Your cart is empty.
Your cart is empty.From the manufacturer
UTG Leapers MT-RMRKIT Inc Super Slim Picatinny RMR Mount 2 in 1 Combo
•Precision CNC Machined from 6061-T6 Aircraft grade aluminum and finished in a matte black anodize
• 0.87" Saddle height mount positions RMR at the correct height for an absolute Co-witness in line with standard height AR Iron sights
• Low profile 0.40" saddle height mount positions RMR at a low enough height to achieve a comfortable cheek weld and correct sight alignment on most shotguns and rifles with stocks not in line with the bore and equipped with a top picatinny rail, and is also suitable for handguns equipped with a top picatinny rail
• Utilizes locking torx screws and square-shaped integral recoil stops for a secure zero hold
• Significant lightening cuts reduce overall weight and bulk
JME
Reviewed in the United States on September 22, 2024
This did not fit, as advertised in the wording, but no problem. I drilled and tapped new holes and made it work. It is a very nice mount - low profile, and I like the one sided mount clamp system. I do believe is it quality and why I chose to keep it and make it fit my application.
Matthew H.
Reviewed in the United States on September 17, 2024
Perfect for my AR good design sturdy definitely recommend
Hlavere
Reviewed in the United States on December 26, 2024
added this to an AR15/22 riffle to mount a pistol optic. Have been to a few shoots and has worked perfect.
Pauline Beeson
Reviewed in the United States on November 12, 2024
Very nice rmr mount. I recommend it 100%, i got the co witness model and mounted my cyelee wolf x pro on it.
Customer
Reviewed in the United States on October 25, 2024
Fit and finish look and feel really good. Seems very secure on the picatinny rail but I've not been able to mount the optic since the included 6-48 screws are too short. Some have blamed the manufacture nut I believe it's due to using a knock off optic like I am, the screw mount area is machined differently then a true Trijicon RMR. I ordered longer screws and all shpuld be good to go. Should be fun for airsoft
ZeroSixFiveZero
Reviewed in the United States on April 17, 2024
Quality: very nice finish with no sharp edges left from the machining process. Color is even and fully distributed over the surface.Fitment: fits solidly on the pic rail without any wobble. The top base fits my King Slayer perfectly.Field testing: have not been able to take it out so update to follow.Verdict: would definitely buy again
NK
Reviewed in Canada on June 6, 2023
Good quality product. Fits RMR footprint perfectly. Nice to have the option for low/high mount. All bits and parts included for a worry free installation.
Cory Best
Reviewed in the United States on October 30, 2022
Solid construction with a nice mat anodize, though slightly rough to the touch, that assists in screw retention even without thread locker. I would however still recommend a thread locker if using this for anything more than airsoft or rimfire.*Important note* - The thread pitch for the screws provided may, or at least they were in my case, be different than screws provided by the manufacturer for an optic being mounted. The screws you intend to use MUST be able to easily bottom out by hand without the optic in place. How to tell: if your screws (by hand) stop turning firmly & suddenly, they have bottomed out, if they stop slowly with a mushy feeling, this is a sign of a variation in thread pitch. Use of screws with a different thread pitch is asking for failure & disappointment.You may have to seek alternative screws or carefully modify the length and/or head diameter of the UTG provided screws in order to properly mount your preferred optic.
SKogan
Reviewed in Canada on July 13, 2021
I purchased this as a replacement for the picatinny mount that came with a Holosun sight. I haven't tested it on the range yet, but it is already evident that this mount fits onto the rail much more securely and should be much more reliable in holding zero.The RMR side also fit perfectly well with the sight.
Jason Van Eaton
Reviewed in the United States on March 30, 2021
Price was great compared to other manufacturers. I liked getting 2 products for the price of 1.I initially installed the optic on the lower mount, but it was too low, so I moved it over to the co-witness mount. I had my brand new, Real Avid Smart-Torq set to the recommended 12 in-lbs, and it clicked off correctly for the lower mount, but when I moved the optic to the co-witness mount, the mount stripped (the screws themselves were fine; they came out with stripped metal in the threads).Also, the screws provided with the mount have a much wider head than the screws provided with the optic. Unfortunately, none of the screws provided with the optic fit the mount's thread pattern, so I used the mount screws, but they just covered the battery compartment!And I missed my return window by 2 days. Overall, a very disappointing experience!
JOON
Reviewed in Canada on July 8, 2020
Fit & Finish are very good. First thing I noticed, It's lightweight!! Like the other mount I had without the optic weighs more than this mount, optic and screws all together. Wish the low mount was available but as for absolute co-witness, i took me a couple minutes to gets everything setup on the table. Looking forward to testing this out
Lehr
Reviewed in Canada on August 15, 2019
I got this and mounted a holosun 507c on it. Fit without any issues.The threads on the mount seems a little weak. Follow the torque on the package. I went a little bit over and some of the threads started shaving off.
Rufferto
Reviewed in Canada on November 17, 2018
Great product. Great value.
Recommended Products