Your cart is empty.
Your cart is empty.Product Description
Dylan
Reviewed in the United States on February 12, 2025
Installed on 2018 KTM 690 Enduro R-5 star product because of the price to quality ratio. Stock protectors and a lot of aftermarket ones are extremely expensive for full plastic even. These are cheap so breaking/replacing are not going to burn a hole in your pocket, also cheap does not equal crappy with this product. These are also reinforced with metal so they will last longer and take more of a hit than the plastic expensive ones. They are a little narrow compared to my stock ones but they will still protect my hands/levers more than plastic ones.-Reason for 4 star is the installation was a little tough, as is with most aftermarket universal fit items though. I did not use the plugs (idk what they are called) for the end of the handlebars, ended up using the stock ones since they added an extra half an inch which helped with fitment.-My levers were too long to fit with this but I have been looking for an excuse to cut down my stock levers to make shorty levers. Absolutely love the shorty levers on my bike so it worked out great!little explanation of photos. First two show both one with stock protector and one of these. the other shows both sides with these. Last two photos show just my clutch side lever and how that fit/my solution which was an upgrade anyway.
Phillip McCullough
Reviewed in the United States on August 7, 2024
I mounted these on my Freesky Swift Horse ebike. I was about to purchase the $80+ Geo guards (which are excellent, I'm sure) then I said why not get JFG dirt bike brush guards for $26 made out of aluminum with carbon fiber looking plastic covers? I got the JFG's in a day and they mounted on the Swift Horse perfectly with no cutting or fuss. They look absolutely awesome, leave plenty of room for my hands, fingers and levers. They will provide excellent protection from breaking levers and master cylinders. They are lighter than a lot of the motorcycle handguards, but are quite robust, maybe overkill for ebikes. Happy Happy Happy!
libero
Reviewed in Japan on July 30, 2024
アタッチメントも2種類入っていて意外と簡単に取り付けができた
Brian K
Reviewed in Canada on October 18, 2024
Product arrived fairly promptly from overseas complete and intact. Installation was easy although no instructions were provided referring instead to You Tube. All pieces fit and appear to be robust, although only time will tell with that.
fx1mark
Reviewed in the United States on February 28, 2023
I got these for My Nicot ebeast. They were a perfect fit. Installation was easy. Only modification is you need to cut the end of your grips off to insert the bar end mounts. The hand guards are sturdy and good looking. I would recommend these.
Chris Sullivan
Reviewed in the United States on December 16, 2023
I purchased these three years ago. They are still holding up for the most part. The brace that protects your hands is solid, but I have had to replace almost every screw because they fell out, broke or stripped. If you don't mind making a few trips to the hardware store they can do well for you. But they do look cheep and in my experience took quite a bit of finaggling to get seated properly.My recommendation is to buy a different brand, spend a little more for tusk, barckbuster or ascer guards.If you still want to buy these,My recommendation is to use locktite on all screws, and replace the bar end bolts with quality ones before install.
Ed
Reviewed in the United States on January 24, 2023
fit great on my crf300 stock handle bars. not much trouble installing either. material seems solid although I haven't fallen over to really test it out. great value I think and they're not that expensive
Phoenix wilson
Reviewed in Canada on May 27, 2022
This is the 3rd set I have purchased for my Dirtbike’s. You can’t beat the quality and price, they look great too.
Rob Coulter
Reviewed in the United States on September 14, 2020
If you want the look of handguards without any of the support or safety of functional handguards, then buy these cheap POS.To keep from moving by hand, I needed to cut a piece of garden hose to wrap the bar and use the largest plastic inserts. Those plastic inserts are hard and slippery. Also, in tightening and loosening to adjust, the hex heads started to strip. I think they're made from cream cheese or something similarly soft.One slow speed topple on the left side shifted the handguard into the top of the fork. Any more force and this would have caused some real damage. Luckily the clutch lever wasn't harmed, but there wasn't a way to straighten this until we got home. So one good whack with my fist moved the handguard down and out of the way from rubbing the lever.Overall pros:--Decorative, makes your bike look badass--That's itCons:--The inner mount pivots left/right so any force from the side will allow the guard to shift inward--Cream cheese hardware/bolts--The actual wrap around seems pretty hardy, but given the rest of the parts not going to rely on it offroad--Could damage your bike and you in the event of a crash or fall over--Doesn't fit/stay tight without mod and additional bar spacers
Guillermo
Reviewed in Mexico on October 3, 2020
Me llego rápido y de buena calidad, por el precio la verdad esta súper bien he comprado otros mucho más caros y este tiene la misma calidad de los caros
WHO?
Reviewed in Canada on July 21, 2019
They are sturdy and look nice .Fitting them on my KTM 200SX was a little difficult and on one side I couldn't have it tighten enough ..will update after I will have a ride in the bushesUpdate: They lasted well and sold the bike after 2 yearsNow I bought another set, the new model ,for my 350 sx-f and they can't be tighten enough on the bars ,but they serve their purpose,saved my hands so many times. Updated my review from 3 to 4 stars
Blimey556
Reviewed in the United States on November 22, 2018
These are by far the BEST bash guards I've ever installed! The included hardware is all really good quality and the articulating clamps make them fit just about perfect on the bars. I've never seen bar clamps that give you this kind of dexterity so I'm extremely impressed with how solid they are mounted. The compression fitting for the tips of the bars comes with two sizes of collars which secure in like they're stuck in a vice (in other words, no chances of them coming loose or rattling around while you ride!). You're also not likely to strip out the screws. I put a lot of force on them to make sure it was held together properly and had to redo it a couple times to get the plastic shims combo correct. The hardware got kind of mangled, but worked flawlessly and in the end didn't lose any threads. I haven't had a chance to battle test these just yet, but after experiencing how bad a lot of the other cheap versions have been, I believe these hand guards are going to stand up to the abuse. They look beautiful too! Great fit and finish. To my surprise they have kind of a carbon fiber texture to them. Not sure if that means they'll retain more dirt than normal, but they look neat.
Recommended Products
$50.00
$ 22 .99 $22.99