Your cart is empty.
Your cart is empty.The WARN 72631 Solenoid Replacement is a service replacement part with an upright terminal. This is a genuine WARN service replacement solenoid so don't be fooled by cheap knock-offs. This is the top of line product for numerous WARN Winch Models, Including: M6000, M8000, M8000S, XD9000, XD9000i, 9.5ti, VR 8000, 10000, 12000, 16.5ti, 16.5ti-S. It replaces 28396.
Brad Z.
Reviewed in Canada on February 27, 2025
This doesn’t come with the nuts so you’ll have to source them somewhere else.
Jere E. VanDomelen
Reviewed in the United States on September 16, 2024
Not that it showed any nuts, washers, etc., but a bit of a hassle rounding them up. Comes with NONE.While it probably doesn't matter wiring wise, no schematic either. I guess the activation circuit polarity doesn't matter? I'll research that.I recall it being $29, so I expected a bit more complete item.
Matthew Oestreich
Reviewed in the United States on June 19, 2024
Easy install and worked great. Mounting holes were different on the factor warm but it fits
Mark graves
Reviewed in Canada on March 28, 2024
I’m sure the signal coil was defective, over headed first time, maybe a couple minuets of use and now won’t engage, figuring out how to get a replacement :(
J
Reviewed in the United States on July 17, 2023
This solenoid worked perfectly on my 22 JLURXR with Warn winch I installed so I could hook up my #4 aux switch to power it on and not have it powered on all the time directly connected to the battery.
Seth
Reviewed in Canada on March 24, 2023
Do not buy any other solenoids ( went through two sets ) there all short duty ford starter solenoids , these are continuous duty genuine warn solenoids !
David
Reviewed in the United States on June 12, 2022
Just like the original. They even had the Warn logo printed on them. Last year I purchased a set of knockoff relays and two of them already failed. This time I decided to go with OEM relays. So far they are great. I expect they will last much longer than the knockoffs. If any of them fail prematurely, I’ll update this review.
Customer
Reviewed in Canada on October 30, 2022
Good price great fit works as advertised
TrRod
Reviewed in Canada on July 6, 2020
Came in factory bag with Warn logo on bag and item. Seems to work fine. Fast shipping 3.5 days to Vancouver Isl.
Pete
Reviewed in the United States on April 23, 2020
These were a direct replacement for the four solenoids in my 1970’s Warm 8274, Easy to install because all wiring and jumpers are the same as original. I upgraded to 2 AWG wire from the solenoids to the motor. I had ordered the new style solenoids from Warn but they are a different shape and require a new backup plate and different copper jumper links. It’s a lot of work and money to retrofit to the new design. These value priced Chinese solenoids worked perfectly (no grounding problems and wired exactly like the original design). Time will tell if they will work in the long run but solenoids are not complicated electronics. My old ones lasted over forty years and only an electrical fire from engine ruined them. I think these will work fine and are so easy to install.
JAY ARRE
Reviewed in the United States on May 28, 2019
NOT WARN - DOES NOT FIT WITHOUT MODIFICATIONS. Clearly not Warn quality. Can’t imagine putting junk like this in my expensive Warn winch. Real Warn solenoid weighs 287g - this replacement part weighs 249g. Might seem minor but to me it’s a huge indicator that these have been manufactured as cheaply as possible. I’ll gladly change this to a glowing 5 star review if I’m overnighted genuine warn replacements. Since that’s what is being advertised in the first place... The picture in the ad even shows a Warn logo.After hearing nothing from the seller after several days I returned the solenoids they sent. I found a another company online (Montana Jacks Outpost) and bought what I needed from them. They sent the correct parts in sealed Warn bags. Fast free shipping and fair prices. I strongly recommend anyone buy from them instead of these cheap knock-offs.
donr100
Reviewed in the United States on June 12, 2017
These solenoids work great but did give me some heartburn. I only needed to replace one and it didn't work when wired like the original. In fact, NONE of them worked when wired as the original. I discovered that the switch body/metal mount does not work as a ground like every other solenoid I've ever installed on anything. There are two small poles on the switch and one is the "hot" pole to activate the solenoid- the other actually has to be wired to ground for the switch to work. Many Ford solenoids have that 2nd small pole and it is used to activate a light that indicates "starter engaged". That pole is never used in most solenoid applications. After discovering that none of these 4 solenoids worked when grounded to the mount, I almost returned them. I decided to try one with the second pole to ground and it worked. There's no info sheet or wiring diagram included- so it's all seat of the pants troubleshooting. Once I figured that out they work great.
Hans
Reviewed in the United States on January 22, 2014
I used this for 80's jeep winch control which blew up by a sort inside the the motor but i got the motor fixed and had to replace the solenoids. These are smaller than what i had but they work like a charm. Good apm rating, heavy duty and easy to work with. I had to make some new cables and fully modify the motor driver unit but these worked fine.
Recommended Products
