Your cart is empty.
Your cart is empty.Product Description
Inlet
Connect with 10AN Male Inlet Adapter.
It is recomand to used a filter at inlet of pump.
Outlet
Connect with 6AN Male Inlet Adapter or Outlet Check Valve as you need.
Red is positive and blue is negative, please wire them correctly.
Come With Necessary Assembly Kits
Package Content:
- 300LPH External Fuel Pump ×1, Mounting Clamp ×1, Bolt For Bracket ×1，
- Rubber Connection Cover ×2, insulated terminals ×2 , Nuts ×2, Gasket ×2,
- Outlet Check Valve ×1, 6AN Male Outlet Adapter ×1, 10AN Male Inlet Adapter ×1
300LPH Fuel Pump
CarBole Inline Fuel Pump
Black | Color | Black |
75PSI | Max Pressure | 4-7 PSI |
300LPH | Max Flow Rate | 30 GPH |
Gasoline/Diesel | For Gasoline/Diesel | Gasoline/Diesel |
Black | Color | Red |
75PSI | Max Pressure | 75PSI |
300LPH | Max Flow Rate | 300LPH |
Gasoline/Diesel | For Gasoline/Diesel | Gasoline/Diesel |
Black | Color | Red |
75PSI | Max Pressure | 116 PSI |
300LPH | Max Flow Rate | 255LPH |
Gasoline/Diesel | For Gasoline/Diesel | Gasoline/Diesel |
Black | Color | Black |
75PSI | Max Pressure | 116 PSI |
300LPH | Max Flow Rate | 255LPH |
Gasoline/Diesel | For Gasoline/Diesel | Gasoline/Diesel |
- 12V FuelTransfer Pump Kit
- 300LPH Fuel Pump
- 255LPH Fuel Pump
- 255LPH Fuel Pump
JAMJAM
Reviewed in the United States on April 7, 2025
The tapped fittings are off sized, not constructed very well, have in a return for my purchase
Michelle Humphrey
Reviewed in the United States on April 5, 2025
Put this on our 2003 Nissan Xterra when we swapped out the gas tank and it works great. The fit is great, it sounds nice and has good pumping capacity. Overall, it’s a good value for the cost.
Customer
Reviewed in the United States on August 22, 2024
Fast service and looks like a good part
Louis
Reviewed in the United States on August 14, 2024
The pump comes with fittings that are for a limited application profile. Auto builders use a variety of different types of fittings, not just a couple of them. There are no indications of what size fittings the pump uses either, except that you can measure what is included with the pump. Another thing is there is no directional flow indicator on the pump, and no indication of where the in and out flow fittings are. There’s a nylon screen inside the pump that is normally used on the flow-in side, because why would you need to filter the gas going out of the pump? It includes a warning about not using dirty fuel, or allowing it to run dry for more than one minute. It uses metric sizes, not standard American. The electric connections are clearly indicated, and it comes with a nice bracket, but I used my own 10mm tightening screw, not the torx head one included. It’s just been installed. I wish I could leave a review in 12 months after some use and tell you if it’s worth the price.
Cash
Reviewed in the United States on December 4, 2024
Good pump for volume, flow, cost, etcIncluded bracket is nice and sturdy.Small notations on what goes where included but most of it you'll need to look at product pictures on the webpage to be certain.There's only one included inlet fitting and its a much larger size (on both sets of threads) than the outlet; while this is cool for ensuring constant priming, it makes it seem a little lacking without other inlet fitting sizes included since not everyone is goign to run an AN8 setup from there tank, and something different post pump size wise.
Raul jeysson Montenegro molina
Reviewed in the United States on December 26, 2024
Gracias
john92691
Reviewed in the United States on December 2, 2024
Arrive on time and exactly what I orders. Upgraded my 1972 El Camino and needed to high preasure fuel pump system. Installed easily and quickly. Been running for the past month with no issues. Good price and plan to buy again when I upgrade anther car (hoping to find a 1969 Camaro at a good price)
Secretcitynative
Reviewed in the United States on October 23, 2024
I put it inline after the pump inside the tank failed. It works great—better than dropping a full gas tank to put in a new pump. The pressure is right for injectors.
Recommended Products