Shopping Cart

Your cart is empty.

Your cart is empty.

Log Splitter Build Kit: 16 GPM Pump, Mount, A7 Auto Return Valve, Bolts, Coupler (for 1' Engine Crankshaft)

5.0 Write Review
Free shipping on orders over $29.99

$229.00

$ 99 .00 $99.00

In Stock
  • New Hydraulic Log Splitter Pump 16 GPM @ 3600RPM
  • Shaft: ½” Inlet port: 1” Outlet port: ½” NPT
  • 7- 1/4" L with shaft 5- 5/8” L without shaft
  • 3” across body 3 -3/8” across mounting surface
  • Minimum 8 HP or larger gas engine, direct drive only, horizontal shaft (can be mounted vertical or horizontal)
  • For use with open center hydraulic systems only
  • First Stage: 13 GPM @ 650 PSI Second Stage: 3 GPM @ 2500 PSI
  • Maximum pressure: 4000 PSI
  • Bolt circle: 2.83in.
  • 4 holes spaced 2” on center Mounting hole diameter: .344in. Woodruff key: 1/8in. Rotation is clockwise


This valve is a 2-way operation Log Splitter valve - Direction 1: Actuate lever by hand, release it and it returns to neutral. - Direction 2: Actuate lever by hand, release it and it stays in the actuated position (active) until the hydraulic cylinder bottoms out (or otherwise senses a spike in hydraulic pressure), at which time the detent will kick the lever back to the neutral position (inactive) - Single spool, Open center. - Max pressure rating: 4000 psi. - Relief valve set at 3100psi but is adjustable between 1000 psi and 4000 psi - Working ports ½”NPT. - In/Out ports ¾” NPT - Detent Pressure set at 700 psi but is adjustable. (Detent accessed by removing end cap) - Compatible with most log splitters (SpeeCo, MTD, Brave, Swisher etc) but can be used for any DIY hydraulics project