Your cart is empty.
Your cart is empty.IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. IVY Classic Swift Cut Aluminum and Plastic Cutting Circular Saw Blades are designed for cutting plastic, vinyl siding and light gauge aluminum (up to 1/8-inch). These high carbon alloy-steel blades are constructed for their outstanding cutting performance and feature precision ground teeth with no set for smooth, accurate cuts. Expansion slots work to reduce heat build-up and eliminate warping.
Customer
Reviewed in Canada on March 9, 2025
working good for aluminum and plastics
Customer
Reviewed in the United States on March 20, 2025
Cut like it should.
Marilyn F Hutchison
Reviewed in the United States on January 11, 2025
Exactly as described.
HUGO POZOS
Reviewed in Mexico on August 29, 2024
Corta perfectamente acrílico cristal de 3mm y 6 mm justo lo que necesitaba, el disco tiene un detalle en la serigrafía de fabrica las flechas están apuntando del lado contrario del corte me imagino que por eso lo habían regresado, pero en realidad funciona perfectamente lo recomiendo .... Mi máquina de corte es de 5500 revoluciones asi que quedó perfecto.
C. Owen
Reviewed in the United States on July 13, 2024
I purchased this blade for cutting aluminum fence posts and panels.I threw it in an old Hitachi miter saw and it went through everything I threw at it with relative ease. I wasn't cutting anything of a particularly heavy gauge, but I was very pleased with the performance in my application, and I found the price point very reasonable compared to some options that are out there (which may be engineered for a heavier gauge material).
B Dow
Reviewed in Canada on May 14, 2024
I was looking for a blade to cut double walled and webbed trusscore paneling , this blade was the correct choice !!! Cutting this paneling was a breeze , made a 16ft cut length ways with ease , no cracking , no splitting and easy to use . Would recommend this blade to anyone looking to make some cuts on this type of material 👍!!!
Randy Jones
Reviewed in the United States on November 11, 2024
This worked great for cutting vinly siding on my chop saw and table saw. Highly recommend.
RAUL SILVA
Reviewed in the United States on October 1, 2024
Cut beautifully without any chipping.
Aussie Stu
Reviewed in Australia on April 28, 2024
Use blade to cut thin plastic 10/10😄
Hassan Ali
Reviewed in Saudi Arabia on November 7, 2023
المنتج في القطع جيد ونظيفلكن اتجاه السهم في تركيب القرصحسب معرفتي انه غير صحيح وارجوا التوضيح
alex smith
Reviewed in the United States on February 6, 2018
Its a solid blade, but not great. Im getting alot of melting with this blade. But for the price, its not that bad, so if you want just a cheap blade for some plastic/acrylic its not that bad. Would be best for PVC, short, quick cuts, just not long rip cuts down long pieces of acrylic sheets, where you want flawless long cuts.
KS80537
Reviewed in the United States on January 21, 2018
Bought this for one purpose only, to cut through HO scale Bachmann EZ-Track on my table saw. The track has non-ferrous rails and its bed is plastic. It worked good but not great; the rails had little burrs that had to be filed off by hand. On the plus side, each cut was straight and perpendicular to the track, and making cuts was fast. It was better than using a hacksaw.
blank
Reviewed in the United States on August 4, 2016
This blade came brand new in the package - so there is no reason for what happened.The first inkling that something was wrong was the fact that the teeth were set "backwards" to the spin of the saw blade. It took lots of pressure to cut through PVC pipe (2" pipe) on a 10" miter saw. It reminded me of a dull chain saw blade, because it produced a lot of powder. The cuts were fine (with 200 teeth, no surprise) - but the pressure it took was a little disturbing.I cut 1/16" aluminum flat (1 cut), and the edge was not clean. This should have been a clue. Then I attempted to cut 1/8" aluminum angle. This blade is "rated" for 1/8" aluminum. Again, it was disturbing the amount of pressure to cut - even when letting the teeth of the blade do the work. What happened next I have never seen in a saw blade and scared me. I made 9 cuts of 1/8" aluminum angle. The aluminum pieces got VERY hot. The blade started to flex and wobble - but, when I stopped the saw, the arbor nut was not loose. Then the blade started to cause the saw to "bump" up and down as it was cutting through the final 2 cuts. What I found after taking the blade off was melted aluminum clogging up large sections of the teeth. This is impossible to clean out, as it is truly melted aluminum. Also, the cut edge of the aluminum was a disaster and took quite a bit of grinding (wire wheel) to smooth out.Not happy. This would be going back, but it's outside the return time period.It cuts plastic OK - but beware of aluminum - it just doesn't work - and I was not pushing it hard, but trying to let the teeth of the blade do the work.I picked up a 100 tooth Oshlun non-ferrous blade. Double the price of this blade, but cuts like a dream (hot knife through butter) with no cleanup needed.
Recommended Products
