Your cart is empty.
Your cart is empty.
🍀 Specification:
Color: Clear/Brown
Material: ABS Plastic
Size: 25cm(L) x 11.3cm(W)
Mounting Screw Diameter: 8mm
Mounting Hole Diameter: 10mm
Placement: Front, Left, Right
🍀 Fitment:
🔻 Fits for most Motorcycles / Bikes / Choppers / Crusiers / Touring with 8mm /10mm direct thread bolt. Such as:
【For Harley】: XL1200/XL883/FLSTSC/FLSTS/FLSTF/FLHRC/FLHR/FLSTFB/XR1200/VRSCA/VRSCDF/VRSCDX/VRSCB/VRSCAW/FLST/FLSTN/FXSTS/FXST/FXDB/FXS etc,.
【For Honda】: CB1300/CB1300ST/CB1000/VT1300/VTX/CB900/CB1100 X11 X4 XR400 VRX400 VT400S CB400FOUR CB400SF CB400SS CL400 V-TWIN MAGNA PS250 VTR250 XR230 GB250 etc,.
【For Yamaha】: XVS1300CA V-MAX FZ-1 XV1100 SR500 T-MAX FZX750 TDM850 SR400 SRX400 SRV400 XJR400R XV250 TT250R WR250R WR250X XT250X TW200 TW225 R-1Z DT230 etc.
【For Suzuki】: GSF1200S SV1000 GSX400 SV400 GSX400S KATANA 0 DR-Z400SM GSX250FX ST250 DF200E TS200R GS125E GZ125 DF125E GN125R YBR125 YBR250 etc.
🍀 Package included:
- 2 * Motorcycle Hand Guard
- 2 * Mounting Brackets (Left and Right)
- 2 * Extend Mounting Brackets
- 1 Set of Mounting Screws
🍀 Note:
1. No Installation Instructions Included. Professional Installation Is Highly Recommended！
2. Please check the size measurement chart carefully before making payment. Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)
Michael Budman
Reviewed in the United States on March 13, 2025
I liked these so much I got a second set for my other motorcycle. In order to install these, you will need to remove the nut at the bottom of your mirror post mount. Proceed with caution, use a lock or star washer, and reposition your mirrors after mounting is complete. Inspect the nuts at the mirror posts - AND the nuts on the shield mount before each ride!
Gary92883
Reviewed in the United States on May 20, 2024
These made a big difference and keeping my hands out of the wind. They were easy to install, and the quality is better than expected. Great value for the money.
M. D.
Reviewed in the United States on June 27, 2022
No instructions but easy assembly, bad part is that there is a burn/melt/scuff looking blemish on each shield that won't wipe off.
Customer
Reviewed in the United States on December 23, 2022
Installed on '94 Honda Magna.
Rebecca
Reviewed in the United States on January 6, 2022
Put these on my Yamaha star 950. I love them. The brackets needed some work to be able to fit. I still have to trim the extension bracket that I had to add. Both of the original brackets had to be straightened, the wind shield on the brake side fit fine, but the wind shield would not clear the clutch side. I had to add an extension to it for me to use the wind shields. Once on, they are really good at blocking the wind from my hands. Big help in 20 degrees and below weather.
porknbeans
Reviewed in the United States on February 26, 2021
firstly, the finish on the mounting hardware is horrifying. the chrome is lousy at best, and the poorly finished jagged edges can easily slice a finger open. my God, WHY??? there are numerous blemishes in the metal and i have to wonder in amazement how the person who electroplated these P.O.S didn't reject them out of hand. the plastic (Lexan?) shields seem well made. guess I won't actually put them to the test, because i simply can't bring myself to mount these ugly things on my bike. (not that I really could anyway, because, inexplicably, while the shields themselves are gently curved, the brackets are perfectly straight. WHAT??? China all the way.
erick
Reviewed in the United States on January 8, 2021
These things are made of the cheapest plastic ever invented. I put them together (with no instructions) and they cracked and fell apart. There is no protection between the metal and plastic. I didn't even bother putting them on my bike.
Robert P.
Reviewed in the United States on January 18, 2021
I RESEARCHED A LOT OF WIND GUARDS (NOT HAND GUARDS) AND THERE ARE FEW THAT ARE DESIGNED JUST FOR WIND. SOMETIMES IT'S DIFFICULT GETTING A GOOD FIT WITH A GENERIC PART. THESE FIT MY 2012 HD DYNA SWITCHBACK WITH MINOR ADJUSTMENTS. I ADDED A FLAT WASHER TO BETTER CLEAR MY TURN SIGNALS AND I WAS GOOD TO GO. THE AMBER LIGHT HITTING THE EDGE OF THE CLEAR SHIELD HAS A COOL EFFECT.
Recommended Products
