Your cart is empty.
Your cart is empty.The fast, easy way to precisely make straight, wide cuts in plywood and solid wood .anywhere Parallel Guides attach quickly and easily to the Adaptive Cutting System 62" Guide Track to provide accurate measurement and material stops when making cuts from 12" to 96" wide in solid wood, plywood, and other sheet goods. Parallel Guides make guided cutting even easier and more accurate. Rip Guides also eliminate the hassle and potential inaccuracies of measuring and marking every cut. Parallel Guides lock onto the 62" Guide Track, and precision measuring tapes that extend for cuts from 12" to 96" wide. Heavy-duty brakes lock measurements in to enable making one or many cuts at the exact width without having to measure and mark the workpiece. Simply lock in the measurement desired, place the 62" Guide Track on the material, and position it so the hook on the end of each Parallel-Guide measuring tape contacts the edge of the material Then make the cut. The Guide Track stays in place on the material, while the Parallel Guides position the material precisely. Rip Guides attach quickly to the 62" Guide Track when needed, and can be easily removed without needing to be recalibrated or adjusted for accurate measurements every time. Sold as a pair. Designed to work with the Adaptive Cutting System 62" Guide Track
Travis Collins
Reviewed in the United States on February 26, 2025
Works as expected. Although I can’t say I would buy it again. Feels very flimsy with plastic set screws.
Jim
Reviewed in the United States on September 25, 2024
At first when I took them out I wasn't sure about the quality, but after using them I was sold. I cut four 4x8 sheets of plywood with the extended Kreg track saw and each sheet was exactly the same size. Just need to spend a couple extra minutes carefully calibrating the scales. If you have the task saw, spend the extra money for these.
Crashmandon
Reviewed in the United States on July 24, 2024
They are easy to use and accurate as long as the operator is accurate.
Doug Williams
Reviewed in the United States on July 24, 2024
Great concept and application. Perfect for repeatable cuts on separate boards. Perfect for boards longer than 62 inches. Very easy to move your track down the board and match the exact cut line
Will B
Reviewed in the United States on April 19, 2022
The indicators are not fine enough for precision work and the locks are not strong enough to keep the tape from moving as you try to position the track for your cut.
andrew c stella
Reviewed in the United States on April 19, 2022
these work great with the kreg system and are very accurate.
Jon H
Reviewed in the United States on July 28, 2021
First off, I used these with Makita tracks and track saw. The Makita and Kreg tracks are similar enough in width that I was able to dial them in with the available adjustment range. YMMV.I bought these to compare to another brands (fast is in the name) that already have. First off, there are several high end systems that are likely easier to use with better, easily repeatable accurate cuts. But for the money they work really well. I like that they each use two points to mount to the rail keeping them 90 degrees to it. This increases the accuracy as they can't cock to one side or another. The ones I compared them to would.Anyway I recommend them for a budget setup (or on the truck set like I use them for)
clydemonkey
Reviewed in the United States on March 26, 2021
It is plastic and they actually have a screw that the mfg states to loosen and adjust to zero them out.
I bought this product
Reviewed in Canada on November 19, 2020
Good alternative method to keep the track parallel to the edge. Only lost 1 star due to all plastic build and concern in longetivity of the actual tape measure mechanism. Would still recommend them
Recommended Products
