Your cart is empty.
Your cart is empty.Product Description
Model: HB7116P-KT
Our brand: HBT
Application:
- Furniture
- Upholstery and bedding
- Picture frame backing
- Tracking
- Home insulation
- etc.
HBT Air Stapler Kit
22GA Fine Wire Stapler
- Compact and light wight die-casting aluminum body
- lightweight and easy to use
- Powerful strength and excellent durability
- Package contains 1 x Air stapler and Staples
Warning: This mode(HB7116P-KT)doesn’t have a safety. When using pneumatic stapler, basic safety precautions should always be followed to reduce the risk of personal injury.
Air compressor needed but not included.
More details
Easy jam release
Tool-free jam release to quickly and easily clear nail jams. Use 22 GA 3/8-inch (9mm) crown staples from 1/4" to 5/8" in length.
Actuation: single shot
Place tool nose on your work piece and then pull trigger.
Rear exhaust
Rear exhaust directs air and tool oil away from user and work piece.
Operating pressure: 60-100 PSI
Before using it, connet the tool to the air supply. Make sure the air pressure is in correct range.
bmedicky
Reviewed in Canada on June 6, 2024
This is quite good for the price. Everything in the package is exactly as described. The fit and finish of the gun is decent; the only thing I don't like is the thin plastic trigger: would definitely have preferred a metal one. A well-written set of instructions in legible English is a pleasant surprise. Nice to get the wrench required to unscrew the top cover for future maintenance as part of the package, along with oil and staples. In my first use I fired over 120 staples in a short time and the gun worked perfectly: no misfires or jams and all staples driven very consistently. Depth of drive is set by tweaking the pressure in the air hose. Unlike many other air nailers/staples, the gun has zero safety features, but in fairness is not advertised as having such things. There is no tip safety that requires the nose to be contacting something before it fires, nor is there a secondary lever that has to be pressed to free up the real trigger. Keep your wits about you as you use this thing, wear safety glasses and you'll be fine.
Richard Gardner
Reviewed in the United States on June 26, 2024
I purchased this stapler as I already owned a compressor and wanted to try my hand at reupholstering an old chair. The reviews were favorable as was the price, so I figured, "Why not?" Not only was the stapler of great quality, but it arrived with an assortment of staples, oil and two tools for maintenance. Instructions were basic but sufficient, so I got to work. The tool is lightweight, easy to maneuver, and did not jam. It shot the staples cleanly and easily and delivered exceptional results! It is true that it does not have a safety, but common sense and respect for the tool are enough...it is a solid product. I will be looking for other projects to use this stapler as I'm pleased with the value, quality and performance.
James L.
Reviewed in the United States on May 27, 2024
Works exactly as I hoped it would!! Easy to load, easy to clean/clear, if it jams. I ran through about 5000 staples in rapid succession without fail!
Francisco
Reviewed in the United States on May 16, 2024
Does the job. Exactly what I needed for my diy car interior projects
Bob
Reviewed in the United States on August 30, 2023
I'm redoing the interior on my 1970s era Little British Sports Car. Nothing exotic, just an affordable everyman's car.The interior panels are 1/8 board with padded vinyl attached. Some of it didn't fit properly and had to be redone. I looked for an electric stapler but they all used large and long legged staples, not usable for what I needed to do.I have a small pancake air compressor that I use to fill my tires with a long coiled hose so I figured I'd give it a shot. One big concern I had was the minimum staple leg length spec on this stapler was listed at 1/4 inch. The staples used on the thin boards for my car had only 1/8 inch legs. After receiving the stapler, I tried it out on some scrap and it worked just great. I had to be careful to push down at a 90 degree angle or the staples were not likely to go in properly. I must have run 300+ staples through this gun with only a couple of failures, and they were due to me not holding it at the correct angle.I'm very pleased.
R. Masten
Reviewed in the United States on February 25, 2023
The media could not be loaded.
Natalie Gariba
Reviewed in Canada on December 13, 2023
Awesome little gun. Fits perfectly in my hand. Worked perfectly for my application.
PITTSVILLE LAWMAN
Reviewed in the United States on March 24, 2022
Only drawback I found was that there is NO SAFETY. WHEN YOU PULL THE TRIGGER - ITS LIKE A GUN AND WILL FIRE AT WHATEVER IT IS POINTED AT. Must be used conscientiously and by someone who can appreciate potential danger. Otherwise its a GREAT little air stapler and does exactly what it was intended for. I WOULD BUY IT AGAIN.
Linwood
Reviewed in the United States on July 23, 2021
Good gun for the price. Jammed a couple of times, ut easy to fix. Recommend for hobbyist and occasional upholstery jobs.
JW
Reviewed in the United States on July 16, 2021
I had a little upholstery project and decided an air stapler would make it easy - and it did. This was a great little stapler and came with various sizes of staples and one that was included was perfect for my job. I'd recommend this for light use with no reservations - had no issues but you need to properly set your compressor for this tool (which is as expected with any air tool).
Recommended Products
$135.28
$ 57 .99 $57.99