Your cart is empty.
Your cart is empty.Product Description
JinRui-T Car LED Light Strip Drl Daytime Running Lights Flexible Auto Switchback Headlight Surface Tube Decorative Lamp Flowing Turn Signal Styling
Easy Install
You just need to tear off the sticker, paste it on the installation position and connect the correct wiring diagram, After the test can be used normally.
Features:
High luminous efficiency with high brightness lighting output, superior illumination and stability
The ambient lighting car interior Made of high-quality tough materials, it has a very good waterproof and dust-proof effect, anti-aging, arbitrary bending, high light transmittance, and more convenient installation.
Flexible RGB Led Light Strip——Soft and easy to make any shapes or length to
Waterproof IP68 Design ——The LED strips adopt waterproof buckled plug design with short circuit protection for more safe driving. High luminous brightness, without dark spots, no dead light , stability in rainy or foggy days at day and night,clearer line of sight when driving
Specification:
Fast on / off
Universal fit for any DC12V vehicles
Length: 60CM / 24 Inches
Waterproof: IP68
Working Voltage: DC 12V
LED Type: SMD 3014
Light source: Highlight 2835
Color: Multicolor
Package Included:
2Pcs * 24 Inches RGB led strip lights for cars + 1* RF Control
Features:
1、The Car LED accessories for men uses RF to connect. You can choose any color you like from a variety of colors and adjust the mode speed. Jump, flash with gradual color synchronize . also you can choose a combination of solid colors or DIY colors
2、The ambient lighting car interior Made of high-quality tough materials, it has a very good waterproof and dust-proof effect, anti-aging, arbitrary bending, high light transmittance, and more convenient installation.
- JinRui-T Car Headlight Strip Lights Multicolor 24 inch 12v led Daytime Running Lights RGB Flexible Headlights LED Strips Waterproof Switchback Sequential Turn Signal Lights RF Control
- Note:1、It can be cut and re-capped, but it is important to note that after cutting, the tail must be insulated.
- 2、The operating voltage is 12V DC. Excessive voltage may cause short circuit. Please check the voltage before installation.
Joel Talamantes
Reviewed in the United States on March 21, 2024
The media could not be loaded.
Customer
Reviewed in the United States on November 15, 2024
Easy to install if you know simple wiring. Adhered well to my car and despite having some hot days, and now some rain, it is still adhering well. Controls are simple to get the color you want and looks nice on dark days. During the day, it could be a bit brighter to pop out more, but I can't complain too much about its day time visibility. Its the night time that matters for these. Great way to spice up the aesthetics of your car and these are a nice option.
Luis Vazquez
Reviewed in the United States on April 10, 2024
If you going to install this outside make sure you hot glue the end caps mines got wet in the inside and rust started to build up,and you can see the brown in the outside of the silicone. They also aren't as bright! This is after couple months of installing it
guy ogawa
Reviewed in the United States on June 14, 2023
I like the overall feel of the light. My yellow is more of a greenish yellow. They are nowhere near as bright as the pictures advertising it.😭 In reading other customers comments, and checking my own setup, it does appear that the adhesive strip is on the same side as the led.
lee johnson
Reviewed in the United States on March 23, 2023
They look pretty decent as one person point out the wiring is surely difficult even with constant voltage and both turn signals on switch back function would not work. Your best bet is ground directly to batt for ground, was able to get the switch back function to work (Do not use t taps) splice the wires in. Could be brighter and have better color reproduction but for a little under 20 dollars no complaints .
Jextra
Reviewed in the United States on February 8, 2023
These are great! I’ll add some video when I get a chance. This is my second set. The first, I mounted under the car just below the doors. My car is black, so I took a strip of vinyl headlight tint and put over them. You can’t see them at all until they come on. I don’t have them on all the time, strictly for turning and in the “chasing” setting. They surprise people and look really cool. Second set is under the back bumper-same settings. From reading some other reviews… There seems to be a little confusion….The power wire runs these lights constantly. That’s your “daytime driving lights.” The wire that goes to your signal will interrupt the constant light setting you have going and flash like a turn signal. Red wire to a switched/accessory 12v source. Black to ground. Green and blue to respective side turn signal. I tapped into the side turn signal wire for my front ones and the rear turn signals for the ones under the bumper (ran wires down through trunk, under spare tire where I drilled a small hole for my backup camera wires and these to run through and sealed with silicone. The power wire can go to your license plate lights to have them in only when your headlights are on. Good luck all!
Customer Review
Reviewed in the United States on October 1, 2023
Not much to these really. There were no instructions so it took a bit of searching to install them correctly. Oddly, the adhesive seems to be on the same side as the LEDs which makes installing this… odd. I don’t understand why the LEDs are not facing out toward where you want the light? Also, the cords are quite short which required me to add a secondary wire harness on the reach power. But that said, they look pretty good, though are difficult to see in the daytime. I wish the adhesive was on the opposite side! But they work so a solid 3 stars.
Larry
Reviewed in the United States on April 1, 2023
I bench tested these and they worked as they should , went install on the car , NOTHING!!
Recommended Products