Super easy to install and convenient

Product is perfect fit for my space was a little tricky to assemble as no marking on the parts to identify them.But really happy with it sturdy and very nice to look at.

Initial thoughts:Extremely well engineered and surprisingly heavy/sturdy. Fairly straightforward installation with some caveats to material and construction.Upon receipt of this item, I was initially surprised by the weight of the box it came in. It was packed quite nicely, but beware it’s 70+ pounds you’ll need a little bit of space as there are quite a few parts. The instructions are decent be particularly mindful about the shading on the instructions as dark or white as the triangle pieces are extremely similar and are not labeled at all as far as I can tell. Please note this is constructed upside down and you will need to flip it over at the end. If you’re trying to construct this in a small space, I could see this being a challenge. Also, I would be mindful about the surface upon which you build this as this is a very dense particleboard material with a very thin layer of white paint. I found the edges to be pretty delicate, so be mindful about scraping them or constructing this on harder surfaces. Lastly, if you make this on a carpet or rug, it will seemingly pick up all the dust and pet hair, lol.There is one step in the instruction where you have to place the top that requests two people. While that would be ideal, it’s not necessary. I just turned the unit on its side to complete this step.Interestingly the majority of material is really good and the components are quite nice. I would suggest a manufacturer add an extra screw or two and I am shocked at the plastic shelf holders for the bottom shelf. Everything else is so heavy duty…. These seemingly cheap plastic shelf pegs just seem incongruent with the other hardware included with this piece.All you need to construct this isa Phillips screwdriver, I would strongly suggest a drill/screwdriver with a torque setting so you don’t strip anything out. You will need a hammer or a mallet to tap two plastic dowels in. I got this done by myself in about 40-45 minutes give or take. It would go a lot faster with two people.I do like the fact there is a cut out for baseboards. I think this is gonna work fine in most applications and will actually let the piece set more flush with the wall in most cases. Unfortunately, we have a baseboard as well as quarter round so would need to make an additional modification if we wanted it to sit closer to the wall (see pic). There is an included bracket and screw for adhering the top to a wall stud so it doesn’t tip over. You’re gonna need a step stool for that.All in all, it is a really nice and honestly over built piece given the fact it probably isn’t typically going to hold anything heavy or large. For something that people are going to hang coats and store shoes, etc. it’s going to be fantastically durable for that application. Due to its material, I would not suggest this being outside or in wet conditions. I could almost promise you this particleboard material will swell so if you are going to put wet towels, clothing, or shoes, I would probably caulk the edges or paint all unfinished sides/edges prior to assembly.UPDATE: I am a week post build and wanted to make you guys aware there is a relatively significant Wood smell to this product. I have this in an app approximately 80 to 85 ft.² bathroom and the smell of this product is significant. I know it is probably offgassing and will likely reduce after time, but if you have this in a smaller space or our sensitive to smells, I just wanted to make you aware. I would think if you set these outside for sometime or ran a primer over all the unfinished sides you would reduce this however, I did not and the room smells like particleboard. I just wanted to make you guys aware.

Pleasantly surprised

The pieces are not labeled which was annoying and took more time to sort out. I’m happy that none of the parts came scratched etc.

Perfect little corner cabinet rack. Very easy to assemble, even on your own. Took me about an hour. The only issue is that the total measurement is slightly off. According to the diagram, the length/width of the top piece is 20.8 inches. If this were the case, this would fit perfectly in the corner which I had planned. Unfortunately, the true measurement is 21.5 inches. The piece stills fits somewhat, but sits awkwardly and juts out due to the lip on the top. I am a perfectionist, so this little imperfection annoys me. If the measurements were as noted, this would fit near perfectly in the corner.Other than this, it seems sturdy, and looks great for what it is.

It's small, but that's exactly what I was looking for. it does not sit flush on the wall, but it can honestly be my house walls that are not straight. Looks very sturdy, also thanks to the super long and thick hardware they provide for mounting. It's true that labels/numbers on the pieces will help assemble, but with a little bit of attention to the pictures you can easily figure out which piece you need (there are not many anyway)

The hall tree looks great. It was easy to assemble in less than an hour. Two of the pieces had broken areas/imperfections but once put together, they can't be seen. I also wish the hooks were a little more sturdy. The screws that hold them in are pretty small, so I don't trust them holding my middle schooler's backpack. I shopped for something like this for a couple weeks and Amazon definitely had the best price (identical item through Kohl's was almost $50 more). Overall I'm happy with the value and the way it looks.

So happy I bought this! It is beautiful, plenty of room for anything but small enough to not be in your way love it very much. Only issue was the instructions and the pieces are not labeled so it was a bit of a puzzle but in the end worth it to

My hubby and I moved from warm CA to colder Georgia and found we needed a place to store the multiple layers of clothing we were wearing. This was perfect! It was easy to assemble, looks great, and holds our winter wear. I'm careful(ish) with the coat hooks, due to other reviews, but have had no trouble. As you can see, we usually have 2 or more items on each hook. It's been a cold winter so far this year. The top section is perfect for hats and gloves and there is shoe storage at the bottom. I absolutely love it!

Color looks great, sturdy when anchored to the wall. Triangular shapes shelves don’t hold much but are great for a couple pairs of shoes or small decor items. Hanging items from each hook they will overlap. It’s more for hanging one or two items occasionally and isn’t ideal for a lot of coats/backpacks, handbags etc. Great space saving design for a mudroom or entryway.Con: The parts are NOT labeled. Be sure to lay everything out beforehand and match up the holes perfectly with what you see in the directions.

Challenging but instructions were clear. Just a bit awkward since it is a very tall piece of furniture. Well worth the effort. It’s beautiful and was exactly what I needed for my tiny entryway that had no place to put jackets and shoes.

This is gorgeous! I love it, fits wonderfully in the corner of our house. All parts were included and lined up perfectly in the correct holes. It's made of composite would, but at least not a flaky type. It seems sturdy and well made. It is not hard to put together, but the instructions could be a little clearer, you just need to stop and think about what pieces should go where and it will mad. Overall I love it! Great purchase