Your cart is empty.
Your cart is empty.Product Description
Compatibility
Holds four computer monitors (13” to 32”) weighing up to 22 pounds each with VESA 75x75mm and 100x100mm mounting holes.
-
FLEXIBLE VIEWING
180° Swivel
-
HEIGHT ADJUSTABLE
Height Adjustment along Center Pole
-
SOLID CONSTRUCTION
Solid Steel Construction Provides Exceptional Support
-
CABLE MANAGEMENT
Keep Power and AV Cords Clean and Organized
Eric Jones
Reviewed in the United States on March 12, 2025
I love this four monitor stand. It is very well made and very rugged/solid. It holds my four 29" monitors very well. You might have to adjust the nut for the monitor tilt a little, but all of the tools are included.
Mark
Reviewed in the United States on February 7, 2025
Great value, easy to adjust, and great quality! This works wells on my raising desk and I have had zero issues. I had 3 27” monitors and a 34” at one point. This looks great and is versatile. The arms can be removed if you decided you just wanted 2 monitors in the middle. I love that I can adjust these and take advantage of my full desk space. With the top monitor being higher, I like the ability to tilt it downwards to help with the viewing angle.
Abbas Virji
Reviewed in the United States on February 15, 2025
very strong, sturdy and flexible... easy to install
David Schwindt
Reviewed in the United States on January 4, 2025
I replaced a two-over-two monitor stand with this one to get three monitors across my desk. I mounted four 24" Dell monitors on it. The mount was easy to assemble, easy to adjust so all monitors were lined up, and seems very sturdy. I would absolutely recommend this mount.
HudsonTC
Reviewed in the United States on August 2, 2024
I've installed many monitor stands for clients over the years and Vivo has never failed. This particular version is not very common with 3 wide x 2 tall. I'm very pleased overall with this setup. My current configuration is a 32" primary monitor, 2 19" in portrait mode on the sides, and a 24" on top. Other reviews mentioned that a 32" with a 24" on top would likely require you to lower the primary monitor nearly down to the desk, defeating some of the purpose of this type of stand (freeing up desk space). However, this is easily solved by adding a B07MCSDCN5 to the top monitor, which provides an additional 3.5" of travel, both up and down. As this add-on bracket moves your top monitor forward a bit, you'll also need to add spacers to your primary monitor to accommodate this .I'm very particular about my monitor setup as I use it all day long every day. Even as a mechanically inclined person, it did take quite a while, with various trial and error attempts to get just right. However, with the addition of the top height adjustment bracket, this mount is an easy home run, as long as you're willing, and capable of spending the time to get it just right.
Kevin
Reviewed in Canada on May 23, 2024
An excellent product. It's sturdy, heavy, and allows for two installation modes. The only downside is that the top screen must be smaller than 26 inches if you have a 32-inch screen as your primary monitor. Otherwise, everything is great. Installation is fairly simple, although it can be time-consuming if you skip steps.I recommend it, for the price, it's the only one I've seen that can hold 4 monitors.
Aristippus
Reviewed in the United States on February 3, 2024
PROs:- Two different options for mounting, both clamp and bolt.- Quite sturdy, with nylock nuts adjusting the arm stiffness.- The 3+1 configuration is ideal for me, vice the 2x2 frequently seen elsewhere.- Has survived two cross-country moves with no issues at all.- I appreciated the hardware options provided with the kit, to include the standoffs necessary for some monitors and their associated longer bolts.CONS:- Arm length is fixed; if your desk is flat against a wall this WILL NOT WORK for you (unless your rocking 3x 32" monitors across the bottom, in which case you might be okay).- If you're not comfortable mechanically, this product will frustrate you (particularly since it doesn't come with instructions - at least mine didn't). Multiple adjustments are necessary, and getting your monitors aligned how you like them might take you some time to get right.ADVICE:- I opted to drill and bolt the assembly to my desk. I strongly recommend "roughing-in" your setup before drilling, as this will determine how far away the center screen will be since this monitor stand cannot adjust in/out from the mounting pole.- In addition to the bolt, lockwasher, and plate provided with the kit, I additionally added a 4x14" piece of 5/8" scrap plywood in between the support plate and the underside of my desk in order to distribute the load better.- Take your time with wire management, and don't rely on the easily-damaged plastic clips that come with this product. While you're here, shop for some velcro cable management strips of sufficient length (you'll need 8-10" long strips to be effective, 6" will only barely work), and when setting up your system make sure to leave some slack in the cables around the joints of the monitor stand.This stand is just slightly shy of perfect for my setup. Top screen is an aging 27" LED display that is generally only used for system and network monitoring tools. Along the bottom I have a 27" 4K gaming monitor flanked by two 22" 1080p screens primarily used for chat programs, references while writing papers, and other miscellany. While I could easily step down to three - or maybe even two - screens, this monitor stand gives me the ability to have everything I interface with on display all the time. Additionally, it gives me the flexibility to modify my setup for when I finally get around to replacing the gaming monitor with something bigger.
Android user like R2-D2
Reviewed in Canada on December 8, 2024
This stand was actually easy to assemble. The stands arms are very strong your monitors wont sag or be flimsy, Its very adjustable in everyway you will line up your monitors perfect. Great cable management the tube is hollow so your cables will run down inside of it. I suggest you run to Home Depot and get M4 12mm panhead screws bcuz the screws that come with the unit are made of plastic and will most likely strip when you screw in your monitors. Depending on the size of your monitor that you will you put on top dry fit your main monitor to space it out so you will have room for both monitors to place. Overall great product now i can watch football,hockey,security all together
Keith
Reviewed in the United Kingdom on December 31, 2024
If you need a heavy duty quad adjustable stand for your monitor array then this is a great buy in my opinion. Easy to assemple and all the parts fit and work.
Chris
Reviewed in Australia on November 5, 2024
Great for gaming and having work monitors also abit bulky but does the job it's suppose to.
RDEA
Reviewed in Australia on April 30, 2024
certainly helps when you need to look across multiple apps at the same time. Great for multi tasking
EvilWays
Reviewed in the United States on September 25, 2018
Sturdy, and what is included IS high quality. The only reason for the 3 star review is because of the lack of included mounting options. Any TV and most PC wall mounts you purchase now come several screw types and sizes to make the product more universal. This does not. While the included m4 thumb screws would be nice to use (if your monitors allow for it) what about users whos monitors use a different mounting option? My monitors mount with M6 screw. This meant I not only had to go buy my own scres (no biggie) but also had to drill out the VESA plate to accommodate the larger diameter screw. While the process is simple, and the metal soft enough to drill without using lubricant or special drills, not everyone will be willing to do this, and shouldn't need to be. VIVO you're a huge name in the market for monitor mounts. Get with the program. The only reason I kept this mount is because it's the only one on the market capable of holding 4 32" monitors. Had this not been the case, I would have returned it to you and purchased a different mount that I wouldn't have needed to drill.TL;DR:Pros:-Only affordable 3x1 mount I found capable of holding 32" monitors.-Sturdy. Very little wiggle for such a heavy amount of weight being held-Included hardware is decent quality.-Very Well written instructions-Decent adjustability options for leveling.Cons:-You will likely need to diy the mounting plates-You will likely need to supply your own screws.
Recommended Products