Your cart is empty.
Your cart is empty.The metal art CPU Caddy uses modern design and innovation to help your computer fit into your life. Both in function and in form. Forged from steel, it puts your CPU up on wheels so you can roll it around a little without any lifting. The more digital our.
Chico
Reviewed in Canada on June 10, 2024
Good ,quick shipping but it is too small for my case( my fault) ,I did not measure my case before I bought it.
mug3n
Reviewed in Canada on April 14, 2023
I decided to get a nice sturdy metal frame for my desktop tower so I can lift it off the ground and get some decent airflow going with it. This was a decent choice, but there were definitely downsides, namely the quality of the caster wheels and a locking mechanism that really doesn't do much to keep the unit in place. Fortunately I don't really move my tower around very much, but it would have been nice to see some more thought put into it.In terms of putting it together, it was super straightforward but would've still been nice to see the manufacturer include an instruction page, which did not come with my package. The side metal panels on the stand slide around nicely on the rails once screwed in. I didn't like the little wrench they included with the parts, it felt like an afterthought and wasn't the most pleasant thing to use to fasten the nuts. But otherwise works well.
tinkink
Reviewed in Canada on February 8, 2022
Got one in white- please note, it's actually sort of "off white". If you're hoping for a stark modern cool-toned white, you'll be a little disappointed. I don't think it will matter too much since 90% of it is hidden beneath the computer anyways but it's something to consider if you're very serious about how you color coordinate your setup.It's pretty simple to put together and it seems sturdy enough to hold my fairly mid-weight pc. As others have mentioned, the casters are a bit lame. The locking mechanism isn't very strong and the casters don't move very smoothly- they feel pretty cheap, not weak perse but cheap. Not worth it for me to kitbash some other casters on it since I'm mainly using it for airflow rather than portability.4.5/5 on account of the casters, but it's solid and clean looking.
Jackson Wong
Reviewed in Canada on August 2, 2021
Putting together was a bit difficult if you do not own actual tools, the tools given to you are a bit annoying to use.You also need two wrenches basically and they only supply one so I would recommend that you make sure you have a small wrench so it makes your life easier to tighten the bolts together.Other then that my rig is off the floor so it does as it says it would.
Kera Walker
Reviewed in the United States on March 15, 2021
It didn’t come with instructions so i just kind of winged it but seems fine! It’s nice to have my 45lb PC tower off the floor.
John Janse
Reviewed in the United States on September 16, 2020
I was a little annoyed it didn’t come with assembly instructions, but I managed to figure it out.That aside it works just fine, allowing me to wheel out my otherwise heavy PC with little effort anytime I need to check something.
Barbara_Zee
Reviewed in the United States on June 19, 2018
Parts (castors, bolts, and foam pads) were missing from one package, but luckily I ordered two, and the other package had almost a complete extra set of bolts. So I really only was missing casters at that point and had been planning on replacing the castors with rollerblade type non marking wheels anyway. It all worked out. Looks decent, doesn’t scratch the computer and makes pulling it out to hook things up much easier. Good product, just make sure you have all the parts.
o.h. fox
Reviewed in the United States on January 6, 2018
I got this thing for my PC tower so it didn’t have to sit on my hardwood floor and suck up dust and dirt underneath. The length is a bit short, like I wish maybe it was a little longer, but otherwise it’s fine. Everything seems well made and assembly was easy. They include little strips of foam with adhesive backing and you can stick it on the sides or bottom to provide some cushioning.
El Diablo Robotico
Reviewed in the United States on August 7, 2016
The stand is ok. I got two and put them together end to end because one didn't seem stable enough to hold my computer case as I was afraid the case would tip over one way or the other as with just one stand, both my current and previous computer case had a couple inches sticking out on each side and it did not seem stable.Even with the vent holes on the side of the stand, I got the impression that it was not sufficient to allow for proper airflow for my previous computer as the side vents on the computer case was low enough that the two parts which grips the computer case probably blocked some vents on the case, which may have contributed to my computer overheating and dying a year after I got these stands. My new computer case is smaller so I'm going to give opening the side grips on the stands as wide as possible so that I have about 1-2 inches of space between the computer vents on the side and the stand's side grip to see if that'll allow for better air flow.I see that since I ordered the stands that I have that there are other models available where they changed the way the side grip works which will probably be less likely to block air coming into and going out of a computer case. Get the ones that look like large X's if you're concerned about airflow.Tightening the screws so the sides of the stand to stay where you want them to be could be a bit tricky because you have to work around having a computer case on top of the stand, the screws being partially covered by the side flaps, which are curved so you can't insert a screw driver straight down on top of the screws at a 90 degree angle, and you have to reach underneath the stand to hold the nut in place while you're tightening the screw from above.
JJ.Pereyra
Reviewed in Mexico on November 4, 2016
Sirve perfecto para poner tus gabinetes a nivel de suelo. El diseño se ve bien y que sea ajustable lo hace aun mejor.
Ricanguy007.
Reviewed in the United States on December 2, 2014
The perfect product for the Desktop PC CPU on the Floor makes it look more professional super solid construction quality materials ,stays secured in place looks great and stable ,this is my 3rd different one and exceeds ,quality stability and not cheap like most other that ended up in the garbage for looks and instability, this is a keeper plan on replacing all my others, they stay secured in place and wont move or if they are changed of location they stay in place thats a great, place most others cant handle it open up or fall off. If you buy one all your computers will be changed immediately, another thing assembly is so easy it could be done in 5 minutes ,it comes with protection strips to prevent scratching and movement and a little wrench for ,nothing needed all included.
Squirrelfiend
Reviewed in the United States on February 11, 2012
I have a full case and wanted something that could:1. Keep the tower off the carpet as well as have wheels for future accessibility.2. Provide better ventilation for the case because the Power Supply Unit is on the bottom with the air blowing out the bottom and not the back.I've been searching around for a few weeks and recently found this little gem. It's extremely sturdy and didn't take that long to put together. When I put my case on it, it covers about 60% of the bottom. Even though it fully supports the weight of my computer tower (I think around 30 lbs) I'd rather it fully rest on it and not hang off an edge. With that being said, I just purchased a second one. I know what you're thinking. Yes, it might be overkill but I'd rather the tower be flush against the surface. Overall I highly recommend this.
Mason
Reviewed in the United States on December 20, 2012
This product was easy to assemble, and it works pretty well. I've had it for a few months. I bought it because my PC I built has a bottom mounted PSU, so I needed to get it off the ground. It hasn't broken and at all and it still rolls fine.
Recommended Products
$1,389.27
$ 99 .00 $99.00