Your cart is empty.
Your cart is empty.With durable steel construction, this versatile machine stand is sturdy enough to hold a personal printer, fax machine or copier. Two convenient drawers below the top shelf can hold printer supplies, specialty paper and more. Easy-to-assemble, underdesk machine stand rolls easily on four twin-wheel casters (two locking).
Curious
Reviewed in the United States on January 3, 2025
I love this stand. I have my Cricut on it and my other printer. The drawers hold all my paper and then some. I've had it for a while so over time it has help up just fine.
jnksr
Reviewed in the United States on August 7, 2024
I was concerned about the reviews that said this cart was not sturdy. The only flimsy part was the means of attaching the lower shelf. My husband purchased four heavy screws to attach the lower shelf that made it stronger. The shelves are plastic and could be used for light weight items. It was a bear to figure out how to construct it bacause the directions were poor, but we finally figured it out. The cart is perfect for our intended use and we are happy we bought it.
Greg Shaheen
Reviewed in the United States on August 9, 2022
I am stunned at how poor this product is constructed. Not that this is extravagantly priced, but basic function should be assumed. This is the first review I've ever done -- because the product was so poor.The instructions were not clear, the parts were difficult to differentiate and some were missing.The wheels are cheap-feeling out of the box. The wheels fell out as I turned the cart right side up to begin using. The wheels haven't been able to support a lightweight, standard-size printer that gets regular but far from extensive use.The wheels literally fall out every one to two weeks, when nothing is happening (i.e. not always when printing), one at a time. I've tried different tapes, etc. in an failed effort to strengthen the wheel inserts. I gave up and simply can't get the thing to survive a couple weeks -- to the point that the cart metal cut into the hardwood floor today. Ridiculous.I'm hopeful no one will purchase this unless and until the design and assembly is strengthened.
Alex_t
Reviewed in Singapore on March 5, 2022
The quality of the rack is pretty good. It’s made in Taiwan . Would have given a full 5 stars if it’s not due to some defects.a bit difficult to fix it all together coz the frame for the base surface was bent at 3 ends. So did not get a clean closure to all edges. And the instructions are not clear, you’ll have to figure out the installation, which is alright after a bit of trial and error. All in all, still a good buy.
Tonya Freeman
Reviewed in the United States on March 2, 2022
The stand is the perfect width & height for where I needed it. The instructions provided are terrible & it took a minute for me once figure it out. Once I did it was very easy to assemble. I like the 2 drawers, perfect for ink cartridges. The day after I assembled it & put my printer on it I needed to roll it out to get to the back of my printer. When I did one of the front legs bent back, my printer almost slid off. I couldn’t return it because I was pass the return deadline before I ever took it out of the box. The other legs seem strong. It may have been a defect in that particular stand. I haven’t looked at the other reviews to see if this has been an issue. Having said that, if I could have returned it I would have replaced it with the same simply because it’s a perfect fit for where needed it.
S. Theobald
Reviewed in the United States on March 19, 2022
The other reviewers are correct. The directions with this are pretty bad. It's basically just a blown out photo without any actual instructions, and not all part numbers are included in the blowout, so you basically have to figure out that part yourself.The bottom shelf is definitely not as sturdy as the top as it is a thin piece of metal that is easily bent and has no cross bar under it. The drawers are plastic (one of mine ended up with a broken corner), as are the drawer pulls and wheels.However, the end result is satisfying. I bought this for my Cricut Maker, mats, and cardstock and it fits all of that well. It freed up desk space while improving my workflow.
DeanO
Reviewed in Australia on June 25, 2021
These don't hold much weight at all. I have had a wheel collapse on each of the two I bought. Also the drawers like to fall out of their rails if you pull them out more than 1/2 way (quite often). Wouldn't buy another. These are definitely NOT (in fact not even close to) heavy duty.
DMC
Reviewed in the United States on April 5, 2021
This product is being used to hold an HP large format printer (40+ pounds), and it seems sturdy and should hold up well over time. However, the assembly instructions leave quite a bit to be desired, as they consist of a single poorly drawn planogram with no verbal instructions. As someone who is pretty mechanically inclined, I was able to figure it out with only one or two missteps, but I can see others getting very frustrated with trying to put this together.
EmilyLynn
Reviewed in the United States on May 27, 2020
I’ve been looking for an under desk cart that could hold my Cricut Maker and its accessories and this is one of the only printer carts available that was big enough without being too big to fit under my desk. I love that it has drawers and a second shelf. However, the assembly instructions were extremely poor. I love putting furniture together and this wasn’t too complicated, even with hardly no instructions, but it’s something to be aware of. The top shelf is much sturdier than the bottom shelf. The top shelf has an iron bar running across the middle to hold the drawers, giving it extra support, while the bottom shelf does not. I think the top shelf could comfortably hold 20-25 pounds where the bottom shelf should only hold about 10. Will update my review if any problems arise, but for now, so far so good.
DisturbJalapeño
Reviewed in Canada on November 12, 2019
I was so drill that the delivery came two days ahead of schedule delivery. Took 20 minutes to put it together but didn’t even lasted 5 minutes before one corner of the welded joint broke off trying to wheel it on carpet with small printer. One would think you would weld three sides to make each leg stronger.
Emma Romero
Reviewed in Mexico on October 25, 2017
Llegó en tiempo y formaMuy bien conforme descripción del producto.Super práctico para oficinas pequeñas y el tamaño perfecto para poner una multifuncional, hojas y otros objetos de utilidad
Citizen Pro
Reviewed in the United States on March 22, 2016
This piece was easy to assemble, provides all the storage I needed for extra paper and a platform for an office printer. Some of the materials are a little low end, but for the price it looks classy as an office piece. Some of the parts arrived a little bent but nothing a few plier tweaks couldn't fix. Construction is solid and, when assembled, everything sits together well.Pros: executive appeal, solid constructionCons: components bent upon delivery
Octavio A. Gallardo
Reviewed in Canada on July 12, 2015
Great designe,easy to put togheter and the perfect piece to unclutter my desk area. Solid material will accomodate mid size printers with no problem. Good purchase and is highly recommended.
Recommended Products
$129.99
$ 58 .99 $58.99