Your cart is empty.
Your cart is empty.Product Description
The NEW Standard in Septic Riser Kit Safety
All of our kits include the secondary safety barrier at no additional cost. Why is this important? The patent pending Septic Riser Adapter Flange with Integral Safety Barrier provides added protection from an incidental security breach of the primary septic riser cover. Our Septic Riser Safety Barrier provides piece of mind.
Stop the “search and dig” exercise!
If you have questions about which size will work in your application or have any installation questions please let us know before you purchase. We’ll confirm the correct model is selected as ordering the wrong model can be unsatisfying and costly. AS Series Septic Tank Riser Kits are not compatible with Norwesco branded tanks & most poly tanks without modifications to tank. This riser kit requires a flat surface at least 24 inches to 28 inches in diameter to attach the adapter flange.
- Used to raise tank opening to ground level for easy maintenance
- Installation Ready – No Field Cutting Required
- Includes all hardware and sealants
- Low profile cover
- Plastic adapter ring is 30.25 in. x 30.25 in. with a 23.5 in. riser ring inner diameter
- Fits all opening shapes e.g. round, square, rectangular, etc. up to 24in.
Our Septic Riser kits are complete and ready to install!
Low Profile Septic Riser Cover
- Low profile cover adds only 1/2″ to the riser
- Green structural foam HDPE
- Four (4) Stainless Steel Square Bit Screws attach Cover to Riser Ring
- Compressible rubber gasket
- Virtually flush with the lawn
- Easier mowing and maintenance
Septic Riser Pipe
- Manufactured from durable HDPE. This material won’t degrade and crumble like concrete riser pipe.
- Double-walled corrugated with 23.5 ID smooth inner.
Septic Riser Adapter Flange with Secondary Safety Barrier
- Provides additional safety barrier below the septic riser cover
- Tank can be pumped without removal
- Removable for servicing baffles
- Fits all opening shapes e.g. round, square, rectangular, etc.
- Made of Recycled HDPE
Sheri
Reviewed in the United States on February 14, 2025
Will be so much easier for my septic tank to get cleaned out optimally. Easy to remove lid when needed.
S. Labo
Reviewed in the United States on August 30, 2024
assembly was extremely easy. Was able to easily drill through side for electrical conduit to pass through. Ribs are hollow and drilling a 1" hole for conduit exposed it. Filled with expanding foam and sealed with silicone caulk.
Eric Shannon
Reviewed in the United States on May 9, 2024
Lid, riser and fall prevention device all high quality. The base comes in four pieces that snap together really easily and it works fine but I feel like it you be a little better if it was one solid piece. That being said it all went together great and seemed really solid. I had a square opening and there was plenty of butyl tape. I'm really happy with the product and the ease of installation. I would definitely recommend this product.
Customer
Reviewed in the United States on October 12, 2024
Timely delivery and solid product. Easy to install!
Richard
Reviewed in the United States on August 5, 2020
Easy to install.. looks good. Will save much digging later when pumping is needed. Very well built.
Steve Canyon
Reviewed in the United States on June 18, 2020
400 bucks for this is pricey ,200 each end . I had my septic pumped just before I installed them and the Septic guys said " Should have called us first we do risers using your concrete lids for 100 bucks a side . So while it would have saved me 200 bucks it wasn't the " Look " I was going for . These look very nice and once the grass grows back around them I will be pleased . would I do it again ? Yes .
Douglas C Schott
Reviewed in the United States on October 8, 2020
I am pleased with the overall quality and construction of the materials. The provided butyl is thick and I did not have an issue with sealing. I did, however, purchase thinner butyl tape to fit into the lip around the edges of the flange for a second, outer seal.I was surprised that a 5/32 concrete drill bit was not included. Every box of concrete fasteners I have ever bought included one. So make sure you have one.I was not pleased with the method for attaching the flange to the riser, which required screwing the two together. I found that the tabs on the flange where the screw drives through don't appear to be stout enough. I had a couple of screws strip out the plastic where they fastened to the riser and some tabs deformed when the screws were driven. This happens because there is about a 1/2" gap between the tabs in the flange and the inner surface of the riser where the two parts need to be fastened. When the screws are driven, the plastic tabs are pulled under tension and the plastic does not seem durable enough to handle the tension properly. I recommend driving the screws with care.
Dooogaaan
Reviewed in the United States on February 3, 2019
All parts were perfect but buy your own tapcon screws. Theirs snapped (drilled concrete holes correctly). Because edges might not be perfectly flat I ran a thick bead of liquid nail around edges and caulked exposed screw heads that weren’t stainless steel (tapcon heads). Very happy with my choice.
Recommended Products