Your cart is empty.
Your cart is empty.
Carburetor Intake Manifold Joint Boot with Throat Hoop Gasket for Yamaha
Carburetor Intake Manifold Joint Replaces Number:
JKJ-23
24M-13586-01-00
Fitment:
Fits for 2015 Yamaha TTR230
Carburetor Intake Manifold Boots for 1984-1987 Yamaha Virago 700 XV700
Carburetor Intake Manifold Boots for 1981-1997 Yamaha Virago 750 XV750
Carburetor Intake Manifold Boots for 1981-1983 Yamaha Virago 920 XV920
Carburetor Intake Manifold Boots for 1988-1999 Yamaha Virago 1100 XV1100
Function - Replaces dried out, cracked old may cause engine failure intake manifold Joint Boot.
Service - 2 years shelf life
If you have any questions about our products, please contact us by email, we will reply you within 24 hours.
Package:
1x Carburetor Intake Manifold Boot
1x Throat hoop
Frank
Reviewed in Mexico on January 9, 2025
Llegó a tiempo
Beware ! Way smaller than you think
Reviewed in the United States on January 7, 2024
Quality factory replacement
Eric S.
Reviewed in the United States on August 25, 2022
Oring is glued in which make installing these boots so much quicker and easier, both boots held a good seal. inner boot could use a little bigger cut out for the carb flange but no big deal. Will buy again when needed
Michael Anderson
Reviewed in the United States on July 31, 2022
Would buy again. They come with an o-ring built in which is nice, and made putting my carbs back on a lot easier than using my old hardened manifold boots. Only issue was a small but frustrating hurdle, I used the metal sleeves that went over my original boots, and wasn't a perfect fit on one of these new ones, very close though . The other one fit great. Had to grind out the slot for the vaccum line a couple MM in the one, which was fine, but was also difficult to fit it over the rubber of the boot on the slotted side, which ended up being more of an issue. Got it over pretty easily with a screwdriver and pliers before I installed the carbs, but slid off in the process of installing. Couldn't get all the way properly back on once they were in, even with a lot of effort. Got it on enough to work though and didn't feel like taking the carbs back off after all this so I decided to leave it. If I did this again and OEM were twice as much, would've went OEM. But they're a lot more, so for the price I'd buy these again. If your not worried about money go OEM where quality control will be much better, and you won't have to worry about these issues. Otherwise you get what you pay for .. and these did the job
Yili Yang
Reviewed in the United States on August 19, 2021
I really like this, I have a 1996 Yamaha Virago XV750, not sure if my boots were the original, but it is now cracked. I bought this set without seeing them and I am pleasantly surprised. My original set had slots for a rubber o-ring, it is hard to keep the o-ring in the groove while you mount. This set had the o-ring kinds of built into the boot, so nothing was slipping out. I have no regrets, this did me a solid, I recommend it to anyone. I got them pretty quickly too, not lighting fast, but perfectly fast enough.
James Shields
Reviewed in the United States on July 24, 2021
Cheap hose clamps
Ralph White
Reviewed in Canada on July 18, 2021
Poor quality o rings didnt fit properly very disappointed.
cmed
Reviewed in the United States on February 22, 2021
Worked great fit on the bike as nice and tight and annoy as the OEM.
Julienn
Reviewed in the United States on April 5, 2021
Installed the boots and o rings and still had vacuum leaks from the boots and o rings. O rings were a massive pain to get situated during installation and fitment was off I'd just pay the extra 2 dollars for the nicer ones. Definitely not buying from the company again
Steve DeNoto
Reviewed in the United States on June 13, 2020
Great product and fast shipping
Recommended Products
$11.99
$ 5 .99 $5.99
$22.00
$ 10 .99 $10.99