Your cart is empty.
Your cart is empty.Correct swaybar geometry on lifted vehicles and improve suspension performance on- and off-road. Highly responsive bushings reduce loss of motion between chassis and suspension for improved handling. Prevents swaybar from contacting axle housing at full suspension droop. Variable length design allows you to accurately set swaybar operating angle. Special zinc plating applied for corrosion resistance and long lasting protection.
3D
Reviewed in the United States on May 29, 2023
Not one piece design at the bushing heads. It is rolled over then welded to a nut. The welds look like high school shop class practice. Probably won't last. For the high price you would think they would be more heavy duty and professionally made. Not a credit to the JKS name. Nothing but junk
JTurner
Reviewed in the United States on March 10, 2022
For what they are the price is kind of high. I like jks front discos very beefy these are basically a threaded rod with bushings on the end.They are adjustable which makes it nice with a lift. They did help with the swaying my Jeep was having. If I were to do it again probably would by non adjustable and get the correct size.
Jay
Reviewed in the United States on March 6, 2021
These are very strong and well made. It took no time to install them. It was easy to set the swaybar to where it should be on my 3 inch lift TJ.
Na
Reviewed in the United States on February 18, 2018
Installed onto 2003 TJ. Build quality is fantastic. Very easy to put together and install. Removing old sway bar links was most difficult part.
Farmerjo
Reviewed in the United States on January 22, 2018
Installed to help get some of the roll out of 1997 jeep wrangler tj w/4" springs, allows for the correct angle of sway bar to be achieved, helps handling all around once a lift has been installed. The install takes about 45min less if you are familiar with your jeep. Solid product would definetlty recommend (along with front adj links) if you have a lifted tj
Odessadoug
Reviewed in the United States on May 19, 2015
High quality, just like you'd expect from JKS I didn't use them on my Wrangler, because the modest lift I finally chose to do didn't require it. From this review, however, you can be assured that JKS is a great company to do business with, because their products are all first-rate, and they made returning the kit easy and pleasant.
Jeep-PS
Reviewed in the United States on June 14, 2013
I have a ford 8.8 on the rear of my TJ. The previous owner had put on the standard 4" lift links, and they were too long because of the difference in bracket locations on the axle. Because of this the travel was limited. These adjustable links are a perfect fix for that.Note that 'adjustable' means that you cut the threaded part to the length you want and install. They wouldn't be very adjustable after they are cut, so it's really a one-time thing.The bushings are nice and thick, with no sleeve. The old ones I took off (4" lift skyjacker links) had the same outer diameter as these, but had a sleeve, so the poly part was thinner. They were almost completely disintegrated. I'm hoping these JKS ones last longer since they have considerably thicker poly bushings.
shawn trumble
Reviewed in the United States on October 5, 2013
High quality parts are all you get when you go with JKS parts, some of the best jeep stuff out there, always over built, high quality, that should out last the jeep its getting put on. These are no exception, easy to follow instructions, and a great part, if you have a lift on your TJ put these on and it will make the ride feel much more stable.
Recommended Products
