At 1st I was skeptical and really Payed attention to installation using extra grease and under torquing to prevent stripping but really had no issue. Built pretty solid and I’m impressed so far. Trek hardtail marlin looks extra clean and a blast to ride. Brings the ability to wanna push without frontal derailleur jumping or problems. Oval shape looks awesome too! Great value so we see In time. 👍👍♥️🤙🤙

bottom bracket and cranks for a good price. Upgraded an old 2005 hard rock to a 1x. Easy peasy.

Fit and finish is good. Install was easy, but no instructions. Plenty of videos to assist. Have held up great after many rough miles.

The BB is nice and smooth and easy to install. And the oval shaped chain ring is a game changer for power delivery to the pedals. Only tip I have, is use extra locktite on the main two bolts when installing and get a heck bit for a ratched or screw driver and put em on really good. I wouldn't trust my life on a hand tight allen wrench with those bolts. Put on good though that have lastes through some gnarly trails w no issue.

As a value product, it's good but the weight is off-putting. Unfortunately, it did not fit my bike.

This product does not compare to the other brands like Shimano or SRAM. After 3 months, I started to have problems with the crank coming off as the metal that holds it together started to peel. Does not help when it comes with a plastic crank cover.

I want to start out by saying this is NOT a vine product review I paid for this item with my own money so my opinion is very much my own and not influenced in any way. That being said I’m very happy with this purchase. I wanted to change the BB on my 2003 Trek 8000 Xl it’s 20 years old after all and originally had the ISIS Drive and I wanted to go to a 1x drivetrain. I wanted to change to the Hollowtech style and this option is all over YT (just search for “1x drivetrain conversion and you’re GOING to see this product) it’s seemingly the go to option for budget drivetrain conversions. So it already has the clout and is trusted by a large group of people so it was the obvious choice for my needs. Price was really great I could have spent twice this amount just on chainrings alone. Quality seems great, again, this product is well known as a great option so it’s tried and true. Everything was in perfect condition and well packaged upon delivery no scratches or dings to be found. I went with the 32t option and my rear cassette is a 9 speed (to be upgraded soon). Perhaps my baby isn’t your cup of tea BUT I love my bike and in my opinion this crankset looks amazing on it. The red looks so good (I have jockey wheels on the way to match now haha) it’s bright vibrant and nice and shiny. The bottom bracket was an absolute breeze to install, unfortunately the item didn’t come with any directions, however if you’re doing this conversion chances are like me you’ve watched a hundred videos on it and it’s all so simple and straightforward you won’t have many issues. Just be sure you’re looking at the cups for their markings each side is clearly labeled as r or l and even the direction you screw it in is labeled so you can’t easily mess this up. Make sure and grease it all up really well (I suggest the park tools grease available here on Amazon!) The crankset itself was much of the same it’s a no brainer, grease up that axle and push it through BUT be aware the non drive side has a cap that can be pushed out so keep your hand on it as you slide the axle through the drive side. But no fears because even if you know you need to do it and do it anyway like I did it’ll pop right back in. When installing the crank arms there are two set screws treat them like you were putting a wheel on your car, tighten one then tighten the other then repeat the process a few times until both are as tight as they can be (use a torque wrench for best results) and make sure and grease those splines! Install your pedals and you’re done that’s all there is to it! I didn’t use the plastic pedals it came with as those are a known weakness of this crankset but they are serviceable if choose to do so but I had some hapleby mtb flat pedals (also available here on Amazon) laying around so I installed those instead. The entire process from start to finish (I already had my old crankset removed) took less than an hour and I was back on the road. As I’ve said, this exact crankset is well tested and documented online, it’s the go to option for a cheap 1x setup and you’ll need that narrow wide chainring to aid in no chain dropping. I used one of the included spacers and got a perfect chain line so that’s another aspect you’ll want to research. All in all I’m extremely happy with this purchase, it looks great was easy to install and seems built like a tank. If you’re looking to do a 1x conversion without busting the bank THIS is your best option. Shipping was fast with no hassle as well. You really can’t go wrong here just do your due diligence beforehand make sure you have all the right tools (all available here on Amazon) and you’re good to go. So satisfied with this purchase and I think you will be too. I’ve rode about 30 miles so far on this now and it’s like a new bike.

This is a good crankset. I wanted to address the bottom bracket issue I experienced. The crank shaft going through the left side bearing cup of bottom bracket was very tight going on. First time pushing crank through the bottom bracket, it stopped on the left side bearing just a little way in. I took the bottom bracket back off and eventually worked the crank shaft through the left side by pushing it on, then taking back off, pushing back on. Repeated this for a few minutes and eventually the crank shaft went through the left side bearing cup. It has very tight tolerances on the left side. The right side went through from the beginning. The bottom bracket left side is just a tad small. It was still a little tight going in even after working on the left cup to open it up, so I used a rubber mallet and lightly tapped the right side of crank to fully seat. I didn't file or sand anything and used some grease. Everything works fine. The bottom bracket is usable, it just takes a little bit of work to get it seated. The company who makes this bottom bracket just needs to look at the cups and make sure the cups are clearing the crankshaft. This is a good product. Just a very minor tweak will make it even better.