Shopping Cart

Your cart is empty.

Your cart is empty.

Manual Curved Screen Printing Machine Cylinder Press Printer for Bottle Tube for 170mm Dia Cylindrical Conical Curved Screen Printing Machine Press Printer for Pens Rods Tubes

5.0 Write Review
Free shipping on orders over $29.99

$115.99

$ 53 .99 $53.99

In Stock

About this item

  • 【Left and Right Push-pull Structure】This machine adopts left and right push-pull structure; the installation part can be adjusted according to the need, suitable for left or right hand operation; suitable for printing height 200mm; patterns within 150mm in length; suitable for the use of one kind of stencil with 260*450mm outer diameter and 35mm thickness.
  • 【Mounting Aluminum Bar】The printing frame of the substrate is designed to move back and forth, and the three fixed aluminum bars at the bottom are mounted directly on the base. The aluminum strips can be moved left and right 290 mm; positioning bracket mounting strips. The three mounting strips can be moved left and right as needed, and they are locked in 19 U-shaped holes in the front and back of the base to ensure accurate positioning of the mounting strips.
  • 【Adjust the Height】This machine adjusts and positions the height of the rear main frame. According to the height of the substrate, the rear main frame is adjusted up and down by adjusting the columnar screw. The adjustment range of up and down is 200mm. It can print cylindrical and conical products with a diameter of 170 mm.
  • 【Rollers】Using three sets of substrate placement rollers, respectively, metal bearing rollers (diameter 19 mm); nylon bearing rollers (diameter 25 mm); plastic bearing rollers (diameter 50 mm), users can replace as needed. The three rollers can be mounted on both the main frame and the accessory frame. The bearing mounting frame is fixed directly in the mounting hole of the aluminum bar and can be moved up and down 160mm according to the height of the substrate.
  • 【Mounting Bar Displacement】Loosen the two screws of the mounting bar, push the mounting bar to the long hole at the back of the body, move the mounting bar left and right, then move the mounting bar to the fixed U-shaped slot and tighten the two screws to finish positioning.
  • 【Additional Mounting Frame】The bearing is removed from the original main mounting frame and the additional mounting frame is fixed directly to the main mounting frame with screws, which is mainly used for printing of tapered products. The additional mounting bracket can be moved up and down by 20 mm.


Using Method:

1. Install the screen frame and adjust to the suitable height, install the handle position according to using habit.

2.Install the squeegee and fix it at a distance of 1-2 cm from the pattern.

3.Adjust the position of the printing frame and roller bearing, place the printing object on wheel and leave some spac between the screen frame. Make sure the printing object if line up with the squeegee.

4. Adjust the screen frame position and pour out ink.

Features:

1.This machine is mainly used for cylindrical and conical products; such as cylindrical, conical products made of various plastic, glass, metal materials, including various packaging bottles such as wine bottles, medicine bottles, cosmetic bottles, etc, Mugs, beer mugs, wine glasses and other cups; glass tubes, pens, ballpoint pens, fishing rods, bats and other small cylindrical products.

2.For cylindrical and conical products, the printing surface has large depressions or protrusions, and there are non-planar pits in the printing surface, which is not suitable for printing by this machine.

3.This curved screen printing machine is mainly used for printing cylindrical and conical products with a diameter of less than 170 mm.