Your cart is empty.
Your cart is empty.Want to change the entire look of your home simply and affordably? Replacing your entry’s doorglass insert is a quick and simple do it yourself project that will increase your home’s value and effortlessly update your curb appeal.
Customer
Reviewed in the United States on January 19, 2025
We have a rear door in our manufactured home that has a single pane window and sweated badly when it was cold out. It was only 1.5” thick so my concern was fit. Someone on Amazon said it would with sealer so I tried it. It fit perfectly and I just added an adhesive foam seal around the window opening on the inside and that held the window and sealed great. No more sweating issues. It was worth the investment.
A Bury
Reviewed in the United States on August 19, 2024
Straight-in proper fit. The unit matches the photo and matched the unit it was replacing. Easy to install, just want to have flat space/surface to work on and I used some lengths of wood and clamps to hold the unit in place to the exterior side while securing the screws on the interior side.
Selaretus
Reviewed in the United States on July 28, 2024
I cut this window into my back exterior door, which had no window at all. Lots of welcome light in the cellarway now!Easy enough to do, I used my angle grinder with cutoff wheel to cut in rough opening on both sides of the hollow aluminum skinned door.
Erin Orr
Reviewed in the United States on June 26, 2024
This fit perfectly and was so easy to install. Excellent packaging that kept our new window safe and and in one piece.
Geoff M
Reviewed in the United States on February 24, 2024
Positives - Exactly what I needed, perfect fit in my opening and (what should have been) a super easy installation! Packaging of the assembly was well done. IN transit, the outer box was punctured/damaged right where the glass would be. The item received no damage and after I opened it, you could see how well protected it was.Negatives - See pictures. I did not closely inspect the item (other than for clear breaks or damage). What I found was that after I fully installed the assembly that one side was not "seating" into itself properly. I didn't want to overtighten the screws as I didn't want to break the glass. I noticed that the screw holes were not lining up and pulling together, but I couldn't figure out why. I had to uninstall the whole thing and try to figure out what was going on. On closer inspection, I could see that the pane of glass on the top was off-center and was not allowing the assembly to be properly installed, flush against the door and itself. I knew I had 2 options: go through a return process which would leave me with an opening in my door in the middle of winter for who knows how long, or make some alteration to make it work. I opted for making the alteration. You can clearly see that the glass was not allowing the screws to pull tight against the other side of the trim. You can see where I notched the mounting hole at an angle to try to get "around" the glass, but that wasn't enough. I had to make a prominent notch (90° x 90°) to allow the glass to lay flat and still let the screw get into the mounting hole. What should have been an easy installation took far too long, I had plastic shards all over my work area from "carving" and for all I know, I may have degraded some of the structural integrity of the whole thing.I will gladly change my review and rating with a response and appropriate action from Amazon and/or the manufacturer.
jackdavid
Reviewed in the United States on February 12, 2024
I bought this to replace the one that was in the door. There is more than 1 size. I took the original one out and got the measurements then ordered. Needless to say it was prefect fit. Thank you.
Marilyn Hatton
Reviewed in the United States on November 8, 2024
Looks good
cmw11
Reviewed in the United States on October 7, 2023
Kicking myself for not getting this sooner. Crazy easy to install. Literally took less than 10 minutes.
Recommended Products