Your cart is empty.
Your cart is empty.Kevin
Reviewed in the United States on March 22, 2025
i was skeptical of this because other ultrawide monitor mounts that are highly recommended are like $400-$500 and I've returned other mounts because they didn't work for my monitor or weren't strong enough to hold my monitor up at a straight on angle. But I am pleasantly surprised with this thing! I have a 34" Alienware LCD monitor so its a bit beefier/heavier than the oleds out there but it works great on this monitor arm. So glad I tried it! 10/10, would definitely buy again.
Flavio
Reviewed in the United Kingdom on February 2, 2025
The ULTRARM Heavy Duty Monitor Arm has a very sturdy and quality construction. It is ideal for large and heavy monitors such as the DQHG Ultra wide monitors., The pneumatic action of the arm makes it very easy to position and adjust the monitor at the desired height and angle.Overall very satisfied with the product
JZ
Reviewed in the United States on February 16, 2025
The clamp parts are strong, thick steel and the arm and set screws handle the 57" monitor with no problem. I highly recommend getting a helper to really dial in the tilt exactly the way you want: one person in front of the monitor and one in back tweaking the tilt set screw until it's just the way you want it.I got the white version and it looks nice against the white back of the Neo G9.
Q.K.
Reviewed in the United Arab Emirates on February 16, 2025
I used many Stands, but it’s like Makers know what we exactly need. Highly recommended.
Kick
Reviewed in the United States on January 21, 2025
Pros:Works well for 2x 49" on top of each other. Plus a laptop / additional monitor that's vertical.It will hold a 57" samsung, but due to the weight and mount, your desk might not support this mount.I have a corner desk that's about an inch thick and I had to add 2 2x4's to this thing. one below, one above, to sandwich this mount. It could not hold the 57" plus an additional monitor because the 57" is so heavy.I have the 57" on it's own factory provided desk mount.I have the 49" on top of the 57 with this mount + an additional arm for a monitor/laptop off to the side. I'm using the arm for my work laptop so it's off the desk.I am a little disappointed in the setup. I wish the mount was a little bigger (or offered a fatter mount). I wish the mount pole was taller. I can barely get the 49" to sit above the 57". Even with the 2x4 between the desk and the mount.The arms themselves are very impressive. 5/5 on the arms. 3/5 on the mounting system itself (base + pole height). Pole is sturdy. No issues there. Needs an optional bigger / heavy duty mount and a taller pole.If you want to get this for 2x 57" samsung's ... look elsewhere or custom make your own mounting system and use these arms. The arms are 5/5. no issues there! The mounting system is meh.
Jonathan
Reviewed in the United States on April 3, 2025
Easy to assemble. Allows me to easily mount my 34 inch ultrawide in a stacked configuration over my 49 inch Odyssey G9.
J8
Reviewed in the United States on December 28, 2024
Arm was about to break off just with mounting the monitor. Absolute pain to assemble and even worse to set up and you will scratch up your monitor in the process.Fits a 1 3/4 in desk just fine but no point if it’s just going to tilt over. I tightened the lower bolts more than enough and it would barely hold its own weight.If you’re getting this to mount a 1600 dollar monitor you can spare the extra few bucks to get a mounting arm that will actually work.
ScottiJT
Reviewed in Australia on December 21, 2024
Works well, sturdy build and works fine even with the 57” G9 neo 👍🏻
Customer
Reviewed in the United States on December 20, 2024
This arm works great for Samsung 57. I was worried it would not hold it up, or giggle on my desk but no issues.Things I really like about it:1. The screw to adjust the angle of the monitor. I have had other arms that would let the screen tilt forward and was always a pain to get just right or if it got bumped it would face down and I would have to bend it back into position and it was always difficult. With this one there is an allen screw to adjust the forward tilt and, wow, all arms should use this method. Not only does it not dip when I touch the monitor but you can easily dial in the angle. Nice job.2. It comes with a nice allen tool and has 2 bolts to secure it to the desk. It holds really tight and appears it will hold on and would likely break my desk off before loosing grip.The quality is great.
Marius H.
Reviewed in Germany on December 19, 2024
I buyed this arm because I have an unusual setup: I want to have an ultrawide curved screen OVER my three screens (below). I found this arm that promised everything I need.And I can happily say, that this arm is very good. Everything is made out of metal and the quality feels very good. The manual is also pretty good and easy, with helpful notes as well.My setup works and I can freely move my screen around if needed. It is very stable, nothing moves, everything holds in place.
Karl R.
Reviewed in Canada on November 25, 2024
Does exactly what it says on the tin.This monitor arm is a powerhouse when it comes to holding larger monitors, especially ultra wides. I’ve been through a number of arms in the past and always decided against them because something was always lacking. But this ticked all the boxes.If you’re in the market for something more heavy duty, look into this one. I know the price deterred me a little in the beginning, but honestly, you’re paying for premium and that’s exactly what you get with this.Well worth the investment.
George Z.
Reviewed in the United States on November 15, 2024
The media could not be loaded.
Recommended Products