Your cart is empty.
Your cart is empty.Product Description
Product Parameters
- Product Name: 4 Zone RGB , RGBW and RGBCCT Panel Remote Controller.
- Model No: WR01RF
- Working Voltage: 3V (2*AAA Battery) (Package Not Including Battery )
- Transmitting: 6dBm
- Standby Power: 20uA
- Transmission Frequency: 2.4GHz
- Modulation Method: GFSK
- Control Distance: 30cm (98.42ft)
- Working Temperature: -20-60°C
- Size: 86*86*19mm (33.86*33.86*7.5in)
- Support Controller：C03RF,C04RF,C05RF,C03W,C04W,C05W,WB5,LM052,LM053.
Link / Unlink
Link Instructions:
- Disconnect the LED controller from the power supply for 10 seconds and reconnect it.
- When the light on, short press any zone of " — " 3 times within 3 seconds.
- The LED Strip blink 3 times slowly means the linking is successful.
Note：Linking failed if light is not blinking slowly , Please follow above steps again( Note : Light that have linked cant link again).
Unlinking Instructions:
- Disconnect the LED controller from the power supply for 10 seconds and reconnect it.
- When the light is on , short press the been connected “—" zone 5 times within 3 seconds. (Unlinking must be the same zone with the Linking)
- The LED strip blinks 10 times quickly means the unlinking is successful.
Note：Unlinking failed if light is not blinking quickly , Please follow above steps again( Note : Light haven't linked that don't need to unlink).
Attention:
- Please check the cable, and make the circuit is correct before when power on.
- When installation, please handle with the care to avoid the broken of the glass panel.
- Please don't use the lighting fixtures around the mental area and high magnetic field, otherwise, it will badly affect the control distance.
Jason and Christy Jo
Reviewed in the United States on March 14, 2025
Works great to power my under cabinet strip lights. Have purchased two more since.
KE
Reviewed in the United States on March 10, 2025
This LED controller was so easy to get up and running.Very well engineered! I’m am an Electrical Engineer…
Dano
Reviewed in the United States on February 8, 2025
I just can’t keep this thing connected to my Zigbee hub (or any other hub). I bought a dedicated hub in hopes that this thing would connect. You fiddle and fiddle with it and try and try and then one day it’ll connect amazing everything works… then the next day all is forgotten. I wish I returned this when I could have. Now I need to find a more reliable controller.
Ulf Zimmermann
Reviewed in the United States on February 28, 2025
While the controller works well, both I have of this particular model make electrical noises when at around 75% to 100% of power. If is is over a meter away it is probably not audible but it is still annoying.
Kenny
Reviewed in Germany on February 12, 2025
Einfache Einbindung in die App, alle Funktionen wie beschrieben.
Fenton P.
Reviewed in the United Kingdom on January 11, 2025
Easy to install and setup. Impressive control of lights.
Sandro
Reviewed in Italy on December 24, 2024
Mi sono scelto questi controller da abbinare a strisce LED e illuminare la sala in casa, il bagno e la cucina, non potrei essere più contento.Installati a valle di uno smart switch per avere un controllo completo di luce onoff dall'altro e questi "solo" per dimmerare e cambiare la luce.Facendo così ho speso qualche euro in più ma sono al 100% funzionanti sempre per le mie necessità e se vai a comprarli da chi fa "smart home" o "domotica" ci spendi 40€ a interruttore, nemmeno punto luce...qui con 1/5 fai un punto luce, siamo su due pianeti diversi.Funzionano sempre, si installano da soli in 1 minuto e si configurano in un attimo, pure con Alexa e le skill...insomma, se uno ha un minimo la voglia di metterci mano fa tutto da solo, spende niente e se la gode a livelli inimmaginabili.
miami v.
Reviewed in the United States on July 31, 2023
I encountered no issues pairing the Controller with the TUYA app to run my LED light strip (Model: RGBW5050-60). Furthermore, I was able to schedule ON/OFF times for my light strip, which is what I was really looking for. The color wheel color selected to the color output was decent. I haven't tried the music function, Alexa, Google Home or SmartThings. I'm keeping my fingers crossed that this controller has decent longevity. Minor complaint is it that it says on the label: WiFi & BT. I haven't seen how to access the Bluetooth option.
