▶Product Description
Product Name: Corner Wall Mount Bathroom Sink
Material: Ceramic/PVC
Faucet: Hot and cold water faucet
▶Accessories:
Ceramic sink
Mirror
Black hot and cold water faucet
Explosion-proof water inlet hose
A pair of connectors
Strainer
Mounting screws
▶Size:
40cm: External: 40*40*52cm/16*16*20.5in lnternal: 55*34*9cm/22*13*3.5in
45cm: External: 45*45*52cm/18*18*20.5in lnternal: 63*40*9cm/25*16*3.5in
Mirror size: 21*10*60cm/8*4*24in
▶Feature:
Our lockers are made of PVC environmental protection material, waterproof and moisture-proof, strong and durable
There is a locker under the sink with lots of storage space
The wall-mounted design does not take up floor space, suitable for small spaces
This product includes a high-definition mirror
There is a double storage space behind the mirror
1280 ℃ high temperature firing one-piece ceramic pot, durable
Three-layer glaze process, bright and clear, not easy to yellow, easy to clean
Water-blocking edge design prevents water from splashing on you or running around
▶About the exhaust hole
When the ceramic is injected into the embryo, it is necessary to make a suction hole so that the steam can be exhausted during the firing process.
After molding, the master worker will use plastic soil to seal the air holes, which is an important process in making ceramics.
The exhaust hole is generally at the bottom of the ceramic product, which will not affect the normal use and appearance.
Because the air extraction hole is purely manual operation, the appearance of the sealing hole will be misunderstood as a defective product or a defective product. In order to eliminate the customer's concerns and misunderstandings, it is explained here.
▶If you have any questions, please contact us via email. We will respond within 24 hours and provide full service. Hope you have a good shopping