Your cart is empty.
Your cart is empty.
Specifications
- Housing Material: Aluminum Alloy
- Chain Material: 20Mn2
- Hook Material: Manganese Steel
- Rated Voltage: 110V
- Rated Power: 1500W
- Type: Double Chains
- Motor Protection Grade: IP55
- Insulation Class: F
- Chain Diameter: 6.3mm/0.25inch
- Motor Type: Pure Copper Motor
- Plug Type: American Standard
- Maximum Load Capacity: 1T/2200lbs
- Lifting Speed: 4m/min (13ft/min)
- Lifting Height: 4m/13ft
- Handle Switch Wire Length: 3m/10ft
- Gross Weight: 28kg/61lbs
- Package Size: 51*28.5*39cm/20.9*11.22*15.35inch
- Machine Body Size (L*H): 45*15cm/17.72*5.91inch
Package Included
- 1* Electric Chain Hoist
- 1* Lifting Strap
- 1* Chain Bag
- 1* English Manual
- 1* English Inspection Certificate
Notes
1. If the specified object is too large or the object cannot be hung directly on the hook, you will need to tie a longer webbing around the object and then hook the webbing with the hook to lift the object.
2. Please ensure that all persons in the immediate area are informed and warned of the need for safety before lifting and moving heavy objects.
3. Please do not leave lifted heavy objects unsupervised for long periods as this may cause injury.
4. The lifting weight shall not exceed the maximum load capacity of the product (Single chain weighing up to 1100 lbs, double chain weighing up to 2200 lbs).
5. Please do not use the chain when it is bent or twisted.
6. Please do not throw the product to avoid damage.
7. For the uniformly distributed work cycle, the maximum operation time of the hoist per hour is 25%, and it can handle up to 150 starts per hour. When used for infrequent working hours, it can run for 30 minutes from the cold start, with a maximum of 200 starts per hour.
8. Before using the machine, please read carefully all the safety instructions in the product manual.