Your cart is empty.
Your cart is empty.Ergonomic design for comfort in a variety of hand positions. Features-Fit 10-speed Force, Rival and Apex and early Red 10-speed levers-If original hood has a textured surface, use BR5934, 35 or 36 Item Specifications-Color:Black
パトラッシュ
Reviewed in Japan on July 15, 2024
通勤・トレーニング用バイクに初代REDを使用しています。壊れないですし、文句ひとつありません。なのでかれこれ15年ほど使っています。ですが、その間にワイヤー交換やブラケットカバーなど消耗品の交換は必要になります。なお本製品など古いパーツ用消耗品はAmazonなどの通販サイトで購入することをお勧めします。先日某Yのつく青い看板の販売店にサードパーティ製でも良いので取り寄せて欲しいと聞きに行ったら、まだそんなポンコツ使っているの？と言いたげな感じに鼻で笑われたので、無言で帰りました。多分そんなユーザーは迷惑客とされてしまいますので、ご注意を。
Josh Wight
Reviewed in the United States on February 29, 2024
Perfect fit, easy installation and they feel amazing 👏 Some say hard to put on, but I had no problem. Sure they're tight but they're supposed to be, and they're tough! 👍🏻
Dan
Reviewed in the United States on December 19, 2024
The new covers slipped on easily.
Marian&David
Reviewed in the United States on September 4, 2022
these hoods fit my 2x10 rival, force and even RED shifters. buying 3x more @$21 for future. they dont line up 100% (more like 95%) to all the lines & shape, vs org hoods, but v good and more than good enough for me.
Ruben
Reviewed in Mexico on May 28, 2022
Buen producto, en su caja original, fácil de instalar.
Romil Rey Daquila
Reviewed in Canada on March 16, 2022
After a bit of struggle, as expected with new brake hoods, these ended up fitting perfectly on to my SRAM S500 levers - nice and snug with everything lined up. The trick is to make sure all the tabs on the hood tuck in properly into the notches on the lever in sequence (you'll understand if you fiddle around with them before installing). My original hoods took a beating with all the riding I have done, so this product help me refresh my bike while saving me from investing in a whole new lever set.Also, kudos to the seller for responding to my shipping inquiry in a very timely manner with the answer I was looking for. I was impressed by that.I am satisfied with the product and the shopping experience.
ivonation
Reviewed in the United States on January 24, 2022
It did fit perfectly on my Apex levers, easy to install.
paolo
Reviewed in Italy on September 4, 2021
Sono originali e montano perfettamente su Sram Rival.Consiglio l’acquisto.Amazon sempre servizio top!!!!
Eric
Reviewed in the United States on August 29, 2021
Many reviews indicate trying to make these work for newer shifters, I doubt they will. They are for the older 10 speed SRAM shifters. The fit is perfect for the correct equipment. I used these for my wife’s 10 speed Rival shifters and will buy another set for my Force shifters. Install took 2 minutes per side. One tip for install, spray isopropyl alcohol on the inside of the hoods before pulling them on. This provides temporary lubrication and let’s you get them properly seated before it evaporates.
MONTAIGNE V.
Reviewed in France on April 27, 2021
Modèle exactement conforme. Assez facile à installer avec 2 crans de blocage à bien positionner.
Amir Hameed
Reviewed in the United States on July 15, 2019
I replaced break lever hoods on my 2011 Trek Madone. Old ones were all worn out. I was worried that it would be hassle to install new hoods. I was wrong. I left them out in the sun for 15 minutes to loosen them up. Used few drops of rubbing alcohol and they slipped right on. They are perfect fit. They feel well built but I will find out over the summer how well the last. So far I am happy about this buy.
D. Harris
Reviewed in the United States on May 7, 2018
These rubber SRAM integrated brake lever hoods are for early Red, Force and Rival models. This is primarily the 10-speed models. These hoods are not for most later 11-speed models. These older-model hoods are exactly what I needed because I have 10-speed SRAM Force levers from 2008 which I'm using only for braking. (My drivetrain is SRAM Red in a TT setup with separate aero shift levers on my aerobars.)The SRAM part number on the box I received is 00.7915.042.000 for the black color that I ordered. The manufacture date was listed as 2018 Wk 01 so they are not "new old stock" but recently manufactured hoods, meaning the rubber is "fresh".Some reviewers have incorrectly stated that the left and right hoods are interchangeable. This is patently false. The truth is that the hoods are symmetrical like a mirror image is. But the outward side of both levers has two holes and the inward side has one hole. These hoods have protrusions to fill these holes. You could force a left hood onto a right lever, but one of the hood's internal rubber protrusions will not align to its expected hole and the result will be a bulging hood where it shouldn't bulge. So please pay attention to the details. The easiest way to tell the left from the right hood is this: The "SRAM" logo is always on the outside of the hood. If the logo is on the right (as you'd face the hood from the bike seat, then it is a right-side hood. If the logo is on the left, it is a left-side hood.I'm glad these older-model (pre-2013) hoods are still available. They work great and are true OEM replacements for the original hoods. Highly recommended if you have older-model SRAM Red, Force or Rival levers.Lastly, the seller for my purchase was "Bicycle Addiction" but Amazon.com fulfilled the order and offered free "prime" shipping.
G-house
Reviewed in the United States on August 29, 2012
Made by SRAM, came in a SRAM box, and fit PERFECTLY over my SRAM RED (2010) levers.Here is some advice for installation:- Turn the hood upside down and pour some rubbing alcohol on the inside.- Then roll the hood around in circles until the alcohol covers the entire interior of the hood.- Shake out the excess alcohol.- Slip hood over the levers with the levers attached to the bars. Make sure you slip them over the correct side. The alcohol will dry up quickly, provide a light amont of tackiness when dry, and will not introduce any rust issues on the levers like water would.- The hood should slip over like a glove, without stretching.Do this once or twice a year, more if you have white hoods. There is no excuse for dirty bar tape and hoods. It's cheap and simple to replace.
Recommended Products
