Your cart is empty.
Your cart is empty.
CGA320 Co2 Tank Direct Adapter to Jet/One Touch/Fizzi Soda Water Machine
How it works:
1.Screw the Nut to a commercial CO2 gas cylinder and tighten it by wrench;
2.The black pin valve screwed into Soda Water machine;
3.Open the valve of the large gas bottle;
4.Done,you can enjoy your sparkling water.
if you want unscrew the pin valve from the machine:
1.Close valve of the large gas bottle;
2.Press button more serval time to drain residual Co2(if you disconnect the coupler directly without this step,the o ring in quick coupler will be blowed out);
3.Disconnect the quick coupler.
IMPORTANT NOTE:
Please kindly read before you ordering or using:
1.Don't use siphon tube Co2 Tanks!! Our unit works with GAS CO2 only, not liquid CO2. liquid CO2 will create a bad taste in your drink.
2.if you want disconnect the coupler,please press the machine button more serval time to drain residual gas,or else the o ring in coupler will be blowed out.
Shawn Grover
Reviewed in the United States on September 30, 2023
The black adapter that connects to your machine has a pin valve that is depressed when you use your soda machine. That pin seals internally with an o-ring that will degrade over time. In my case it failed within 6 months of purchase. You will know you have the problem when gas continues to flow from your injector head, or you might hear extra noise coming from the back of your unit when you charge your drink. To replace it, the piece where the pin valve sticks out can be unscrewed with a 6mm allen wrench. Take the old o-ring off, replace, and reassemble. To find the replacement o-ring, look here: https://www.amazon.com/Vavoger-Adapter-Machine-Replacement-Cylinder/dp/B0C3H8C7P4/ref=sr_1_5?crid=28P9SDRY1KU8L&keywords=tr21-4%2Bblack%2Badapter%2Bo-ring&qid=1696082853&sprefix=tr21-4%2Bblack%2Badapter%2Bo-rin%2Caps%2C152&sr=8-5&th=1
Daniel J Adkins
Reviewed in the United States on October 23, 2023
Works like it should no problems
Mariko
Reviewed in the United States on January 31, 2023
1/31/23: Brought the tank and this connector and Was excited to connect to my sodastream cylinders. When I filled up the gas tank and tried to connect, the air was leaking from the quick release area. Try to see if I can tighten it up a bit but it didn’t work.Return and asked for replacement. Let see if the next one would work.2/1/23: The replacement came in today. And I hooked up and no leak so far. Let wait for few days to see if continue work well. So 5 stars for the delivery of replacement.
Robert C.
Reviewed in the United States on January 30, 2023
Solidly made and easy to use. Note that hose ends are Metric M10 threads: Larger CO2 tanks are very high pressure and you will really want to use a CO2 regulator (with adapter fittings to connect to the regulator) with Soda Stream carbonators to keep the CO2 gas under 60 PSI. Otherwise the Soda Stream's pressure relief valve will vent off your CO2 gas, to let you know when to stop adding gas.
Rick A Buyer
Reviewed in the United States on March 22, 2021
Working great, no issues!
Kari Nelson
Reviewed in the United States on January 12, 2021
The connector to the Soda Stream as well as the fitting from the connector to the hose both leak. I would avoid this product.
Customer
Reviewed in the United States on September 9, 2020
Good quality, materials seem durable to deal with high tank pressure
mdo_01
Reviewed in the United States on September 1, 2020
Just got this yesterday. The piece that screws into the back of the Sodastream is solid metal. It has a quick release that seems a little flimsy. The hose seems sturdy enough. I would prefer to have a regulator upstream, but the fittings are not typical. I went to go to an Airgas store, but they didn't have any fittings for this. (And were very skeptical and dismissive about it, frankly) OK. Gloves on. Hearing protection in. Safety goggles on. I hooked it up and opened the tank minimally. I mean JUST until I got pressure and no more. It worked fine. I got a weird taste in the club soda HOWEVER I can't swear it's from this product. Might be brand new hose...might be the CO2. The tank was bought on Craigslist and was already filled with God knows what. I will swap the tank and use this product for a while and update my review. But...so far so good.
Recommended Products
