Your cart is empty.
Your cart is empty.The Makita 39" Plunge Saw Guide Rail (199140-0), when used with a Makita Plunge Circular Saw (SP6000) is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts. For use with the Makita 6-1/2 in. Plunge Circular Saws (models SP6000K/K1 and SP6000J/J1).
Jan Fridell
Reviewed in Sweden on February 25, 2025
Fits perfectly in my plans
Jam teunkens
Reviewed in Belgium on February 16, 2025
Bon
Charles Foster
Reviewed in the United States on January 19, 2025
Per usual Makita has gone above and beyond in quality and precision. Has grip on the bottom so you aren’t required to clamp it down.
Jordi P
Reviewed in Spain on January 18, 2025
La guía está muy bien y es imprescindible para cortes rectos. Se ve de calidad y a menor precio que otras guías.
Jose Velez
Reviewed in the United States on February 5, 2024
Perfect cuts and strong and durable
Jenny Bradley
Reviewed in the United States on December 28, 2024
This shorter rail comes in handy all of the time. Most of my cuts are not very long and this makes it easy to manage.
Thomas B.
Reviewed in Germany on December 11, 2024
Die Schiene ist für kleinere Arbeiten gedacht, eine 1400 oder gar 1500mm Schiene wäre mir zu groß, eine 800er allerdings schon wieder zu klein gewesen. Die ist also recht handlich und praktisch. Da ich sie von Amazon Warehouse bezogen habe ist der Preis sehr attraktiv gewesen, auch wenn ich beim Auspacken ein wenig gezittert habe da ich nicht wußte, ob die Lippe schon angebracht und noch intakt war. Ist in diesem Fall aber so gewesen. Also alles prima und von mir volle Sternenzahl!
Ashley
Reviewed in the United States on August 14, 2023
I bought the whole setup for my husband and he absolutely loves it. He says it makes cutting very easy and quick. He highly recommends!
Snowman
Reviewed in Canada on October 22, 2023
Used with a 120V Makita plunge/track saw.I combine several of these (I have 4 different lengths) with the Makita splice strips to get a variety of lengths. I have used up to 16 foot runs (for long perimeter board cuts on a composite deck picture frame style install) and obtained laser-straight cuts that look very good. It goes without saying that shorter lengths even easier as there is no splice.One thing to note is that these come with soft sponge rubber strips on the bottom that are what hold them in place ... they work amazingly well not needing any other adhesion (at least on Timbertech boards). On the long runs I still added a bit of Gorilla tape just to be sure I didn't get a shift, but that was probably overkill.I bought the Makita bags to carry these, and protect them, and they work well. However, the ends are quite sharp and subject to impact denting - so I also 3D printed some end caps that I put on as well just for good measure (a variety of different ones are available on the various STL free sites). These end caps can also be purchased pre-made online if you search a bit. Combining these with the Makita (fit Festool as well apparently) plunge saw largely eliminates the need for my circular/table saw, and in my opinion is definitely a lot safer.
Jason
Reviewed in the United States on September 7, 2022
Accurate cutting easy to use and value for money
v1c1ous1
Reviewed in the United States on October 20, 2021
I'm admittedly a Makita fan boy, but their cordless track saw and guide rail setup is amazing. Both work great, cut super clean and straight as an arrow. The track sets up easily, just make sire your saw is zero'd out, and rip through the rubber edge guide before your first cut. After that it's smooth sailing. Can't wait to get some longer track to go with this one.
OlatheSmartHomeDad
Reviewed in the United States on January 16, 2020
I paid $14 a piece for these on a freak sale. Excellent value at that price! This is a smaller track but effective for those smaller cuts for which the 55 or 108" are just much too long. Typically good Makita quality.
B. Volkert
Reviewed in the United States on April 17, 2020
I recently bought the Makita SP6000J1 Track Saw. I added the 39" track after reading a couple of reviews for various brands of saw in which the reviewers commented that the shorter length track was the most used piece of track they owned. My experience has been similar. Having excess track hanging out at the ends presents a risk of knocking the track off the work or bench and likely ruining the work, track, and saw. Keeping it as short as practical reduces those risks.The Makita SP6000J1 Track Saw can be purchased with the 55" Track and that is what I did and recommend. I also bought a second 55" track so I can rip plywood. As other reviewers noted, having the 39" version is frequently handy for the shorter cuts; but, I also find it convenient for ripping stock that is less than 7 ft long by adding it to a 55" section to produce a 94" track facilitating an 84" cut.There is a lot of value in this line of product. I wish I'd purchased the track saw stuff a long time ago.
Recommended Products
$346.78
$ 99 .00 $99.00