Your cart is empty.
Your cart is empty.Product Description
High thermal conductivity
The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission.
Easy application
Thanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers.
Secure usage
In contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal.
100 % original through Authenticity Check
To ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes.
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 x 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
حاتم عباس الاحمد
Reviewed in Egypt on February 23, 2025
منتج اصلي
newa
Reviewed in France on February 13, 2025
Très très bonne pâte thermique pour faciliter le refroidissement, l'ayant utilisé sur un 2600x avec un Wraith Spire de chez AMD, et sur un Watercooling Antec 360mm avec un I5 14600k.
Sergii
Reviewed in Poland on February 11, 2025
Super pasta!
AP
Reviewed in the United States on January 29, 2025
Not I have your attention I could say buy it! Great temperature control with this artic, I used others but naah, cost same than others and not much but 1-4c ;93 this high grade thermal paste
Martin
Reviewed in the United States on January 13, 2025
I've had multiple thermal pastes from various companies. This one was great. Amazing Temps is not all runny like most. Best bang for your buck. For the amount you get at this price it's amazing. I've spent more or the same on les grams from companies like corsair.
Broke Tech Lover
Reviewed in the United States on January 1, 2025
I needed more paste to use in a couple laptops that need repasting so getting more paste for less money is great
Brian W Brombacher
Reviewed in the United States on July 23, 2024
It came fast. It was extremely easy to apply and seems to be working perfectly
RTG&T
Reviewed in the United States on December 16, 2024
I use a lot of thermal paste in my job and I have always used Arctic Silver 5 with good success. I decided to try this brand and see how it works. So far, it seems to works as well. The price is a lot lower so if it performs well over time, this would be a good way to go.
Sami Mehmeti
Reviewed in Belgium on November 27, 2024
ok .Merci, vous êtes rapide, parfait
Jim Cady
Reviewed in the United States on October 31, 2024
German company, but manufactured in China. Worked OK, but seemed to be slightly dry.
Jörg Henninges
Reviewed in Germany on April 21, 2024
Als langjähriger PC-Enthusiast weiß ich, wie wichtig eine zuverlässige Wärmeleitpaste für die Kühlung meiner CPU und GPU ist. Die ARCTIC MX-4 Wärmeleitpaste hat sich über die Jahre als verlässlicher Begleiter bewiesen, und das aus gutem Grund.Die Verpackung mag sich im Laufe der Zeit verändert haben, aber eines ist konstant geblieben: die herausragende Qualität und Leistung dieser Wärmeleitpaste. Ihre Formel, basierend auf Kohlenstoff-Mikropartikeln, garantiert eine extrem hohe Wärmeleitfähigkeit, die es ermöglicht, die Hitze von der CPU/GPU schnell und effizient abzuführen.Was die Anwendung betrifft, ist die ARCTIC MX-4 äußerst benutzerfreundlich. Selbst für Einsteiger ist sie dank ihrer Konsistenz leicht aufzutragen und eignet sich ideal für den Einsatz auf Chips. Ein weiterer Pluspunkt ist, dass sie metallfrei und nicht-elektrisch leitend ist, was die Anwendung noch sicherer macht.Um sicherzustellen, dass Sie ein Originalprodukt erhalten, bietet ARCTIC einen Authenticity Check an, mit dem die Echtheit jedes einzelnen Produkts überprüft werden kann. Dies ist ein weiterer Beweis für die Verpflichtung des Unternehmens zur Qualitätssicherung.Und schließlich bietet die ARCTIC MX-4 Wärmeleitpaste ein unschlagbares Preis-Leistungs-Verhältnis. Sie übertrifft sicherlich die Erwartungen, insbesondere für Systemintegratoren, die auf der Suche nach einer hochleistungsfähigen Wärmeleitpaste zu einem erschwinglichen Preis sind.Insgesamt kann ich die ARCTIC MX-4 Wärmeleitpaste allen PC-Enthusiasten wärmstens empfehlen. Sie ist eine bewährte Wahl für eine optimale Kühlleistung und Qualitätssicherheit.
RedXepher82
Reviewed in the United States on November 18, 2022
This is a pretty good thermal paste to have. It does have a good connection between the cooler and GPU/CPU. In terms of amount, you get a good amount to apply several different times. It does have a cap so you can cap it to prevent it from leaking. My only minor complaint is that it does not really stop applying even when you stop pressing the syringe. I have to tilt it upward to stop it. If I do not, then it just slowly leaks out. I wish there was some kind of spatula spreader with this to avoid waste and make it easier to spread the thermal paste. I actually just make due with the side of a q-tip. The paste spreads pretty evenly and does not create a mess. It does a good job with reducing the heat on my laptop gpu and cpu after I replaced the dried out old one. It actually improved the performance significantly. The cap provides a pretty good seal and you get a good amount of thermal paste. Overall this is a good performance thermal paste that does a great job with bridging the heatsink with the fan. It applies well and does not spill over or anything. It reduced the heat. The only thing is that I wish it did not continue to pour out even when I do not press the syringe. It is nice that there is a cap. Also I wish there was at least a spatula to help with application.
KeithL
Reviewed in the United States on August 16, 2020
OK SO I juts built 2 new Ryzen 9 3900X systems that I want air cooled becasue I don't want to fuss with water. I bought a Noctura NH-U14S and added a second fan to optimize cooling. I used the supplied paste and the temps were great, never going over 76C with all cores at 4.1GHz for over 15 mi. I wanted to try some other pastes and was looking at TG Kryo, but saw that as temps get to 80C it breaks down and then I as look deeper into the Noctura paste and saw that it would likely need replacing in ~3 years. Well my old server is running Artic Ceramique for over 5 years without any issues or change sin temps. Years ago I used Artic Silver then Artic Ceramique and decided I wanted a once and done application without having to worry about when I might need to reapply. I did both my server and my new workstation, both Ryzen 9 3900X same Noctura HSF. Well as good as many think the Noctura paste is MX4 is actually giving me a tad better results. Keep in mind nether system location is very cool, server ambient is around 76-79F(24.5-26C) and my workstations is often 74-76F(23.3-24.5) and with all cores at 4.1GHz over 30 min. the server never got above 167F(75C) and the workstation never got above 162F(72C) well within the limits of 95C for the CPU. Whiel many benchmarks say the MX4 is abotu neck and neck with the Noctura paste I actually am seeing 1-3C advantage on the Artic MX4. And the MX4 shoudl last 8 years without m having to reapply. This is really some excellent stuff. Also when I pulled the HSF the Noctura paste had 100% coverage so the application was fine. I did try a modified 5 dot method on the Ryzen 9. I did doe a small dot over where each CPU die is and the IO die then a smaller dot in center and 1 in from each corner assuring good coverage and especially where it matters, over the dies. Forget worrying about what benchmarks say, this stuff has been around a long time and works well and all Artic pastes have been excellent products. As long as you are well within the thermal limits of CPU go for an economical paste that will last and MX4 is it!
Recommended Products