Your cart is empty.
Your cart is empty.Product Description
JROAD Inner Fender Liners compatible with Jeep Wrangler JK & Unlimited 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018.
The Inner Fender Liners are made of high-strength aluminum alloy, giving them excellent durability. Black powder coat finish gives the fenders higher corrosion and rust resistance. Easily withstand wear and scratches during off-roading, greatly extending the use time.
The Inner Fender Liners are designed for direct bolt mounting without drilling holes. You can refer to the installation instructions and videos, and if there is anything you don't understand, please feel free to contact JROAD.
What's in the Box?
- 1 pair of Jeep Wrangler JK Front Inner Linners(Left & Right)
- 1 pair of red round luminous lights
- 1 pair of red rectangular luminous lights
- 1 set of mounting hardware
- 1 pair of gloves
- (Note:Screw accessories will be updated continuously, please refer to the actual product.）
Why use Inner Fender Liners?
--Protects Your Jeep .Fender liners are an indispensable accessory for your JEEP, protecting the wheel wells from off-road elements such as sticks, gravel, mud, snow, sand and more. Acts as an all-around shield for the engine. At the same time, the smooth flat design is very easy to clean. Just use the high-pressure washer gun to easily clean the sand on the surface.
Mike
Reviewed in the United States on February 4, 2025
Love these fender liners! Installed on my 2020 wrangler in an hour and a half. All the lights work, simple install!
Ainie D
Reviewed in the United States on January 8, 2025
It added beauty to my jeep. I love it! The only thing about it is it was very expensive to put it on. I was charged $1,702.93 for this. The man that put this said it was the hardest job he ever take. My jeep already had an oracle lights underneath and that's what made it more complicated. Over all, I love it even if it was so pricey to put it on.
Nadeem Hood
Reviewed in the United Arab Emirates on January 13, 2025
Received the product, but some of the LED parts to light it up were missing!!!!
Cathy Luebke
Reviewed in the United States on September 3, 2024
The media could not be loaded.
Nightmare
Reviewed in the United States on February 19, 2024
Tried to install these fender liners and they are horrible. Instructions unclear and lack identifying the parts, so you have to try all manners to assess the 4 pieces and it is junk. The tab on one of the pieces broke so there goes that. The mounting bracket has no clear location on the picture or on the Gladiator. Lights don’t work, black with black, red with red. No light. Don’t waste your money and time. I can’t return this junk cause it broke.
Bob Holtz
Reviewed in the United States on July 4, 2023
Likes fit, looks. Good quality, fast delivery. What I didn’t like instructions are poor, had to take wheel off they don’t tell you that,too hard to get at with wheel on the way they tell you to hook power up to it didn’t work i had to buy wiring harness and switch to hook it up which was ok i like it that way better would i buy it again 100.% yes
Ted Cossette
Reviewed in the United States on August 21, 2022
2 things these need. Black bolts and better wire coming off the lights. Like a lot of others have said the wire is so thin you cant strip the insulation. I had to lightly shave it off with a razor blade but even with the 4 thinner than hair strands the light somehow got the juice it needed. Other notes about the wiring, if you are doing fronts its easy use the wire for your fender running lights. For rear it’s trickier but not difficult if you know which wires. They give you red and yellow extensions but basically your white goes to tail light and black to ground. Remove your tail light. The connector closest to the jeep is the one you unplug. When you look at it the ground is on top and black. The tail light wire is the one right next to it so those are the wires you need. Install on the inner fenders is complicated at best but its a slightly mis-shaped piece of aluminum, follow the video and muscle and swear your way through it. I didn’t use the little triangle bracket towards the front. Theres just nothing I could do to get it to line up right but its certainly supported enough with all the other ones. I would pre-drill pilot holes for the self tapping screws they aren’t the sharpest screws and the pilot holes makes it so much easier. When installing do the top bolt first. I had trouble with it because of my current fenders and the bracket seemed to bend up just the tiniest bit. Once I figure that out and bent it down I could get it threaded. Then do the 2 bottom holes with the spacers behind them, again muscling them into position. Start with the drivers side. It’s ten times harder than the passengers. I have another one of theres in my front wells with stars and the two together look great so I wont say its not worth it. The price is great, its definitely worth it just expect a little out of the box thinking and again a few 4 letter words but really its worth it considering the competition is equally difficult to install and so much more expensive. That and lights are just cool, but beware they are sealed and they do burn out. My fronts are a year old and one light died already but you can occasionally buy them by themselves on amazon just keep an eye on it and stock up because ive not seen them elsewhere and believe me I looked. All in all, kind of cheaply made but they look good work good, protect well, and comparatively are really inexpensive.
Customer
Reviewed in the United States on July 24, 2021
These liners are awesome! The fit is great! Not sure what some other reviewers did different but mine fit my 2018 JK perfectly. No gaps, no problems. Didn't need to remove the wheel to install. I changed the light lenses to white to match my Jeep, very simple to do. They are well made, quality material and finish. The hardware was clearly labeled and easy to understand what went where. They included the Allen wrenches and a nut driver to make it even easier to install. You have to drill 3 holes on each side, the self tapping screws they include for said holes even have a rubber washer on them to help keep it water tight. Seems like they thought of everything and spared nothing. Very impressed, especially for the price! Only complaint I could possibly have is how dainty and light the wires for the lights are, make sure you have connectors for such a small wire. Otherwise these are hands down the best bang for your buck! I already had my old liners removed so install only took me a little more than an hour, wiring included (I wired them into the side marker lights so they come on with the headlights).
Hurly22
Reviewed in the United States on January 17, 2021
Absolutely love these fender covers. They were super easy to install and seem like good quality. Pretty easy and straightforward to install. Make sure to read the directions. They aren’t the best directions I’ve ever read but it gives you some pointers. Make sure to install the leds with the cords facing each other. This would be one of my only complaints. The wire length and thickness both could be better/longer. So after you attach the LEDs, you bolt the two halves together which was easy. Don’t worry about which half you put on top. It doesn’t matter. Now that it’s all put together you lay it on your tire and splice it into your side marker light. I used waterproof butt connectors. Now you just line up the holes and screw it in. Super easy. No drilling or rivet nut tool needed.Pros: easy to install, looks awesome, good thickness, great value!!!!Cons: LED wire is thin and too short.Buy these. You won’t be disappointed.I’ll update this review after the winter to see how they are holding up.
Recommended Products
$167.99
$ 72 .99 $72.99