Your cart is empty.
Your cart is empty.Product Description
Features
●Individually Addressable
Using a programmable controller and you can program every led just you like. Every one led has its own IC chip.one IC controll one led.The chip buil in led.
●Mini Leds
Mini Leds 2427, Lower energy consumption. No voltage drops. The same size with more pixels.
●DIY
If you have a programmable controller , you can DIY your own special effects
●Bright
Brightness can be adjusted freely.Do not stare at it for a long time, otherwise you will be dazzled when the led Brightness is the brightest.
●Colorful
Red ,Green, Blue .Dream full color. curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software/K-1000C
●Long life
Life span:more than 50000hrs
Specifications
- Power: 50W
- Gray level: 256
- FPCB colors: black
- Plate: soft copper
- Beam Angle: 120 °
- Light source: SMD 2427 Mini RGB
- Working Life: >50,000 hours
- LED Quantity: 22X22 484 Pixels
- Emitting Color: Full color (24-bit)
- Standard operating voltage: DC 5V
- Waterproof: IP30 non- waterproof
- Working temperature:-20°C~40°C
- Model: WS2812B 22x22 LED Matrix panel
- IC: WS2812B (WS2811 IC built-in RGB chip)
- FPCB board size: Length 16cm Width/16cm, Thickness/0.3cm
Precautions
●Do not bend sharply. It will make the leds loose and the poor connection. Flexible PCBs are not designed for repeated flexing!
●Using voltage 5V DC. higher than 5V DC will destroy it.
● If you want the data sheet of WS2812B Panel, please let us know, we will send it to your email.
●If you need better led strip performance, you can use a K-1000C controller or another programmable controller.
Jwish
Reviewed in the United States on December 27, 2024
I like these lights. Just wish they weren’t so expensive
Cliente
Reviewed in Italy on January 9, 2024
Fantastico
John Watson
Reviewed in the United States on July 14, 2022
The media could not be loaded.
BCN
Reviewed in the United States on July 1, 2021
I had some trouble getting this display going. Using an Arduino Mega and some sample code found online, I ended up with just 1 LED coming on. When I reached out to the manufacturer, they were responsive and offered a wiring diagram to assist. They also mentioned that 1 LED lit often means no data connection. I verified solid connections and when that still didn’t work, the manufacturer offered to send a remote controller to use for testing. It was then that I realized I had switched data with ground. Duh. If only I looked at that after the support engineer mentioned it... Once I made the proper connection the unit worked well. Bright, rich colors. This is my first experience with an LED matrix, but if need to by another, I wouldn’t hesitate to purchase this one again.TL;DR:Good customer serviceNice matrix displayWould buy again
Abu Hashem
Reviewed in the United Arab Emirates on June 23, 2021
Not working.
Just Electronics
Reviewed in the United States on May 1, 2019
The media could not be loaded.
ThomasBender
Reviewed in the United States on December 15, 2019
My guess is that these things have been sitting around for too long and maybe just went bad after being exposed to probably too much heat or something. I got one and only about 2/3rds of the LEDs would light up, they also wouldn't respond to the Arduino code correctly. The code works fine on other WS2812B LEDs so whatever maybe just bad luck. I got a replacement shipped to me and this time they all do light up, however again they don't respond correctly and just seem to do their own thing. I checked my code again and used a bunch of random code(specifically for these kinds of matrixes) off the internet that also doesn't work with this thing. But guess what? The code works just fine with my other WS2812B LEDs. Either the posting here is wrong or there is a pretty bad QC issue with these things nowadays. Now I have 2 pieces of garbage that I need to ship back on my own time before I can even get a refund. Fun.Don't buy, there's plenty of other postings for the same thing on Amazon, so don't order these. Bad quality control.
David S.
Reviewed in the United States on April 22, 2019
I bought this about a year ago for a project and although I never finished the project, the 44 x 11 LED array worked great!It's very bright, easy to connect up to any WS2812-compatible controller (or Arduino). I used mine with an Advatek PixLite controller. I plan to purchase more of these arrays to build a larger sign as the only down-side to this array is the size. For my application, I wish the LEDs were spaced further apart and the overall array was larger.Cost is a little high, but if you're in need of more than a couple you should be buying in bulk from China
Bob
Reviewed in the United States on May 7, 2018
This is a 5 star display but I subtracted one star to the lack of documentation.This display has rich colors and works well with the FastLED library. The package arrived per the suppliers commitment and was well packed. I did see some flicker but at this time I'm attributing it to my power supply. I'm getting a 1000 uf lytic to reduce the demand on the supply. I found out that the flickering was due to my driver. I switched to an Arduino UNO and everything worked great. I'm impressed with the brightness. I dimmed it down and it still supplied plenty of light. A quick connector was supplied which made it easy to interface it to the supply and the data source.Opportunities are as follows. I didn't receive any documentation and when I went to the site the product wasn't listed. I'm still confused on why there are two wires in the center of the matrix labeled 5v and DIN. I can see having the power coming in at the center but why the data also. I assume there was a reason but without any information I didn't use it.
Julien
Reviewed in France on February 13, 2018
Bonne luminosité voir trop au MAX bonne couleur et niveau réaction très fluide!Avantage sur ce model elle à plus de pixel pour le rendu des images!
Darren Connolly
Reviewed in the United Kingdom on April 10, 2018
This is a great panel. I'm still learning how to use it tho. It is very bright.
Karsten Geißler
Reviewed in Germany on September 3, 2017
Der eigentliche Artikel gefällt mir gut und hat auch eine schöne leuchtkraft leicht anzuschliessen an einen Led Player oder Microcontroller .Jedoch denke ich durch die fexibilität des Planels falöen die Leds schnell aus.Ich habe von anfang an ein defektes Planel bekommen jedoch der Service ist super schnell und angenehm.
D. Woodall
Reviewed in the United States on June 26, 2017
This is a good panel at a good price. I ordered two at $37.88 each, and tested them first thing to make sure there were no dead pixels. Both panels work flawlessly. Color rendering is good, and is consistent across the panel. Each panel was in a nice white box, but I was surprised that instead of being placed in an ESD protective anti-stat bag, the panels were wrapped in bubble wrap, known for holding static charge. My only issue is that the advertised size is incorrect - they are not 0.48ft by 0.48ft. They measure 6 5/16 inches (square), which is 0.53ft. Your enclosure needs to be at least 6 3/8' inside measurement. If I had built my enclosures relying on the 0.48ft description I would've been rather angry because the panels will not fit inside a 6" square hole. WS2812 LEDs get a little warm when holding a bright color over time and this panel does as well, since the LEDs are closely spaced. You need to give them good ventilation.For those reviewers whining about the serpentine addressing - this is the most efficient way to connect the rows (or columns). Build your own panel and you'll see. There is a simple solution - simply create a 2D ([rows][cols]) map that converts a logical row+column position into the corresponding physical position in the panel.
Recommended Products