Magura MT5e Scheibenbremse VR/HR Ausführung Schalter: HIGO-Schliesser, Bicycle Brake, Unisex-Adult, Black, One Size

Brakes come pre bled and you can instantly throw it on the bike and it works great. For a clean setup I’d suggest cutting the line to fit your bike than re bleeding. THEY WORK FOR SURRONS AND TALARIAS!! This isn’t a kit you need to buy 2 of the brakes. You just flip the brake upside down or upside up and it’s left/right brake.

Fantásticos frenos hidráulicos de 4 pistones.Los Mt5e tienen conexión de 2 pines para colocarlos en patinetes.Has de saber que versión comprar para tu patín, si la versión closser o oppener del contacto.

Impossible to adjust the brakes- non functional

I always am nervous about mineral oil brakes. These are no exception. They are a pain to bleed, and the break-in time is increased. These stop well once adjusted, and modulation is fantastic. Not particularly adjustable, and the levers are ridiculously large. But, they look good and stop well. I may end up with aftermarket lever blades because these remind me of a 1988 xr200 brake lever.

Comes pre-bleed. No need to bleed these breaks.Great power and performance.Love the ease of installation.I purchased the individual piston break pads instead of using the dual brake pads the come with the pistons. Much better control and power using the individual brake pads than the dual brake pads that come with the brake pistons.Love the ease of brake pad installation with these pistons. Easy to install and easy to remove..Piston alignment is a cinch. I recommend using a piston gap/alignment tool to align the position to the break disk to make the perfect touch free gap.Hand break responsive is excellent.I love having different break pad options.— Gold “Race” Pads— Green “Race Pads— Gray “Performance” Pads

Endlich einmal ein Komplettpaket einer Scheibenbremse mit Schaltkontakt für ein E-bike. Die Bremsleitung ist für Magura sehr gut. Endlich ist der externe Bremsschalter am Bremshebel für eine Umrüstung der Bremse bei E-bikes Vergangenheit.

You can tell it's a quality item. Well packaged. Took 13 days to get here but it comes from Germany I think and it arrived early. Winter time now and haven't tried it, but I bought it under good recommdations

These hydraulic brakes are absolutely fantastic! The stopping power is incredible, providing smooth, reliable performance even on steep descents and in wet conditions. The modulation is perfect, allowing precise control without feeling too grabby or too soft. Installation was straightforward, and the build quality is top-notch, with durable materials that inspire confidence. They’ve completely transformed the feel of my ride, making it safer and more enjoyable. Whether you’re a casual rider or a hardcore cyclist, these brakes are a must-have upgrade. Highly recommend!

The cut off for the motor will not fit my Bafang motor. Useless. Does not specify in the description.

