Your cart is empty.
Your cart is empty.Puig 9462W Winds. New Generation Honda Rebel 500 17-21 C/Clear
quang m
Reviewed in the United States on February 26, 2025
Very satisfied and fit perfectly for my 2019 cmx500, glad I bought it, protect against wind to the body and I like the way it looks
Heinle Viktor
Reviewed in Germany on February 23, 2025
Sehr gut. das wichtigste- ABE ist im Lieferumfang dabei
Jennifer Steingart
Reviewed in the United States on January 31, 2025
Great product. I am new to riding. This helped a lot with the wind. Good quality and easy to install!
John Mittler
Reviewed in the United States on September 27, 2024
Easy installation. I have a SE model of the Rebel. I had to remove the decorative cowl around the headlight to get the shield to fit, but it was worth it. Keeps the wind off my chest which was considerable at higher speeds.
Miguel
Reviewed in Spain on August 6, 2024
Perfecta. Quita todo el viento del cuerpo y está perfectamente diseñada para la moto.
Wuerzel
Reviewed in Canada on June 5, 2024
Easy and quick mounting 10 min install. Relieves wind pressure from chest area and lower helmet during long and fast rides. Can get a little stuffy during hot summer days.
Jesse Griffith
Reviewed in the United States on March 24, 2024
I'm 5'9, and replaced the original handlebars on my Honda Rebel 500 with ones a little higher and further back, so my posture feels more upright/laid back. The windshield was easy to install and reduced the wind on my body and chest significantly. I usually don't go faster than 65 mph but going 70 - 75 with this was easy. And it looks good (I feel like some fairings/windscreens make the bike look goofy).HOWEVER, the buffeting on my helmet was borderline nauseating. Even tried tightening my helmet as much as I could but it was just too much. It's not adjustable, as the mounts are fixed at an angle for the screws on the bars, so you can't really change the angle. It was a particularly windy day I tried it, but even before on windy days it didn't rattle my head like this. The diverted wind seemed to hit right at eye level for me. If it wasn't for this I would say it was a success for me but I just can't ride like that.UPDATE: I cut it down so the diverted air is lower and now it works great. Clean hits my helmet like it normally would and is diverted from my chest and body. Riding on the highway is more pleasant. Looks good too.Wind around my helmet is slightly louder but earplugs are a good idea anyway.
Jose M.
Reviewed in the United States on October 10, 2024
Looks great and simple to install but a little too short to keep the wind off my wife’s helmet and she is 5’3”.
Mick
Reviewed in Australia on August 3, 2023
We installed this in my Honda CMX1100 without any issues. Secure firmest and does provide a good amount of wind deflection from the chest. Also looks good.
mike
Reviewed in the United States on June 6, 2023
I installed it on my 2023 Honda Rebel 500 ABS SE. According to Amazon's description this windscreen should not fit my bike. Not only does it fit just fine but it also can be mounted with the headlight cowl still on. You need to do some minor adjustment to the bracket but it takes no additional tools and is very easy with patience. I did not like the rubber back plate used to attach the windscreen to the brackets. They are cheaply made and popped out twice while riding from the wind vibration. I replaced them with lock nuts and nylon washers. Now there is zero vibration and the windscreen is much more secure.
Alex
Reviewed in Canada on June 20, 2023
Like you, I read many reviews looking to sway my judgment on whether to buy this windshield. There were two main concerns that seemed most common:1) increased wind noise/buffeting due to wind hitting helmet2) being too tall and potential height issuesFor 1), from my test runs I've just done, I can attest that the wind noise actually improved with this windshield. Especially past 120 km/h. There are probably two reasons for the reviews that complain of this.. Either 1) their windshield was not angled properly (needs to be as far forward as possible, not angled back) or 2) because of the decreased noise down low, the noise up top on the helmet seems more noticeable. I tested this by tucking, sitting normally, and standing on the pegs. The noise was quietest tucking behind the shield, then while sitting I could tell the wind was hitting the top 3/4 of the helmet which introduced wind noise which at first seemed loud, but then I realized it was only because the wind wasn't coming from the bottom and it made it seem more noticeable. Standing on the pegs was identical to not having the shield at all and I can tell you it's the loudest. I was also able to adjust the angle of the shield while riding and could intentionally create buffeting when pulling the shield back, so having it as far forward is key.For 2), I'm 6 feet tall and all torso. I had no issues with buffeting or any of that sort, and it worked incredibly well at high speeds. And for me, this was it's only downside.. That it worked too well. It was actually able to block so much wind from hitting my torso, I started noticing that I was overheating and sweating under my jacket. Something that was never an issue before.So in summary, if you travel the highway a lot, this thing works incredibly well. If you like getting slapped in the face by wind, or don't like the windshield styling, it's probably not for you.
Fred W.
Reviewed in the United States on May 6, 2023
Fits well. Had to do a little tweaking to brackets to fit since I have the headlight cowling but easily made it work. Looks good and isn’t too big but provides the right amount of wind protection. I can easily do 80+ mph for extended periods and have no wind pull on my chest. Before if I hit over 80 I could only do it for short spurts without wanting to back it down to 60ish. Was on the fence because I think they take away from the look of a bike but after having it on I wouldn’t rode without now. 💯 worth it.
Krystal
Reviewed in the United States on January 22, 2023
The windscreen itself works great and will fit over the stock headlight shroud. The hardware it comes with are the worst quality bolts I've ever worked with. The button head allen bolt stripped out well before even reaching 15 ft. lbs. when the required torque is 22 ft. lbs. Get some actual quality hardware separately and save yourself some headache especially if you plan to remove the windscreen from time to time. Earlier versions of this set came with decent quality bolts, seems they dropped the quality a bit to save some cost. Absolutely awful.
Recommended Products
