Your cart is empty.
Your cart is empty. PRODUCT INFORMATION
Size： 20"D x 16"W x 28"H
Texture of material：Water-resistant 600D fabric with PVC waterproof coating.
Features： Waterproof, Dustproof, Thermal insulation,Sun-Proof, All-Season Protection.
Package Contents:1 x 9-Inch Desktop Band Saw Cover, 2x Storage Bag
Chad
Reviewed in the United States on January 4, 2025
This cover keeps the bench top bandsaw nice and clean. I’m very excited that I snagged this. Not that bad of a price but you ARE getting a quality made cover. Nice thick material too.
AT
Reviewed in the United States on December 24, 2024
Ordered this knowing I was taking a chance it wouldn't fit my 10" Rikon saw. Full credit, this is a well made cover. Sturdy material, soft lining, colorful handle, patch pockets. It works ok on my larger saw, covering the moving parts and table. Not quite long enough to cover all the way down, the only major part on the lower cabinet is the motor enclosure which is uncovered on my saw. Comes with a decent zippered case, which I will likely never fit the cover into again and could be eliminated to save cost for the manufacturer.
Rk
Reviewed in the United States on December 2, 2024
It's fits my central machinery 9 inch band saw perfectly and the quilted type denier material is almost insulated. It keeps my saw from getting other equipments dust all over it when I am not using my bandsaw in the shop, which means I can keep the blades tracking dialed so it's always ready to go when I need it.
Judy A.
Reviewed in the United States on November 9, 2024
Nicely made bandsaw cover. Heavier, vinyl like material, fits well. Keeps the bandsaw cleaner and dust to a minimum when not in use.
SavvyBuyer
Reviewed in the United States on November 6, 2024
Dust is a huge problem in a woodworking shop. Much effort is made in keeping it controlled, primarily focusing on capture and extraction. Failing that, keeping your tools covered is a good plan "B". I saw this cover as a step in that direction. Most of my tools are floor models but I do have a few bench top ones which this cover is aimed at, specifically a bandsaws.Oddly the cover comes in a nice zipped pouch, once in use, I'm not sure why you'd have it; it'll get repurposed. I was quite pleased with the outer material of the cover. It will shed dust very easily. I threw a handful of sawdust on and most of it slid off. A quick blast of air completed the clean-up. The inner layer is a soft fabric that won't snag when pulling the cover off. They included a couple outside pockets with flap covers to store accessories like wrenches. Those flap covers are rather important in keeping the contents debris-free. As you can see in the photo it was not quite long enough to cover the whole saw. The Amazon page does recommend you measure your saw to prevent my mishap; I could have used another 4-6" in height.I do like the drawstring at the bottom to prevent dust from floating up under a loose cover. That first photo shows that I had put the cover on with the drawstring at the back...better access at the front. The strap on the top does make it easier to remove; since this is a low utilization tool (for me), removal will be infrequent.Except for the pricing, that's the extent of my opinion on the cover. I find this cover somewhat overpriced for what you get, that's just me. It could be the materials are expensive but it's still just a stitched bag.
Customer
Reviewed in the United States on November 2, 2024
Fits my 9" WEN benchtop bandsaw perfectly. The inside is nice and soft, so no worries about it scratching the saw in any way if you're concerned about such things. The drawstring around the bottom makes for a very snug and secure fit There is also a handle strap swen onto the top that makes it very easy to pull the cover off of the saw. The handle is also a convenient hanger to keep the cover off the floor, and out of the way, when the saw is in use. Definitely recommend!
Rocky Racoon
Reviewed in the United States on November 11, 2024
As the description states, this cover is (apparently) designed ONLY for band saws. The bottom of the cover is 32" wide, but the top tapers down to 2-7/8" X 16" rectangle. I was hoping to cover my Delta drill press with it, but the drill press profile is too rectangular all the way to the top (no taper), so that did not work out - back to the black garbage bag cover (sigh!).However, the cover worked well for my Delta compound miter saw.Thus, don't experiment (this cover is not cheap!) - buy this cover only if your tool is 28" high (maximum) and tapers down at the top to a plan area of 2-7/8" x 16".
Beeftimer
Reviewed in the United States on October 20, 2024
The inside is made of a nice soft material that will keep from scratching your band saw. I have a nine inch Wen and this cover fit it pretty well. I didn't realize it at first, but it has pockets on both sides. I found that to be useful as I just very recently bought the saw and wanted to keep all the wrenches and everything that came with it, but didn't know where to store them so they wouldn't get lost. I'll just keep them in the pockets. Problem solved. The cover also has a really cool looking red white and blue striped handle at the top of it that I didn't see either when I placed the order. Neat surprises.
Recommended Products
$8,519.00
$ 99 .00 $99.00
$20.99
$ 10 .99 $10.99