Enjoy free shipping on orders over $29.99

US Dollar

0 $0.00

Your cart is empty.

Titanium Anode Mesh with MMO Ruthenium-Iridium Coating and Cathode Electrolytic Mesh Without Coating for Chlor-Alkali Industry or Swimming Pool Cleaning

5.0 Write Review

Free shipping on orders over $29.99

$55.90

$ 25 .99 $25.99

In Stock

Qty.:

About this item

𝘾𝙤𝙢𝙥𝙤𝙨𝙞𝙩𝙞𝙤𝙣: The electrolytic plate is made of DSA type electrode, anode plate coated with MMO precious metal oxide electrocatalytic coating, and industrial pure titanium cathode plate. It can be used in salt water, tap water, sea water and other environments.
𝘼𝙙𝙫𝙖𝙣𝙩𝙖𝙜𝙚𝙨 𝙤𝙛 𝙏𝙞𝙩𝙖𝙣𝙞𝙪𝙢 𝙀𝙡𝙚𝙘𝙩𝙧𝙤𝙙𝙚 𝙈𝙚𝙨𝙝: Titanium mesh uses industrial pure Gr1 titanium as the substrate, with dimensional stability, good electrical conductivity and high corrosion resistance. And the substrate can be recycled and recoated with MMO for reuse.
𝘾𝙝𝙖𝙧𝙖𝙘𝙩𝙚𝙧𝙞𝙨𝙩𝙞𝙘𝙨 𝙤𝙛 𝙍𝙪𝙩𝙝𝙚𝙣𝙞𝙪𝙢-𝙄𝙧𝙞𝙙𝙞𝙪𝙢 𝘾𝙤𝙖𝙩𝙞𝙣𝙜: The surface of titanium anode is coated with ruthenium-iridium by a special process, which has good electrocatalytic performance and resistance to electrolytic oxidation, and can produce better electrolytic reaction than other electrodes, which can provide better conversion efficiency. And has the characteristics of high melting point, high strength and stable electrothermal properties.
𝘼𝙥𝙥𝙡𝙞𝙘𝙖𝙩𝙞𝙤𝙣𝙨: Most used in swimming pool cleaning, water treatment for chlor-alkali industry, hydrogen production by electrolysis of seawater, chlorine production, hypochlorite industry, electrolytic production of sodium hypochlorite, sewage and wastewater treatment, ICCP cathodic Protection, Electrolysis of metals gold silver copper nickel cobalt, electroplating industry, desalination of seawater by electrodialysis, electrolysis of acid and alkaline water.
𝙒𝙝𝙖𝙩 𝙬𝙞𝙡𝙡 𝙔𝙤𝙪 𝙂𝙚𝙩: Two pieces of titanium electrodes, the effective area of cathode and anode both are 100*100*1mm(3.94*3.94*0.04 inches) with titanium terminal of 50mm(1.97 inches), same as the picture.

Product Description

𝑫𝒆𝒕𝒂𝒊𝒍𝒔 𝒂𝒃𝒐𝒖𝒕 𝑻𝒊𝒕𝒂𝒏𝒊𝒖𝒎 𝑨𝒏𝒐𝒅𝒆

Size: 100*100*1mm(3.94*3.94*0.04 inches)

Thickness: 1mm

Terminal: 50mm(1.97 inches)

Our minimum tolerance range is based on international norms and is typically ±0.002 mm.

We also can provide you with customized services, according to the drawings or dimensions provided by the customer.

𝑨𝒑𝒑𝒍𝒊𝒄𝒂𝒕𝒊𝒐𝒏𝒔 𝒐𝒇 𝑻𝒊𝒕𝒂𝒏𝒊𝒖𝒎 𝑨𝒏𝒐𝒅𝒆

Our products are used in chemical industry, metallurgy, water treatment, electroplating, electrolytic organic synthesis, and other electrolytic industries. Mostly used in swimming pool cleaning, water treatment for chlor-alkali industry, hydrogen production by electrolysis of seawater, chlorine production, hypochlorite industry, electrolytic production of sodium hypochlorite, sewage and wastewater treatment, ICCP cathodic Protection, Electrolysis of metals gold silver copper nickel cobalt, electroplating industry, desalination of seawater by electrodialysis, electrolysis of acid and alkaline water.

𝙋𝙧𝙤𝙘𝙚𝙙𝙪𝙧𝙚𝙨 𝙤𝙛 𝙋𝙧𝙤𝙙𝙪𝙘𝙞𝙣𝙜 𝙏𝙞𝙩𝙖𝙣𝙞𝙪𝙢 𝘼𝙣𝙤𝙙𝙚

Choosing Titanium Substrate

Substrate Cutting

Sandblasting

Pickling

Configure Precious Metals

Coating

Sintering

Packaging

𝙏𝙚𝙨𝙩𝙞𝙣𝙜 𝙋𝙧𝙤𝙘𝙚𝙨𝙨

Titanium is a dense hexagonal lattice at room temperature (below 885 degrees), and a body-centered cubic lattice above 885 degrees, with a volume increase of 5.5%.

Titanium alloys can reach 700 to 1200 MPa, and even up to 1400 MPa, so the specific strength of titanium alloys (i.e., the ratio of strength to density), than any other materials are now larger.

𝑮𝒖𝒆𝒔𝒔 𝒚𝒐𝒖'𝒓𝒆 𝒊𝒏𝒕𝒆𝒓𝒆𝒔𝒕𝒆𝒅 !

- Size
  
  100*100*1 mm
- Size
  
  101.6*63.5*1 mm
- Size
  
  101.6*63.5*1 mm
- Material
  
  Mesh
- Material
  
  Plate
- Material
  
  Mesh
- Anode Coating
  
  Ruthenium-Iridium Coating
- Anode Coating
  
  Ruthenium-Iridium Coating
- Anode Coating
  
  Ruthenium-Iridium Coating
- Terminal Size
  
  50*10 mm
- Terminal Size
  
  Length 20mm* Dia 3mm
- Terminal Size
  
  90*10 mm

Shopping Cart