Your cart is empty.
Your cart is empty.Specifications: ATR-4053 Nominal Diameter: 4" x 4" / 102mm x 102mm Nominal Impedance: 4-8 Ohms RMS Power Handling: 200 Watts MAX Power Handling: 400 Watts Sensitivity (lw/lm): 107 dB Frequency Response: 3000Hz-22KHz Pair or Single: Single / Individual Voice Coil Diameter: 1.5" / 38mm Voice Coil Former Material: Kapton Winding Material: CCAW Diaphragm Material: Aluminum Magnet Material: Ferrite Dimensions: Overall Diameter: 4"/ 102mm Overall Depth: 2.6" / 66mm Front Mount Baffle Cutout: (Cut Hole) 3.6" / 92mm Mounting Depth: 2.2" / 55mm Motor Diameter: 3.5" / 90mm INSTALLATION INSTRUCTIONS If you purchased a Crossover Network for your woofer, Midrange or Tweeter system, you do not need to connect a condenser. If your system does not include a Crossover Network, you must connect a capacitor as follows: 1. Connect either end of the capacitor to the positive terminal (+) of speaker. 2. Connect other end of the capacitor to the speaker wire harness; be certain to connect to the positive side of the harness, which is the radio output (+) side. 3. To get better sound performance, it is recommended to use capacitor 1.5μF/250V for this unit.