Your cart is empty.
Your cart is empty.Product Description
519-KSH2223K
About NICHE
NICHE specializes in the highest quality Powersports replacement parts. Our parts meet or exceed the quality of the original parts that come with your machine. Some of the NICHE product categories include cylinders, brake pads, axles, off-road mirrors, and drive chains. Let NICHE components fix your machine today!
NICHE Front Shock Absorber Set 519-KSH2223K
- Includes: Shock Absorber Front Set
- Compatible with the following brands: Polaris
- Compatible with the following models: RZR 900,RZR XP 900, RZR XP 4 900
- Replaces for the following OEM MPN's: 7043795,7043921,7043597,7043777,7043778,7043917
Whats Included:
- 2 performance shock absorbers
- 2 sets of mounting hardware
- 1 spring adjustment tool
- 1 rebound adjustment tool
Adjustment
Compression and Rebound Damping
- There is an adjustment dial at the top of the fluid reservoir, turning this will either make the suspension stiffer or softer.
- To make the suspension softer, turn the dial counter clockwise to make the suspension stiffer turn the dial clockwise.
- It is important to find the right compression damping level for you and your machine, consider the terrain you will typically be riding and adjust accordingly.
- To determine the standard setting, turn the dial clockwise until it will not move, then turn the dial all the way counter clockwise, counting the clicks. Divide the number of clicks by 2 and turn the dial back clockwise by that number of clicks.
Adjusting Rebound Damping
- There is an adjustment at the bottom of your shock absorber, turning this will increase or decrease the rebound damping.
- Turning the bolt clockwise will make the shock rebound slower, turning counterclockwise will make the shock rebound faster
- It is important to find the right rebound damping, this will be the point where your shock rebounds from an impact fast enough to recover for the next impact, but not so fast as to bounce the rider around excessively or break traction. This will take testing to find the setting that is right for your machine, riders, and terrain.
Adjusting Riding Height
- You can use the provided adjustment tool to increase or decrease the spring preload. Increasing preload will increase the ride height.
- The optimal ride height will depend on the exact vehicle and rider, including riding conditions and configuration.
- It is important to check ride height before operating the vehicle. To check this, measure from the ground to the lowest point in the chassis or skid plate in both the front and rear. The front of your vehicle should sit 1/2 to 1 inch higher than the rear.
Michael Rohaley
Reviewed in the United States on December 27, 2024
Repla ed Fox Podiums with these. The Niche have adjustment for compression and rebound, which is nice. The Fox shocks only had a compression adjustment. New Fox Podiums were $3,600 for all 4. Replaced all 4 with Niche for $1,200. Rides great and 1/3 the cost!
Recommended Products
$289.60
$ 99 .00 $99.00
$22.14
$ 10 .99 $10.99
$292.13
$ 99 .00 $99.00