Your cart is empty.
Your cart is empty. PART SPECIFICATIONS:
··· 1. Pressure gauge, 1/4" female fitting
··· 2. 15 feet hose, 1/4" male to 1/4" female fitting, for standard schrader
··· 3. 8 feet hose, 1/4" male to M6x1.0 male fitting
··· 4. Tee fitting, 1/4" + 3/8" O.D. aluminium side tube, 1/4" female
··· 5. Cut hose x 2, 1/4" I.D. x 3-1/2"L and 3/8" I.D. x 3-1/2"L
··· 6. Hose Clamp x 2
··· 7. Adapter x 13
ADAPTER FITTINGS:
Tank Style Adapter x4
··· 1. M12x1.5 male to M10x1.0 female
··· 2. M12x1.5 male to M8x1.0 female
··· 3. M12x1.5 female to 1/4" male
··· 4. M12x1.5 female to M14x1.5 female
Dual Male Fitting Adapter (short) x3
··· 5. M12x1.5 male to M14x1.5 male
··· 6. M12x1.5 male to M8x1.0 male
··· 7. M12x1.5 male to M8x1.0 male
Dual Male Fitting Adapter (long tube) x3
··· 8. M12x1.5 male to 1/4" male
··· 9. M12x1.5 male to 1/4" male
··· 10. M8x1.0 male to 1/4" male
Special Adapters x3
··· 11. 1/4" male to 1/4" male
··· 12. M12 male to ring end
··· 13. M12x1.5 male to M14x1.5 male
Jack Roten
Reviewed in the United States on March 8, 2025
Appears to be descent quality but was not right for reading pressure on my 97 Land Cruiser at the fuel rail banjo bolt. The M12x1.25 fitting had less threads and a longer body which I didn’t notice till lightly torquing the fitting. This caused fuel to spray out of the connection and some slight bending of the top threads in my fuel rail. I was able to correct the fuel rail threads and use the basic fuel pressure test kit from Harbor Freight successfully, so no major harm done. If your 90s Toyota has a similar banjo connector and bolt I’d use the similarly priced HF kit.
Paul
Reviewed in Australia on May 10, 2024
Good tool I have tried it and worked great had to make few special fittings for my project but the gauge worked great
MT
Reviewed in the United States on February 22, 2024
Good setup has lots of fittings
Andrew
Reviewed in the United States on August 1, 2023
Well worth a $30 investment. Even if you already have a test kit this would still make a nice spare.I've got 2 other kits, one Snap On and one Mac Tools. Obviously the quality is higher on the "professional" fuel pressure test kits but so is the price by quite a large margin. But... Are you really getting that much more for your money? Honestly if you're just a hobby mechanic and need something around the house/garage, I think this kit will cover most all of your needs quite nicely.If I could add one thing it would be a hook on the gauge so it could be hung up if needed and perhaps a bit longer hose but those things certainly aren't deal breakers. What is really nice is the secondary fuel sample hose that comes off of the gauge - Great Addition!Great buy for @ $30
Oakley
Reviewed in the United States on August 1, 2023
Lichamp Fuel Pressure Gauge Kit, Fuel Pump Pressure Test Kit with Pressure Tester Adapter and Hose, NB1BKBeen fighting a fuel delivery issue on one of my vehicles and was starting to feel like my local auto part store was getting tired of me burrowing their loaner tool. It's nice having one on hand that I can grab whenever I need one to check the fuel pressure.Nice complete kit with multiple adapters for a wide variety of vehicles. I personally prefer the foam containment over the plastic storage cases. Allows you to add additional adapters when you need to.One thing I did find interesting. Even though you can tell that the Fuel Pump Pressure Tester was brand new. We were able to detect the slight smell of gasoline when we opened the case.
PandaReviews
Reviewed in the United States on November 19, 2023
This is a great tool. It’s a good idea to have one of these handy if you have an old car especially a classic. It’s a good time saver with everything you need even the case that holds everything it’s on spot. I did notice that one part in my case was loose and didn’t have a cut out, but it took me all of 10 seconds to make my own cut out that worked perfectly fine.
Kay r
Reviewed in the United States on November 1, 2023
This is a good fuel pressure test kit for those of us that work on our own vehicles.The kit has most of the fittings that I commonly use. I usually rent a kit from the local auto part store or borrow a set from someone that has many more tools and knowledge than I do. Once in a while there is that special fitting that I will still have to go begging to borrow.The kit has some good qualities like the pressure relief valve with the clear tube that can also be used for taking samples. I no longer need to crack open the fitting at the Schrader valve and soak up the fuel with a towel. The case is nice a fairly tough, but I do worry about the plastic latches. Some of the fittings do not stay in place when the lid is closed. The black extension hose clearly needs it's own slot. The biggest issue I see and could easily be fixed is that there is no legend or diagram that tells you what size each fitting is. This was something that older kits had and it was greatly helpful. It's a shame that things like that and simple directions are a thing of the past.Overall it is a good kit that seems to have well made parts and it is a good value for the present purchase price.
Fred A. Bronnert
Reviewed in the United States on October 19, 2023
This kit IS NOT for trying to test fuel systems on GDI equipped engines which can run pressures in the thousands of pounds .The good: decent quality, seemed accurate when testing on NON-GDI fuel rails.The bad: lacking some connectors. I purchased an additional different kit just to get some additional connectors
devildawg
Reviewed in the United States on October 11, 2023
This is a review of the Lichamp Fuel Pressure Gauge Kit, Fuel Pump Pressure Test Kit with Pressure Tester Adapter and Hose, NB1BK.This kit comes with the full complement of hoses and adapters. It is definitely a tool anyone messing with old cars has to have so properly diagnose no start situations. I have used it twice and both times, I believe the accuracy was close as I was able to properly diagnose and fix the issue.They could have done a lot better on the case. Do not count on all the bits to stay in place and pray you don’t open it on the wrong end. The bits will go everywhere.That said, the connections were solid and leak proof.
Recommended Products
