Your cart is empty.
Your cart is empty.3-Pin header with approximately 3" (75mm) power line Fan Dimension (Diameter x Height) approximately 2 7/8" (75mm) x 3/8" (10mm) Mounting hole center to center distance are approximately: 1 5/8" (40mm), 1 5/8"(40mm) and 1 5/8" (40mm). Please measure the distance and make sure the mounting hole will fit your card. Make sure your card can accept 4 pin connector. Please also make sure your heat sink can take the height of the fan. The fan can fit multiple models of cards so please make sure the fan's size will fit your card. No return is accepted and no replacement is available for mounting hole position, pin or height mismatch. (bulk stored may have minor scratch not affecting function)
Old1937
Reviewed in the United States on March 18, 2021
The blades broke on my old video card. This fan is just a little smaller than the spec's but it works great.The screws went into the holes and fit nicely between the cooling fins to hold the fan in place.Keeps the video card nice and cool.Edit: spelling
Nicole S
Reviewed in the United States on November 1, 2019
This worked perfectly to make an old gpu usable again. One of the blades was slightly bent on arrival probably due to the poor packaging. The fan, no box, was placed in a cushioned envelope. I just bent it back. Works flawlessly.
BNA
Reviewed in the United States on January 11, 2019
Helped bring an older machine back to life. Built a new machine as the old one was a few generations behind and had heat issues. Now decided to rework the old machine since parts are so expensive didn't want to waste what was still a decent rig. Found all the fans including this one were turning very slowly and making lots of noise. System fans were easy enough to source but it's a little tougher to find the right graphics card fan. If you have a Gigabyte HD 5770 graphics card that needs a new fan this one is a perfect fit. Screw holes line up and the 3 pin plug fits the socket on the card perfectly is keeping the card's temps down and is silent. Old machine is back online: Biostar p55 T5 XE Mobo, Intel core i5 750, 8 gigs ddr 3 ram, xonar dsx sound card, HD 5770 video card, dual boot win7 pro and linux mint 19.1 Windows on Crucial MX 500 250GB ssd, Linux on Pioneer APS-SL3-240 240GB ssd. This is a SATA II system so ssd speeds are not the fastest but still super good compared to hdd. The Pioneer ssd is less costly and every bit as fast as the MX500 in this system so in hindsight should have got two of the Pioneer's and saved. These Pioneer ssd's are a real bargain for the money.
Daniel Klenczar
Reviewed in the United States on June 1, 2018
Bought two of these to replace the failing fans on a Gigabyte R7 260X. They are exact replacements and work as expected. These are 3 pin fans yet the card has one 2 pin and one 3 pin fan. You can order the two pin fan however I just removed the connector from the old 2 pin and put it on one of the 3 pin cutting the third RPM wire.
Recommended Products
