Your cart is empty.
Your cart is empty.Product Description
KIT INCLUDES:
HOW TO REPAIR YOUR INNER TUBE:
Instructions:
1. Remove tire from rim with Tire Lever Removal Tools.
2. Inflate tube and look for punctures or listen for escaping air. For best results, place under water and look for air bubbles.
3. Mark area to be repaired and remove any oily residue.
4. Scuff area to be patched with Sandpaper Scuffer.
4. Determine the Patch size to be used. Apply glue/cement over punctured area (slightly over-lapping). Spread with Sandpaper Scuffer.
5. Allow cement to completely dry 2-3 minutes.
6. Remove foil backing from Patch and apply patch to glued area. Apply pressure especially to the inner area working towards the outer edge.
7. Do NOT remove the clear top plastic
8. Reinstall Tube before inflating
Caution:
Not for use of children. Glue/Cement is harmful if swallowed. Contact a medical physician immediately.
8 PIECE INNER TUBE BICYCLE REPAIR KIT
RocRide's Bicycle Repair Kit For Tubes Works Great On Almost All Rubberized Products
8 Piece Inner Tube Patch Kit
Includes:
1 – Sandpaper Scuffer
1 - Tube of Glue
4 - 1” Round Patches
2 - 2 x 1-1/3” x 1" Oval Patches
Convenient Plastic Case Measures 3.2" x 1.3" x .88"
STRONGER THAN PUNCTURED ITEMS
RocRide new patches are more durable than the actual rubber inner tube or dinghy materials that you will be patching.
LIGHT WEIGHT AND COMPACT
Only 0.9 oz and it’s also great to have in your backpack, hydration pack or utility bicycle pack.
J.Robert Fiesel
Reviewed in the United States on September 23, 2024
I really liked getting the dots size pieces of patch and the oblong to make up my own shape if necessary, glue and sandpaper. It’s a complete package. Thank you so much.
Ricky Serna
Reviewed in the United States on September 1, 2024
SUPER price Firm-sturdy 100% Satisfaction
keyriverguy
Reviewed in the United States on February 27, 2024
Arrived on time and as promised. Very good patch Kit . I ride about 1,800 mile and year on my bike and I do get flat tires. The kit is simple and easy to use and the patches have never failed me.
Elisa Heilman
Reviewed in the United States on October 30, 2024
I purchased this to put on an outdoor playground ball. The sandpaper roughed up the ball well and the glue and patch stuck well. i followed the directions on the back.
mike hembree
Reviewed in the United States on September 4, 2022
Got this to repair a tube in my wheelbarrel. Went exactly by the instructions let the patch set for 24 hours before installing the tube. Put the tube back in the tire put the proper amount of air in the tube, It was flat 2 days later and had not even been used. Just went back online and bought tubes less head ache.
Lauren
Reviewed in the United States on August 19, 2021
I followed the instructions closely. I have use patches many many many many times as I used to ride cross country tours with no support and had to patch tubes for thousands of miles. I have never had this many problems with a path kit. Tried one patch 3 times and then went to a bike shop and got a good a kit that actually works. Not eligible for return due to hazardous chemicals and no refund either. Waste of time and money.
Gigabitz
Reviewed in the United States on April 11, 2020
These patches are great, and they're a good price.But - YOU HAVE TO LET THE GLUE DRY!!! What do you do after you put on the glue? YOU LET THE GLUE DRY!!! LET! THE! GLUE! DRY! (!!!) For Pete's sake, I swear that every person on here who's complaining about these patches failing didn't let the glue dry for a solid five minutes before they stuck the patch on. Let the glue dry, and the patch will work just as it should.Also, when you peel the patch off the foil, be very careful not to roll the edge - it's hard, but do as good of a job as you can. And LEAVE THE CLEAR PLASTIC SIDE ON IT - if you try to remove it, you increase the odds of peeling up the edges before they've cured. Leave the plastic, and use the patched tube with the plastic on it - it doesn't hurt anything.
Larry
Reviewed in the United States on June 2, 2019
Did not work on a Specialized tube. Maybe it doesn't work on their tubes, or maybe I was doing something wrong. I followed the instructions, installed the tube and tire, inflated to 50 psi and the patch blew out after 2 minutes.
Recommended Products