Your cart is empty.
Your cart is empty.Product Description
AGuyWhoReads
Reviewed in the United States on March 9, 2025
With the stock unit I kept having unexplainable clogs every month or so. With this one I have not had a single one since. Had to purchase a spare unit so I could be ready for when the original one has an issue!
Ngraves1002
Reviewed in the United States on March 17, 2025
First off the head worked great. However I had another issue that promted me to remove it from my printer only to discover that 1 of the screws that holds the ceramic heater on had fallen out. Upon further inspection. The screws that hold the heater to the block are not long enough. Barely getting 2-3 threads in. One side ripped what little thread it could hold out. Highly recommend checking screw length. If they don't reach through the heat block and almost tough the center piece, replace them. Picture shows the screws that came with it. And the ones that shoukd have come with it. 10mm OAL vs 12m OAL
Artista3D
Reviewed in the United States on March 16, 2025
Con este nuevo tipo de hotend mejoró mucho la calidad de la impresión. Elimina también el pequeño tubo de teflón azul que cuando se cristaliza, genera muchos atascos.
DD
Reviewed in Canada on March 15, 2025
Worked as expected. Easy to install. No Issues. Highly recommend. Just be sure you are replacing like to like hotends.
Customer
Reviewed in the United States on January 21, 2025
This model has the 2 plugs that are needed to be an exact drop in replacement for the original.The heat sink is black vs being silver but other then that it's perfect.MAKE SURE TO TIGHTEN THE NOZZLE AFTER YOU PUT THIS IN!!!!This comes with the .4 installed.This comes with step by step instructions that are very clear (small print though)
Vicki Lingle
Reviewed in the United States on January 21, 2025
Heated up nicely. Good price, easy to install.
Adam
Reviewed in the United States on April 3, 2025
Purchased in September. Thermistor crapped out mid print today, 6 months later. This is the second Creality Thermistor that failed. Next printer will be a Bambu, because the only thing worse than Creality parts is Creality support.Also, what they don't tell you is that the K1/K1 Max nozzles HAVE to be replaced, since this hotend uses the unicorn nozzles.
Dan
Reviewed in the United States on April 16, 2025
Works like it should💪
Customer
Reviewed in the United States on April 13, 2025
My factory hot tip for the K1SE died, bought this as a replacement. Installed, works and is compatible but you have to clip the molding on one of the plastic PCB connectors to make it fit. It uses a different type of lock fitting from factory. Few companies include K1SE in compatibility lists even though 99% of consumables are compatible.
Paul Morse
Reviewed in Canada on April 11, 2025
My K1 has the old style hot end with a billion screws that strip easy and heated inconsistently. It finally has a death clog that i couldnt fix and in my frustration i decided to just buy this updated hot end along with the new extruder. The difference night and day! my prints now print properly with a more consistent flow and significantly better adhesion. the fact that this is now a unicorn style is also much better. Would recommend to anyone with the only style hot end to just go ahead and upgrade its worth it!
Aldo Arcadio Marcos Hernández
Reviewed in Mexico on September 12, 2024
No dio problemas en la instalación y actualmente trabaja con normalidad
amy
Reviewed in Canada on May 23, 2024
Works exactly as it's supposed to, but more impressively, came early the afternoon after I ordered it. (I ordered at night). My printer was only down for a few hours as a result.
Mr G.
Reviewed in the United Kingdom on May 19, 2024
Needed a replacement as mine started to throw temp errors. This was the only one in stock I could find and considering it came from USA, very pleased with delivery. Plugged in and back up and running.
Recommended Products