Your cart is empty.
Your cart is empty.
This bundle includes 3 items: (1) Hypro 3350-0058P Nylon Line Strainer with (1) 1700-0057 Buna O-Ring and (1) 3800-0040 Stainless Steel 20 Mesh Screen.
These Hypro 3350 Series Nylon Line Strainers filter out debris that may be drawn into your pump. They are used for suction and higher pressure applications, capable of achieving up to 150 psi at 70° Fahrenheit and 100 psi at 125° Fahrenheit. The cap on this Hypro 3350-0058P Line Strainer / Suction Strainer is made with white type 6 nylon, while the bowl is made with clear polyamide material for visual inspection without disassembling.
The line strainer is installed on the inlet side of the pump. If you are using a centrifugal pump, install the strainer on either the inlet or discharge side, keeping in mind the strainer's pressure rating, flow capacity, and other installation factors must be considered. NOTE: Clear polyamide bowls CANNOT be used for handling alcohol.
You can clean the strainer without removing it from the line by unscrewing the bowl from the cap, removing the screen, and flushing out any sediment. Then fit the screen to the flange in the bowl and turn hand tight to reassemble. NOTE: CANNOT be used for fatigue-loading applications (eg. water-softeners).