Customer
Reviewed in the United States on May 4, 2023
Works great! But, the linking instructions shown in the product description are incorrect!After trying those instructions multiple times and failing every time, I tried a procedure listed in an answer from btf-lighting support about syncing the miboxer version to a FUT036W controller and they worked!These are the correct steps to sync the BTF-LIGHTING WR02RF Wireless remote to BTF-LIGHTING 5in1 WB5.1. Unplug the power supply feeding the WB5 controller. This step is required.2. Wait 10 seconds3. Plug the power supply back in.4. After the lights come back on, press the DASH symbol on the appropriate zone (1,2,3,4) - key 3 times.5. After the third press the LED strip will blink slowly 3 times then stop blinking. The LED light strip will be lit.To sync additional WB5 controllers to the WR02RF simply repeat the process for each controller, selecting appropriate zone number.Enjoy your lighting!If anyone is interested these are the products I used to install under cabinet lighting in our recently remodeled kitchen.1 each - BTF-LIGHTING FCOB COB CCT Flexible High Density LED Strip - Search ASIN# B08Q3RKCZH2 each - BTF-LIGHTING 5in1 WB5 2.4GHz WiFi LED Controller - Search ASIN# B08L9GWJK11 each - BTF-LIGHTING WR02RF Wireless 2.4G RF 4 Zone Remote - Search ASIN# B096VM7JV62 each - BTF-LIGHTING 24V 5A 120W Power Supply - Search ASIN# B0BNQ5W2BH1 each - Muzata 6PACK 3.3FT/1M Flexible Silver LED Channel - Search ASIN# B07P7NYSQ7
Fernando Pérez
Reviewed in Mexico on April 18, 2023
Hasta ahora funciona perfectamente, llegó muy bien empacado deberia de venir con su Transformador ya que es dificl encontrar uno que se ajuste a la entrada.Muy buen producto, hace un pequeño zumbido cuando la luz esta funcionando con dimmer y puede llegar a ser molesto despues de un rato.
Marat Kulakhmetov
Reviewed in the United States on September 1, 2022
When it works, it works great, but often they stop working. The app is easy to use, it connects to Google Home and it drives LED lights just like expected. However I had to go through 3 of these boxes before I got them working. The first worked for 5 min and then stopped connecting online. The second worked while I had one LED strip but when I unplugged it and moved the strip it would only controll my rgbww strip as if it was only an rgb strip. The third also worked great for a day but then when I unplugged and replugged the strips it stoped recognizing my rgbww strip and treated it as an rgbw strip. Now that my led peoject is finished and I don't need to unplug the LEDs anymore, the 4th controller is working great. In all the previous failures, I never exceeded the amp limit or short circuited anything. In general these seem to work great but they are not robust and go out if you look at them weird. Plan to buy 2x the number you need for your project and retuning half of them because they will break. Thankfully, Amazon makes returns really easy
miguel roncero
Reviewed in Spain on December 12, 2022
Pedazo receptor, manejo desde mando y desde móvil, configuración sencilla, buen alcance. Dimea las luces y cambia de intensidad (de2700k a 6500k). Muy recomendado.
DC
Reviewed in the United States on January 15, 2022
Check out my other reviews and you'll see that I am objective and only praise truly awesome products. These are clearly designed carefully, with quality being a top priority. I've used several other control modules, some monochrome, some multi-color, some basic on/off switches others like this one, are truly versatile. The WB5 is a redesigned WL5, BTF replaced the screw terminals with spring locking clips. This change alleviates the need to re-torque screw terminals anytime the module or connected wires are moved. The previously purchased dimming control modules melted down when put under any stress. The other manufacturers seem always to over-state the amperage/wattage ratings. This controller will meet the design criteria and likely beyond, (I'm not suggesting over driving them.) The terminals are rated at 6 amps each, but the maximum module rating is 15 amps. I installed two of these control modules in a 180-watt light fixture with 90 watts cool white and 90 watts warm white SMD5630 LED strips, (84 LED bulbs per strip.)In my experience, mixing the color ratings usually results in errors and routine melt downs. But these BTF-Lighting control modules are designed to control pretty much any combination of mono chrome or RGB colored LEDs. I'm learning by doing and assembling my fixtures with the best value components that I can afford. I'd resigned myself to using a modular connectorized controller, rated at 96 watts, to control separate 45-watt banks of SMD5630 LED strips. But after suffering 4 separate melt downs, I looked for and found these BTF-Lighting Modules.I can't say enough about the awesome technical support that BTF-Lighting provided via email. Their patience and persistence in helping me find the correct wiring scheme and setup has been exemplary.I've ordered a set of FUTO36W monochrome control modules offered by BTF-Lighting, as well and I promise I'll carefully test and review that control module, as well. I am proud to be a customer of BTF-Lighting and I can't thank them enough or say enough about how kind and genuine the support team has been.Thanks for reading!DJC
Recommended Products
$49.98
$ 22 .99 $22.99