Your cart is empty.
Your cart is empty.Product Description
ASNOMY Micro Grain Carbide End Mill
Feature:
1) End Mill Bits are used for side milling, end milling, finish machining, etc.
2) Compatible with Engraving Machine, CNC Production Center, Milling Machine, CNC Milling Machine.
Specifications:
Product Name: AlTiN Coated End Mill Bit
Material: HRC55 Carbide with AlTiN Coated
Flute: 4 Flute End Mill Bit
Cutting Diameter: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm;
Package：
8pcs Carbide End Mill Set
Operation Warm Tips：
1) A high-precision, balanced and stable tool holder must be used;
2) The shorter the length of the milling cutter protruding from the chuck, the better. When the milling cutter protrudes longer, please reduce the rotation speed, feed rate or cutting amount;
3) If abnormal vibration or noise occurs during cutting, please reduce the spindle speed and cutting amount until the situation improves;
4) When the milling cutter is processing steel, the cold cutting method is recommended to use spray or air jet, and it is recommended to use non-water-soluble cutting fluid for processing stainless steel, titanium alloy or heat-resistant alloy;
Why ASNOMY's Carbide End Mill Would be your Best Choices?
Four Flute End Mill
Mainly for Side Milling and Face Milling
Double Blade Design
Strengthen the hardness of the cutting edge, make the cutting sharper
Fully Grinding Spiral Groove
Avoid sticking to the edge, and chip evacuation more smoothly
Ruesterholz Anne Marie
Reviewed in France on February 11, 2025
Article de bonne qualité, parfaitement adapté pour les petits bricolages.
RadioJohn
Reviewed in the United States on February 28, 2024
I generally purchase machine tools from US sources; this time I needed a metric sized mill bit for one cut on a quick turn project. So I thought I'd find an inexpensive bit set as a one off.I haven't found (quickly) any info about "Asnomy".I anticipated these would be Chinese made, instead they are marked, "Germany".Quite sharp, made the cut well in aluminum, and showed no wear on the tool (no surprise).
driton Bajraktari
Reviewed in Germany on December 28, 2024
Schell geliefert
DARTOIS E.
Reviewed in Belgium on December 25, 2024
superfait au top
Peter Franking
Reviewed in Sweden on February 21, 2023
I have only used the 10, 12 and 5mm. The bigger ones has been used for more than 5 hours each (on thick iron) and seems still very good. The 5mm melted down after (Used approx 5 min with break after 5 minutes).I have not used any refrigerant or lubricant but very low speed.Recommend the thicker ones ...
Erik Smith
Reviewed in the United States on February 2, 2023
Worked as intended, just be patient and work slowly & keep steady. Prefer to use with a fixed machine like a drill press not handheld drill.I used both and worked great.
Paolo
Reviewed in Italy on December 23, 2023
Ottime frese molto taglienti. Usate su acciaio svolgono bene il loro lavoro. Finitura buona del taglio.
Studio 44
Reviewed in the United States on August 12, 2022
have not had a chance to use them yet but they seem to be good quality, I look forward to trying them out.
Luis Mejia
Reviewed in the United States on July 28, 2022
Recomendables para trabajos en metales duros! muy satisfecho con el producto...
José Luis Mora Herrera
Reviewed in the United States on March 26, 2022
Buena calidad a muy buen precio 👍
Recommended Products