Your cart is empty.
Your cart is empty.Permatex PermaPoxy 5 Minute Plastic Weld is a structural adhesive designed for general purpose bonding of a wide variety of materials. This weld forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. A fast curing product with gelling of mixed adhesive in 5 – 6 minutes and fixturing in 9 – 10 minutes, it bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature, with a cream appearance. Gap filling to 0.125 inch, with a permanent strength up to 3500 PSI. Temperature range of -60 degrees Fahrenheit to 250 degrees Fahrenheit, with good chemical resistance and water resistance. NOTE: Will not bond most polyethylene or polypropylene plastics. Permatex offers convenient solutions for a wide range of bonding applications. Available in many packaging configurations, Permatex epoxies are versatile and easy-to-use. From general-purpose to material-specific, Permatex offers a formulation that will work for you.
Pawsrdog
Reviewed in the United States on March 10, 2025
Dries fast and hard. I used it to repair some molding on a honda quad. It seems to hold up to buffalo ny winters. Make sure to rough up the surface your applying it to. That helps it to grip the material to the epoxy.
DJW
Reviewed in Australia on March 1, 2025
Works well bonding ABS
Nancy Stevenson
Reviewed in the United States on February 25, 2025
This is the best plastic welder glue out today. Unfortunately, I purchased from a seller who has kept the product too long. There is no way this product should be dried up and I bought it January 21. Yes, DO NOT PURCHASE FROM THESE PEOPLE HERE!!!
Hammer
Reviewed in the United States on August 26, 2024
I used this plastic glue to fix an old Electrolux sweeper cover. The cover became brittle with age and broke when removing. I used this glue to repair the cover. I roughed up the broken part joints with sandpaper for a better bond. it held tight after a day of drying. The cover is stressed during installation and I worried about it breaking again. Nope, it held up. This plastic glue is great and saved my vacuum!Note: The header says black, but the glue I received was tan in color. No big deal for me, but could be misleading if you really wanted black glue.
jaroslav horvath
Reviewed in the United Kingdom on October 18, 2023
easy to use, stick to anything,hold like weld, need clean surface before gluing
K. Inouye
Reviewed in the United States on January 4, 2023
Been using this for 3d printed objects done in two parts (less support structure needed that way), mostly in PLA+, and it works great.
J. Martin
Reviewed in the United States on April 9, 2022
This stuff works great (as long it is on compatible plastic as some plastics it will just slide off of). I have used Plastic Weld (PW) sometimes with "bondo grate (metal)" suspended in it to make strong repairs. But once you open this glue it seems to degrade very quickly. If you are are trying to reuse a "tube", I suggest make a test blob and see if it hardens (20 min). I just glued some some plastic parts with old opened PW and it did not harden, even worse the "magic" that bonds it to the plastic kept eating and turned the plastic parts into goo!
Denis albert
Reviewed in Canada on May 19, 2021
Pour réparer une fissure de 5 pouces sur un petit bateaux de 14 pied coleman et ça très bien réussi.
Billy Harrison
Reviewed in the United States on January 28, 2020
I've had an auto shop for 25 years. I've been using this product for most of that time. It has changed very little over those years. It sets up in about 15 minutes on a warm dry day and can be sanded in 30 minutes. A properly done repair will last for years. When you first open the 2 part tube, go ahead and squirt out a little and throw it away. The first product out of the tube does not make a good mix. After that, no problems. Has a very good shelf life. I use a lot but have kept the same tube for a couple of months on occasion. If you are repairing broken plastic or bonding plastic to metal, it will do the job.
RunMore
Reviewed in the United States on October 5, 2019
Works great. Bonds and adheres superbly. The issue is with the cap. It's terrible. It doesn't stay on or seal out air. I tried taping it on but a week later tried using again and one side was clogged and dried to the point it couldn't be used. Worst product engineering I've seen in a long time. Great adhesive, terrible execution.
Customer
Reviewed in Canada on August 21, 2018
I bought this item to fix a crack on my bumper cover.worked like a champ! very satisfied.
steph
Reviewed in France on April 3, 2017
Pour l'instant, je n'ai pas trouvé de colle plastique aussi remarquablement efficace. Comme son nom l'indique, elle ne colle pas: elle soude. Totalement satisfait.
😅
Reviewed in the United States on August 1, 2015
Very fast, strong, stable bond. Was much faster at gelling, setting, and becoming useable than JB Weld Plastic Bonder, which had previously failed twice for me.Concerns: Capping the syringe for reuse is more difficult than JB Weld's syringe; air bubbles in the syringe (possibly to low product viscosity) make standing the syringe for a while before opening, and purging important for re-useability; strong solvent vapors require using this outdoors or in a ventilated shop.Strengths: Fast gelling, setting, and develops final strength quickly; easily mixed with provided tray and stirrer, or with whatever you have on hand; due to quick gelling, very easy to work into gaps after mixing until its setting time (fast, no wait); bonds a variety of hard-to-bond-to materials to common materials (plastics to steel); sets hard.Overall, another high-quality Permatex product that they can be happy to put their name on.
Recommended Products
$14.99
$ 7 .99 $7.99
$32.48
$ 15 .99 $15.99
$73.00
$ 31 .99 $31.99