Not Included During the Shipping
Technical Specifications
* Function: AC/DC leakage current, low current test
* CT size: 16mm x 18mm
* Range: AC/DC 0mA～60.0A
* Voltage output: Two-speed output: 0mA~6A, 100mV/A; 6A~60A, 10mV/A;
* Resolution: AC/DC: 1mA
* Accuracy: ±3.0%FS (50Hz/60Hz; 23°C±2°C)
* Linearity: ≤2.0%
* Phase error: ≤3°(50Hz/60Hz; 23°C±2°C)
* Power Consumption: ≤5mA
* Output method: Voltage sensing output
* Output connector: BNC plug
* Output line: 2-core shielded cable, length: 1.5 meters for BNC connector
* Detection method: Clamp CT, non-contact measurement
* Zero adjustment: Adjust ZERO key can be zero, eliminate the interference of geomagnetic field and external electric field
* Frequency response: AC: 45Hz ~ 400Hz; DC: 10Hz ~ 10kHz
* Wire position: The tested wire is in the center of the jaws
* Line voltage: below AC 600V circuit test
* Working environment: -10°C～50°C; 80%R below (-10°C～0°C and 40°C～50°C, the maximum increase of error is ±2%FS)
* Storage environment: -10°C～60°C; 70%Rh or less
* Insulation strength: AC3700V/rms (between core and shell)
* Suitable for safety regulations: IEC1010-1, IEC1010-2-032, Pollution Degree 2, CAT III (600V)
* Weight: 200g
* Size: Lx W x H: 215mm×65mm×34mm
* Power supply: 9V DC 6LR61 alkaline dry battery, （Battery not included in the package）continuous use for 100 hours, you can draw out the power cord as needed, external power supply, easy to work for a long time