Your cart is empty.
Your cart is empty.Irwin 59200CD Quick-Grip Handy-Clamp, 4-Inch QUICK-RELEASE trigger allows for fast and easy positioning and release One-handed operation is a major convenience. Squeeze to adjust and lock. Click to release. Use anywhere you need an extra hand. Jaws are designed to reach around odd shapes. Patented ratcheting mechanism provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure. Designed as the answer to hundreds of quick clamping needs around the home, workshop, or job site, whether it's holding down counter-top laminate for gluing in a kitchen remodel, holding a work-piece steady, or providing a "third hand" in the workshop or garage. Specially designed jaws hold odd-shaped work pieces. Non-marring swivel pads protect work pieces. Non-slip handles guarantee grip. Full Lifetime Warranty. The clamp is manufactured from durable and lightweight impact-resistant resin and guaranteed to be free from defects in material and workmanship for the life of the tool, except for damage caused by abuse, misuse, or alteration.
Robert
Reviewed in the United States on February 15, 2025
Lightweight and easily adjustable, I used it for soldering wires to board and it held them steady and secure. Love this tool and the price is not too expensive
Me
Reviewed in the United States on February 15, 2025
These make great nipple clips!
Dimas Araujo
Reviewed in Brazil on August 13, 2024
Ótimo material, recomendo
Craig Dikken
Reviewed in Canada on March 29, 2024
Easy to use, grips well, reasonable price. I'd buy again.
Ryan
Reviewed in the United States on December 8, 2023
I needed something to hold my Mazda's window in place while I replaced the power window lift motor, and this tool worked perfectly for the task. It's surprisingly light-weight, which I was initially worried about but came to appreciate, as it's very easy to manipulate. This was my first IRWIN tool but certainly won't be my last!
Saperna
Reviewed in Brazil on January 10, 2023
Dependendo do uso muito bom, o aperto nao achei ser muito forte.
Stratovarious
Reviewed in the United States on June 11, 2022
Edit 7 22 24The yellow bumper/grippers still fall off much tooeasily, but I used a pair of these for a couple hours today,holding down a 3/4'' 12x18'' board to be sanded,I noticed that if I use both hands and reallymanhandle the clamps, they held the board well.I guess I was afraid to ruin them before by puttinga lot of pressure on them, maybe they can handlemuch more than I had thought.Recommendation; When I release the clamps,I first squeeze them with medium force totake pressure off of the ratchet-release mechanism,I think that might make them last longer.Edit; 4 28 24There are some nice features, that I listed in the originalreview, however there are issues that would prevent mefrom buying these again (2);The yellow pads FALL-OFF so often that I keep themin a parts drawer, and without them the clamps don'teven fully close. When the pads are attached theystill don't clamp things like a 'real' set of clamps,no matter how hard I clamp them, they will putjust a very slight amount of pressure on whateverit is that I clamp.Original review;So, yes, I have to agree with others, these are not all that strong, inother words, if I clamp something really hard, I can still pull it free withsome effort. However for what my usage is, they will be fine, they look goodtoo, that accounts for something. For the price, (almost a give away price),they are winners in my book. Don't expect to squeeze blood out of a rockwith these, but they will hold things together fairly well.Full Open dimension JAW TO JAW approx 3 13/16 , first click approx 3 3/4(96mm and 95mm for the Brits)Jaw to throat distance (center) 3 3/16'' (81mm) full closed.Tool length 9 7/8'' (25cm)Tool Width (widest point closed) 5 3/16'' (13cm)The soft, robust, rubber jaw-pads are removable, which will be auseful feature for what I need them for.Great value, again considering my intended usage, I can't ding thesea star, I had a clue or idea of what they would be like when I purchased them.
GKL
Reviewed in Singapore on February 20, 2022
Seriously lacks holding power when compared to the previous gen of irwin's handiclamp. Save ur money and get the irwin 59400CD instead
Galhillel
Reviewed in the United States on January 4, 2022
the yellow heads fall very fast . after a week all of them are gone and then the Clamp are useless .the clamping force is very weak
SAMUEL
Reviewed in Canada on May 25, 2021
Really not good clamps, probably the worst Irwin.If you clamp something that is not parallels, the yellow tips just fly off!
Craig J. Stern
Reviewed in the United States on August 10, 2020
These clamps are indeed quick and they are indeed handy, as advertised--as with all face clamps, the fact that they can easily reach over and around other clamps can be extremely useful when clamping along multiple axes at once. They're sized well and comfortable in the hand, and the quick-release lever works nicely.So why only three stars? Simply put, these are easily the weakest clamps I own--and I own several Harbor Freight trigger clamps! So while they're handy on occasions where no other clamp I have will reach, those occasions are also the *only* time I use these. (Also, the pads pop off all the time.) In all honesty, you're probably better off spending more and getting some proper metal face clamps.
DMB
Reviewed in the United States on March 7, 2018
These light duty clamps are great as a "third hand" for holding parts in alignment for subsequent final clamping with say screw type clamps. Overall the handi-grip is light and operates easily with one hand, smoothly loading and locking thanks to a fine pitch ratchet mechanism.Even though the handi-clamp frame members are all plastic the tool is ruggedly built and surprisingly rigid. However, the fine teeth on the metal ratchet mechanism can be overloaded if the average guy uses his full grip strength to achieve "extreme" gripping (clamping compression) loads. As well, if this is done there will be little clearance for your fingers to trip the ratchet unlatching lever between the tool's hand grips (i.e. a screw driver blade may be needed to trip the locking lever to unload the clamp).As an example In woodworking these Irwin handi-clamps will generally NOT develop the force needed on a caul to properly compress larger glue joints. In sum, don't expect that these light plastic handi-grips to be "Vise-Grip" or C-clamp substitutes -- they are not in that league. Again, this is a light tool to be used with one hand for quickly setting initial part alignment. Depending on your application, additional clamping tools may be required to assure satisfactory final clamping loads.
aldeabob
Reviewed in the United States on June 15, 2015
These are better than spring clamps for my purpose. You do not struggle against a strong spring to get them into working position. You simply move them to the right opening and then squeeze to apply whatever clamping force you want. Also unlike many spring clamps, the jaw-pads swivel to meet the clamped surface squarely. The release works with relative ease, though you do need to orient it toward the palm of your hand to be able to use it.I will eventually use these clamps in woodworking, but I have an unusual application for now. When I put a book on a stand, this clamp will hold the pages flat to the cover so they do not pull back toward the closed position.It was not immediately apparent to me that the 2-inch designation was the opening for clamped material. I bought two of this size and should have bought one this size and the second smaller. When an open book has more pages on one side than the other, this clamp will always handle the larger side and the smaller would handle the side with less than half the pages.OK, I said my application was unusual!
Recommended Products