Long review! These Magura Mt5e brakes are definitely worth the upgrade. Along with buying the brakes on Amazon I also purchased 2 new Magura rotors. Magura’s highly 'recommend' (but not completely necessary) using their 2mm thick rotors because their wear limit is 1.8mm thick. Most other rotors sold start at 1.8mm. My front is 180mm disc and rear is 160mm disc. Magura brake pistons are built to handle the 1.8mm wear limit. If your pads are worn down to the bare minimum and the rotor is at 1.8mm or thinner the pistons could come out of the caliper. Even bike shops will tell you its recommend to use 2mm but not completely necessary. There are even thicker rotors out there you could use but you have to go off that rotors wear limit. After doing the Magura recommend burn/break-in, these brakes perform flawlessly. I did adjust both levers to my preferred reach limit. I did have to shorten both lines. I actually thought the rear line wouldn't be long enough to reach my rear brake because I did run my rear line internally, but I had about 2 ft I had to trim. Because I opened the system, I did have to bleed both front and rear lines. I watched multiple YouTube videos on this specific brake. I did not use Magura’s bleed kit but another kit I already had for my wife's eBike that was made for multiple types of brakes for bleeding including Magura. The bleeding on the rear was a little more difficult because I was not able to lift the caliper above the lever because my rear line was run internally, (and didn't want to raise the rear of the bike higher than the lever) however it went very good, especially since it was my first time bleeding Magura brakes. The front bleed was much easier because I was able to hold the caliper above the lever. I did purchase Magura’s Royal Blood (blue) mineral oil for these brakes.I've read Magura brakes are notoriously hard to bleed but I did not have any issues at all. I'm 6ft, 237lbs and my bike weighs 79lbs. That's 316lbs and stopping from 25mph, without locking up the wheels, is about 7-8 ft in dry conditions. You can easily lock up either brake if needed. I purposely tested both brakes by locking the rear brake up, and simply finding that sweet spot for the front brake so I could find the range for both brakes. If your not ready for that emergency when it happens, you could end up getting hurt by not knowing your braking force with these brakes. And as always it is never safe to lock up your front brake, but it is advisable to at least know where that limit is on your specific bike and lever limit/range/pull. I did change the brake pads to the single pads, one pad for each piston. The pictures still show the double pads because I never took new pictures with the single pads on the brakes. The pads that come with the Mt5e are the double pads and you have to remove the caliper to change them. I didn't want to have to remove the calipers ever time I needed to replace pads. Yes the double pads are cheaper but more work to change them. However, they were still very good at stopping the bike. With the single pads you can manually adjust each piston if the pads are wearing differently. There are YouTube videos on how to make those adjustments by removing one pad and pulling your lever, JUST A LITTLE. But please watch those videos to learn how to adjust each piston if you ever need to. Most likely, if they are installed properly, you shouldn't ever have to adjust these brakes pistons but it is nice that you can do that with these if needed. My bike is the HeyBike Explore. It's a big bike with 26x4 wheels/tires and these brakes are perfect for it. If your on the fence about these brakes, get off the fence and buy them. Some people only buy one for the front brake. I've read that most people will buy a four piston brake for the front and a double piston for the rear, 180mm disc for the front and 160mm disc for the rear. I just bought two of these brakes from here and I couldn't be happier with my purchase. I already had the red two pin connector on my bike so it was plug and play for me. Also, Magura states their brakes do NOT need to be bled unless you have to open the system for some reason. (Shortening a line, replacing a broke or damaged line from riding, etc.) Other hydraulic brakes (some) need to have their mineral oil changed once a year. Check it out on Magura’s website. I have never had any loud noise from the brakes, no squealing, no rotor noise or vibration. I can just barely hear them make the connection to the rotor when I apply them. If you're wondering how much play is In the handle to activate the brake light and turn the motor off, it is very very small movement. These brakes are set for a system that is normally open (NO). When you pull your lever it closes the connection and stops the motor and turns the brake light on. (If you have a brake light.) In my pictures of the lever you can see the split were the wire goes into the lever so you can see how small the space/gap is when the lever is pulled. When I pull the lever I don't even notice it.I would love to try Magura’s new ABS brakes when they come out.Hopefully this helps a little! 🚵‍♀️

These brakes are so powerful. They can lock the wheels instantly if you want them to but they also have excellent modulation to slow the bike with light application. They are also quiet with no shuddering. The switches to stop the motor when the brakes are applied works perfectly too. For me these are the perfect Ebike brakes. I could not ask for any better performance. The installation was easy too. They came prefilled. I did have to cut and shorten the lines but it was simple and I was careful so they worked perfectly without messing with the bleed screws. Would I prefer metal brake handles? Yes, but the performance is so magnificent that I am elated with them. If I crash and break a handle I’ll be cursing them but right now I’m loving them. They perform flawlessly!

Monter à l'avant sur une grosse trotinette electrique. Cette etrier fait de très bon freinage même à 80km .Le maître cylindre plus petit que la plus par de autre maître cylindre est parfait.J'ai un grande confiance dans ces performance comparer à l' origine. Et l'usure des plaquettes n'est pas exesive vue ce qu'elles subissent.

Habe die starken MT 5 am Sondors Fatbike montiert. Das Rad ist ja etwas schwerer, daher sollte man schon zuverlässige Bremsen haben. Meine Erwartungen wurden auch voll erfüllt: Die Bremsen packen wenn nötig hart zu, lassen sich aber auch sehr gut und zuverlässig dosieren. Der HiGo-Schliesser schaltet den Motor ab, wenn gebremst wird. Der rote Anschlussstecker ist allerdings sehr hart und spröde. Wenn man den nach einigen Wochen wieder lösen will, kann das Material wegbrechen. Da waren die China-Originale eindeutig besser zu benutzen. Na gut, ich hab das gesplitterte Steckerchen mit Panzertape umwickelt, dann war eine weitere Nutzung möglich. Dennoch 5 Sterne, weil die Brems selbst ist einfach super! Hinten auf 180er, vorne auf 203er Scheiben.