Your cart is empty.
Your cart is empty.Product Description
Why should we replace the old AC compressor clutch?
The AC compressor serves the purpose of converting the low-pressure refrigerant into a high-pressure refrigerant and sends it to the condenser. It is the central component that maintains the pressure difference between the high-and low-pressure sides of the AC mechanism. Proper lubrication is essential to prevent the compressor from premature wear. A bad compressor, of course, will not send the refrigerant under the required pressure, thereby failing to provide optimal cooling to the vehicle.
How to install?
1. Always wear eye protection.
2. Remove the failed compressor. Transfer any switches, sensors, brackets, or manifolds from the original compressor to the replacement unit.
3. Thoroughly flush each component not being replaced with an approved AC flush solvent.
4. Replace the accumulator or dryer and all expansion devices. including the orifice tube and screen.
5. After installing the replacement compressor on the vehicle ensure proper mounting and belt alignment.
6. It is recommended to install an in-line filter in the suction line near the compressor inlet.
7. Add the proper type and amount of ac oil as per manufacturers procedures.
8. Apply a vacuum to the car ac system. A minimum of 29 inches of mercury for one hour to insure moisture and residual flushing solids or boiled from the system.
9. Recharge your air conditioning system using the recommended Freon.
10. After you finish your repairs, conduct a complete system performance test.
Caamal85
Reviewed in the United States on September 29, 2024
Great quality and the fitment was perfect and easy to install if you have the right tools
Customer
Reviewed in the United States on July 27, 2024
1hr after installation and driving started making noises a/c works but noise is off and on. Hopefully goes away! Not happy Junk!!!belt burned and part failed ended up getting car towed same day! Buy at own risk
Baha
Reviewed in the United States on June 7, 2024
Fit fine besides the new spacers wouldn’t allow the clutch to spin freely had to re use old ones and works good.
Customer
Reviewed in Canada on December 4, 2024
The media could not be loaded.
Jorge Luis Cruz
Reviewed in the United States on October 26, 2024
Hello, I bought this part for the air conditioning compressor in my car, they installed it, it has an electronic cut-out and it burns the fuses in my car and my car could end up on fire due to an electronic cut-out. I want to know what warranty I have for return it and they will refund my money to my credit card, I will return them broken or they will send me an identical one in perfect condition. thank you so much . Google translator
Michael Morosoff
Reviewed in the United States on August 8, 2023
Works absolutely perfect and was fairly easy to install. (Once I got the old one off. That was fairly difficult)A reputable shop told me this was a non-serviceable part and quoted me $850 to replace the compressor so this saved me almost $800 ($700 after buying snap ring pliers, large channel lock pliers, and a 3 jaw puller)
Customer
Reviewed in the United States on August 21, 2023
Installed on 2005 corolla xrs. Had issue fitment with the snap-on ring for the magnet, had to grind down a bit. Also, you dont need to use oem plug as this new one will plug right into the positive and replace the ground.
Eugenio
Reviewed in Mexico on August 17, 2023
Excelente producto y su entrega muy buena a tiempo y en buen estado
Alan E.
Reviewed in Mexico on May 4, 2023
Ya instalado y funcionando
Leonardo Rodriguez
Reviewed in Mexico on November 28, 2023
muy buena calidad
Luis
Reviewed in Mexico on January 1, 2023
Las.partes que giran funcionan pero estan desbalanceadas. Generan vibracion. Lo compre por la bobina. Funciona. Pero con ese detalle.
Jes
Reviewed in the United States on May 29, 2022
I bought this for my 2008 Mazda 3i to replace a broken clutch coil. Each part of this kit was close, but not close enough to work without modification. I should note that I have replaced my A/C compressor since I've had the car, and the new compressor may not be OEM (it has a sticker on it that says "made in china")The coil in this kit fit in place of the old coil, but the connector did not match the OEM connector, and I needed to re-use (cut/solder) the old connector onto the new coil. What I assume to be a temperature fuse or sensor of some kind also did not directly replace the old one. The old sensor screwed into the compressor while this one didn'tThe pulley and clutch plate did not fit on my A/C compressor (the pulley's bearing had an inner diameter that was smaller than the old A/C pulley. I ended up re-using the old pulley/clutch.While I was able to get my job done with this kit and have my A/C working, it wasn't a great fit and I would have preferred to replace the pulley/clutch as well.
mike
Reviewed in the United States on September 9, 2019
It was an exact fit! And the part looks like its well built, and tested perfectly within Mazda Specification. I was a little nervous when i saw videos of people cutting off the new thermal switch, (its in a less than stellar position on the compressor) but my experiences as an auto mechanic taught me just how tough an A/C line is. they're designed for high pressures, heat, and vibration. while i can't officially recommend this for safety's sake, but i was able to drop the compressor off the engine without detaching any of the A/C lines, and replace the whole assembly with relative ease. it was just 3 extra bolts, and a phillips head screw. The hardest part was the stupid stretchy belt. and after seeing another video of a guy installing it with nothing but zip ties, it went on relatively easily, no special tools required. whole job took about 4 hours start to finish, with additional time included for cleanup, and some extra detail work to make sure everything fit right, and wouldnt move. Im sure it would go faster if i had to do it again, or if you have access to a lift.
Recommended Products